Found a deal on craigslist? - List Here!

[macgee]

http://peoria.craigslist.org/cto/5514570054.html
1992 Ford F150 - $800

Sorta considering calling on this one. It's not cool but... it is a very cheap truck.

Great find Fir,

For $800 it's a no brainer. Out here they sell for $1,500-$3,000. Just check the compression and ******.

Like Mohawk says, it would make for a great runner. If you end up not liking it, it should a easy sell.

Just make sure you drive it like you stole it.

 

[lutter94]

http://miami.craigslist.org/brw/tls/5514460547.html

$15 -

 

[firworks]

Great find Fir,

For $800 it's a no brainer. Out here they sell for $1,500-$3,000. Just check the compression and ******.

Like Mohawk says, it would make for a great runner. If you end up not liking it, it should a easy sell.

Just make sure you drive it like you stole it.

It's still up... Really tempted. Do people typically let you check compression when buying a used vehicle? I'd be worried about breaking off a spark plug if they're old and grodilated on somebody else's vehicle.

Also I found this one for 800$ too:
http://peoria.craigslist.org/cto/5515088090.html

Or this one:
http://peoria.craigslist.org/cto/5515063231.html
It's the same age as me!

 

[SkinnyG]

Great deal on a Miller Dynasty welder in Jacksonville, FL. $1,250
Not sure the guy needed to tell his life story in the ad, but:

http://jacksonville.craigslist.org/tls/5516222767.html

 

[04chase]

Great deal on a Miller Dynasty welder in Jacksonville, FL. $1,250
Not sure the guy needed to tell his life story in the ad, but:

http://jacksonville.craigslist.org/tls/5516222767.html

Dam , I am looking for one and that is a deal. Really want the 210 dx but for that price I'd settle.

Sent from my SM-G900T using Tapatalk

 

[larryq]

Vidmar clone ("Spectrum") cabinet for $100 in El Cerrito CA. On a homemade cart with casters and some folding shelves:

http://sfbay.craigslist.org/eby/tls/5515944224.html

"roller bearing drawers rated at 100lb"

 

[macgee]

Vidmar clone ("Spectrum") cabinet for $100 in El Cerrito CA. On a homemade cart with casters and some folding shelves:

http://sfbay.craigslist.org/eby/tls/5515944224.html

"roller bearing drawers rated at 100lb"

Larryq,

You are always finding the good deals, nice job.

For $100 bucks, it's hard to go wrong with this cart on wheels. Certainly worth an extra $50 alone for not being red!

This typical cabinet wanna be a vidmar when it grows up looks almost the same as my Harbor Freight box with the lightweight clip on sliders, He's certainly pushing the limits on creative license in the description for even mentioning Vidmar (apples & oranges) But the best part is the custom welded cart and trays that the cabinet is mounted on, the second tray down looks like it was for collets. This could be a very useful cart for someone who has a small lathe and mill in their garage holding tooling and inspection gear, just needs to be cleaned up.

 

[macgee]

Tool/Storage Box- Split Top - $95 (Encino)

Here's another cart for someone in So Cal that has just been posted for around the same price. Not sure of the quality, it's made by MMP Medcart, these are general good quality especially if it's metal and not hard plastic like a lot of the new crash carts. It has split-top opening that slides out from the center with storage underneath similar to Snap-On and Matco mechanic carts.

Dimensions: 28" х 22" х 41"

"This is a box with drawers and may be used for tools or any other application that requires mobile storage. It features 4 drawers that have very good ball bearings and a deep storage area under spreadable top surface. The box is made from very sturdy steel and has great casters."

http://losangeles.craigslist.org/sfv/tls/5516998881.html

 

[macgee]

Athol #614 4" vise already Restored $60 (West LA, CA)

For $60 (almost $1/pound), this is a good deal for a vise that has already been cleaned up and restored. I don't see any cracks or welds, handle looks straight, I don't see any damage, the slide & jaws look great, seller says the jaws line up. If backlash is minimal, then you're good to go. These weigh 50 lbs

"4 inch athol bench vise
Very good condition
Jaws close evenly"

http://losangeles.craigslist.org/wst/tls/5511285243.html

 

[larryq]

Athol #614 4" vise already Restored $60 (West LA, CA)

For $60, this is a good deal for a vise that has already been cleaned up and restored. I don't see any cracks or welds, handle looks straight. If backlash is minimal, then you're good to go.

$60 for that, hard to do better. Thanks for the nice words earlier; I've got a ways to go before matching your output..

 

[macgee]

$60 for that, hard to do better. Thanks for the nice words earlier; I've got a ways to go before matching your output..

