Spn1025
Banned
Back to this.
I'm pretty sure those are 2 of the RL Flo-Master 2204HD backpack sprayers.
Mine even had those pink stickers that said "hold for Spring Black Friday event"
Home Depot Clearance Thread 2016
- Thread starter ratchet_gear
- Start date
- Status
Back to this.
I'm pretty sure those are 2 of the RL Flo-Master 2204HD backpack sprayers.
Mine even had those pink stickers that said "hold for Spring Black Friday event"
RoundedCorners
Well-known member
- Joined
- Aug 23, 2015
- Messages
- 104
I've had some employees confirm as such when I pressed them on the issue. There were a few that seemed to know of the same deals as well. One guy was asking nicely if he could have one after I found the stash.
All in all, it seems like a race against time to snag a deal before they do. Our only hope is that they've missed it.
All in all, it seems like a race against time to snag a deal before they do. Our only hope is that they've missed it.
Fordman7795
Well-known member
Didnt even notice those in the pic. Whats the scoop on them?
mswol767
Well-known member
We might have to start talking seems like we cover the same stores..
Can't tell from photo on phone. Isn't it the top box wrapped in saran wrap that says recall?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I think we all do because I assume there will be times we'll all end up in each others area.
Its pretty cut and dry when there is ONE of something, but multiples? Not sure if we want to be cutthroat about it or share the wealth amongst each other.
We can take it to PM, no need to clutter the thread.
mswol767
Well-known member
Agreed.. if the CT folks want.. PM me your email address.. We can start a group email prob the best and easiest solution.
swoyer
Well-known member
Got lucky and found two paslode nailers this morning!
Used $20 off pro coupon and gift cards for additional 6 1/2% off, got out the door around $90 each.
Sent from outer space using Taptalk.
Used $20 off pro coupon and gift cards for additional 6 1/2% off, got out the door around $90 each.
Sent from outer space using Taptalk.
Full price in the Northeast.
Mrmaz
Well-known member
Talked with hd manager brinkman is out of Home Depot. All stuff to be clearances quickly. Our grills went 50% already.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
vartz04
Well-known member
Just spent 35 minutes wandering around with a department manager. He said if I let him have 1 of the 5 nailers he will call me if he finds them. We had no luck just found one reconditioned one and they wouldn't budge on the price of 100.03
Way better experience at that store than the one I grabbed the grill from. Guy told me the less inventory they have up top the better his life is so he likes us deal hunters.
Sent from my iPhone using Tapatalk
Way better experience at that store than the one I grabbed the grill from. Guy told me the less inventory they have up top the better his life is so he likes us deal hunters.
Sent from my iPhone using Tapatalk
Fordman7795
Well-known member
The top box labeled recall was the three grills that were still showing in inventory. I didnt even bother trying to get one.
FEVERinc
Well-known member
There are two stores within 30 minutes of me that are each showing an inventory of two of the 595512 paslode nailers... I don't really have a need for one and not really interested in profiting from it. IF someone here GJ needs/wants them I'll be willing to make a trip.
rpearlberg
Well-known member
Is that the finish nailer? I'd be interested in that one to either buy or trade you a framing nailer...
I don't want you to make a 30 minute trip just for me though!
FEVERinc
Well-known member
http://www.homedepot.com/p/Paslode-16-Gauge-Angled-Cordless-Lithium-Ion-Nailer-902400/203410132
Meh.. I need to pick up a few things from HD anyways.. going a little further to help out another member isnt a big deal to me. On that note, I'm ok on nailers. I realize these are probably better than the ryobi models but i really dont need them much
Meh.. I need to pick up a few things from HD anyways.. going a little further to help out another member isnt a big deal to me. On that note, I'm ok on nailers. I realize these are probably better than the ryobi models but i really dont need them much
thecody59
Well-known member
Is that the model on sale for $100?
How do you know it's showing stock? If it's from HD.com, be warned they will be full price when you get there.
And where do you get 595512?