Larry,

Don't sell yourself short, you've been doing great and I would have easily have jumped on bunch of your deals if I lived closer. Thanks for posting them. Cheers!

 

[jeffwidman]

Current listed price is $120 on that Spectrum toolbox with hand-welded cart. Wonder if he thought better of it and raised the price, or got a flood of interest and so jacked the price?

 

[catalytic]

200lb Swivel Jaw Vise -- $300
Location: Upper Peninsula

http://up.craigslist.org/tls/5516875675.html

The coat of still wet rattle can black is included.

 

[larryq]

Current listed price is $120 on that Spectrum toolbox with hand-welded cart. Wonder if he thought better of it and raised the price, or got a flood of interest and so jacked the price?

Interesting. Hard to believe someone would try to squeeze an extra $20 out of a $100 listing if they were getting flooded, but CL has all kinds.

 

[PCMusicGuy]

http://houston.craigslist.org/tls/5519456294.html

Smoking deal on a Snap-On box about an hour out of Houston.

 

[Bogash]

http://houston.craigslist.org/tls/5519456294.html

Smoking deal on a Snap-On box about an hour out of Houston.

That IS a smoking deal. I'm on it. That's worth the drive from Dallas and back. I've been looking at those for months and could get no one even close to under 700 for beat up ones. I sent her a text. I'm probably too late......

 

[Shiftless]

Gotta be either a scam or she forgot a zero.
Isn't the top by itself worth two fifty?
Posting as of now says listed 8 hours ago. Who in their right mind WOULDN'T buy it right away if he lived anywhere nearby? Unless maybe it was stolen...?

 

[Bogash]

Gotta be either a scam or she forgot a zero.
Isn't the top by itself worth two fifty?
Posting as of now says listed 8 hours ago. Who in their right mind WOULDN'T buy it right away if he lived anywhere nearby? Unless maybe it was stolen...?

I'm 253 miles away. I sent "her" a text... I have been shopping for a MAC or Snappy like that for a long time.

 

[zporta]

Browsing for garage cabinets and organization and saw this

https://baltimore.craigslist.org/bfs/5503115997.html

 

[PCMusicGuy]

That IS a smoking deal. I'm on it. That's worth the drive from Dallas and back. I've been looking at those for months and could get no one even close to under 700 for beat up ones. I sent her a text. I'm probably too late......

Gotta be either a scam or she forgot a zero.
Isn't the top by itself worth two fifty?
Posting as of now says listed 8 hours ago. Who in their right mind WOULDN'T buy it right away if he lived anywhere nearby? Unless maybe it was stolen...?

I'm 253 miles away. I sent "her" a text... I have been shopping for a MAC or Snappy like that for a long time.

If I had any way of picking it up, I would have been all over it as well, even though I don't have the room for it. Hopefully one of you guys are able to snag it.

Browsing for garage cabinets and organization and saw this

https://baltimore.craigslist.org/bfs/5503115997.html

That is a pretty nice cabinet! Tons of possibilities with that for sure.

 

[marius_nortje]

Got this for $70 today,been looking a long time

Sent from my LG-LS980 using Tapatalk

 

[larryq]

Got this for $70 today,been looking a long time

Sent from my LG-LS980 using Tapatalk

That's great, post it up in the general tools forum. This one is more for showing current deals that other GJ members can take advantage of.

 

[larryq]

Kennedy top and bottom set for $65 in Sacramento CA:

http://sacramento.craigslist.org/tls/5519887079.html

 

[Spn1025]

NEW HAMPSHIRE

Drill press - $125 (Ossipee,NH)
(Rockwell) "works great"

http://nh.craigslist.org/tls/5519849951.html


Rigid Drill Press - $200 (Greenfield)

http://nh.craigslist.org/tls/5520045203.html


Delta benchtop Drill Press - $70 (portsmouth)
"Low hours, works great. For 80$ I'll include the stepper bit in the pic."

http://nh.craigslist.org/tls/5505369086.html


10 DRAWER MAP FILE CABINET / LIGHT DUTY TOOL CABINET - $120 (Manchester)
Selling this 10 drawer map drawer file cabinet. Also good for small part storage or light duty tools.
Over all dimensions, 43.5" wide, 33.5" deep, 37.5" high
Draw dimensions, 39.5" wide, 28.5" deep, 2" high

http://nh.craigslist.org/tls/5511793580.html


MASSACHUSETTS:

Snap-on Tool Box - $800 (Arlington, MA)

http://boston.craigslist.org/gbs/tls/5520380939.html

Metal Cabinet - $150 (Lawrence)

http://boston.craigslist.org/nwb/tls/5511939772.html

Dust Collector Cabinet - $400 (taunton)
2 Cabinet dust collectors
$400 each
Aget Model 520 --23 x 18 x 24" tall --4" inlet--110 volt
Aget Model 1151--36 x 20 x 42" tall- 6" inlet - 220 volt- 3 phase

http://boston.craigslist.org/sob/tls/5496457066.html

 

[Shiftless]

Looks like the $250 snap on box find posted by PCMusicGuy was just some smoke. Listing has been flagged off of C/L which usually happens to scammer listings. I hope no GJ members wasted too much time or fuel chasing down this fake deal.