FEVERinc
Well-known member
Ah... so I need to look for them at stores without any showing in stock?
I saw everyone else talking about seeing it in stock.
There is really no good way without being in store.
The item not showing in stock on HD.com is a start though. When items go clearance, they no longer show stock on HD.com. With that said, however, just because an item comes up as not stocked in store doesn't mean it is on clearance, or that the store ever stocked it at all.
Sorry if I am confusing you.
FEVERinc
Well-known member
Great... I'll go check today for some anyways. I'll buy one or two in case someone here needs one they can pay shipping.
trialrun
Well-known member
if anyone scores an extra angled finish nailed and would like to sell it, let me know. Went to 3 HD's yesterday, none of which had them marked down
CobraChevelle
Banned
Home Depot.com has Husky 28" 2-Drawer Utility Cart (Black) on sale for $39.88
found on slick deals
found on slick deals
RRich
Well-known member
If you're going to the Orange City store, I doubt they'll be discounted. I got all excited last week when I found the Echo blower but after lugging it to the SCO it rang full price.Great... I'll go check today for some anyways. I'll buy one or two in case someone here needs one they can pay shipping.
Spn1025
Banned
Oops. Quincy, MA. They tried to claim it was store use, but it was tagged.
Missing the tubes, but whatever
Sent from my iPhone using Tapatalk
Missing the tubes, but whatever
Sent from my iPhone using Tapatalk
Oops. Quincy, MA. They tried to claim it was store use, but it was tagged.
Missing the tubes, but whatever
Sent from my iPhone using Tapatalk
Tagged with real SKU or recon SKU?
posaune
Well-known member
What about just starting our own thread? I'd like to be involved, but I already have so many emails coming in that I'm not sure I can follow more. That way new CT on GJ people can see it too.
GasEngineer
Well-known member
PM me if anyone is interested in trading a Paslode nailer (preferably a finish nailer) for a new Proto socket set.
http://www.amazon.com/gp/product/B00BU4K9EW/?tag=atomicindus08-20
I can cover shipping for both.
http://www.amazon.com/gp/product/B00BU4K9EW/?tag=atomicindus08-20
I can cover shipping for both.
Last edited:
Oops. Quincy, MA. They tried to claim it was store use, but it was tagged.
Missing the tubes, but whatever
Nice job. The orange paint usually does indicate store use in my experience but if they tagged it then it should be for sale.
If you're around Orlando there was a penny 36" vanity at W Colonial last week. I had no way of getting it home so I left it. It was in the appliance section with a $73.03 tag.
Central Florida stores do seem to be run a lot tighter than some other areas of the state. I did find a temp2o kit, tile blades, some work lights, and fire ant killer last week though at 5 stores in west Orlando.
FEVERinc
Well-known member
swoyer
Well-known member
I saw that. Didn't know I was stepping on anyone's toes in this area! I got two from somewhere up there. Right near Bensalem.
Sent from outer space using Taptalk.
rpearlberg
Well-known member
can't wait for the play-by-play of this. Good luck!
I can't find any of those things in polk...
I hear you. I stopped by one Lakeland store and left empty handed
vartz04
Well-known member
Wait til the SCO person is busy and then lift them up and scan yourself. Drop pennies in and hurry up out of there. Don't end up like me wasting a fricken hour
Sent from my iPhone using Tapatalk
Wow. That was easy and very pleasurable.
Decided to head to CS and asked for MOD. Told him I had two grills that would ring up as a penny and how he wanted to handle.
He scanned them thinking I was bullshitting and when he saw they were ask described he cut out the barcodes and said have a great day. Also thanked me for not making a scene at the registers.
Sent from my iPhone using Tapatalk
Decided to head to CS and asked for MOD. Told him I had two grills that would ring up as a penny and how he wanted to handle.
He scanned them thinking I was bullshitting and when he saw they were ask described he cut out the barcodes and said have a great day. Also thanked me for not making a scene at the registers.
Sent from my iPhone using Tapatalk
- Status