 

[PCMusicGuy]

Looks like the $250 snap on box find posted by PCMusicGuy was just some smoke. Listing has been flagged off of C/L which usually happens to scammer listings. I hope no GJ members wasted too much time or fuel chasing down this fake deal.

Good to know.

 

[ineedtools]

Looks like the $250 snap on box find posted by PCMusicGuy was just some smoke. Listing has been flagged off of C/L which usually happens to scammer listings. I hope no GJ members wasted too much time or fuel chasing down this fake deal.

Just an FYI, there are a TON of people out there that will flag an ad after they've made contact just so no one else can get it.

It only takes two flags from two devices to do so. Flag it on you hope PC and on your phone from 4G and **** it's gone.

 

[CNGsaves]

This could be bargain if bargain price down a bit and bottle is full of welding gas.

Region Midwest USA

Location Joplin, MO

Item Hobart Handler 175 mig welder (240v)
Includes 4 drawer welding cart/cabinet . . AND . . large argon bottle w/ regulator.

Price $ 500

Link
https://joplin.craigslist.org/tls/5515161086.html

Hobart handler 175 mig welder with toolbox cart with casters and large argon bottle with regulator. Works excellent no issues at all - - - - $500 for whole setup.

 

[CNGsaves]

Any GJer know what model this is ?? Don't know if bargain or not.

Region Midwest USA

Location Joplin, MO

Item Wilton metal cutting BAND SAW


Price $ 800 OBO

Link
https://joplin.craigslist.org/tls/5515160598.html

Metal cutting band saw
New condition
$800.00 OBO

 

[whateg01]

This could be bargain if bargain price down a bit and bottle is full of welding gas.

Actually, as long as he has proof the bottle is owned, it's a great price as is. If I had a need, I'd consider the drive from Wichita.

Dave

 

[CNGsaves]

^ ^ That's what I thought as I paid $140 for 80 cf bottle about 75% full. That bottle looks bigger than mine.

Maybe a GJer in that area can go check it out for a deal.

 

[Mohawk Dave]

http://inlandempire.craigslist.org/tls/5523675703.html

 

[zkling]

Any GJer know what model this is ?? Don't know if bargain or not.

Region Midwest USA

Location Joplin, MO

Item Wilton metal cutting BAND SAW


Price $ 800 OBO

That's wilton's version of the roll-in bandsaw, D9040-1 I believe. If it truly is as new, I'd say it is pretty good. I don't think they make that model anymore.

 

[larryq]

$20 Shopsmith drill press in Livermore, CA.

http://sfbay.craigslist.org/eby/tls/5523713941.html

"Model 10ER. Works. Casters on home-made base. 1/2" chuck. As pictured, no other accessories."

 

[larryq]

http://inlandempire.craigslist.org/tls/5523675703.html

For posterity, a vintage Craftsman stick welder, 230V / up to 180A.

 

[jeffwidman]

$20 Shopsmith drill press in Livermore, CA.

http://sfbay.craigslist.org/eby/tls/5523713941.html

"Model 10ER. Works. Casters on home-made base. 1/2" chuck. As pictured, no other accessories."

Thanks! I've been looking for a cheaper Shopsmith as I need the space saving of it--not much room in my shop. I emailed him, hopefully I can pick it up tomorrow.

 

[larryq]

Thanks! I've been looking for a cheaper Shopsmith as I need the space saving of it--not much room in my shop. I emailed him, hopefully I can pick it up tomorrow.

Perfect, hope you get it!

 

[dkroth]

5hp speedaire compressor - $100

http://rochester.craigslist.org/tls/5524362285.html

 

[Waggoner72]

Vintage S-K Tools display rack. Great for shop or repurpose
http://littlerock.craigslist.org/tls/5525477487.html

 

[macgee]

Craftsman 1/2 hp Disc sander & belt grinder for sale - $50 (Hermosa Beach)

http://losangeles.craigslist.org/wst/tls/5523594816.html