NOS Bondhus & Zephyr 28pc Bit Sets for $7ish

[bmwpowere36m3]

Bump, anyone know if these can be used in an impact? Will they hold up? - Paul

Impact driver (smack w/ hammer) or electric impact driver? Probably as good as other bit (Zephyr is real good), but realize it'll be a consumable item.

 

[pauls_workshop]

Impact driver (smack w/ hammer) or electric impact driver? Probably as good as other bit (Zephyr is real good), but realize it'll be a consumable item.

Thinking of a 1/4" 18v impact driver (Ryobi). I use most of the time with any bit these days. Not sure if any or some of these are impact rated. Comes down to the durability and long term wear as you say. - Paul

 

[pauls_workshop]

So I got the Bondhus kit today and some other Zephyr bits. I have to say I really like these alot. Very high quality. The seller still has a bunch of the Bondhus sets and others. I can recommend these. - Paul

 

[Spn1025]

Got my 2 yellow bit driver handles today. They seem pretty nice, especially for the price.

 

[TK-421]

Alright, time to educate the new guy. These are honest questions, I'm not being sarcastic, I'm new to all this and don't know what makes them so special or sought after.

Why should I buy these? What makes them so special? Why are they worth the money?

If they're good, and you can help me understand why, then I'll pick up a set of bits and drivers, as I might need a set in the future, and buying now at a low price is better than buying in the future at a high price.

 

[Car_Guy]

Alright, time to educate the new guy. These are honest questions, I'm not being sarcastic, I'm new to all this and don't know what makes them so special or sought after.

Why should I buy these? What makes them so special? Why are they worth the money?

If they're good, and you can help me understand why, then I'll pick up a set of bits and drivers, as I might need a set in the future, and buying now at a low price is better than buying in the future at a high price.

They are just really good bits, in the metallurgy and the design. The Philips bits all have extra grooves to help them bite into the fastener. With higher grades of metal they should take more torque without failing (and help resist caming out due to failure of the bit material)

I have not confirmed it, but I would assume they hold better tolerances on their bit sizes as well, so they should fit in their respective fasteners better.

 

[Car_Guy]

FWIW, McMaster Carr sells Zephyr bits. They do not list the brand, but rest assure they are Zephyr. That is where I buy all mine from.

Either way, this is still a great deal.

Which bits are you buying from Mcmaster that are Zephyr? they had lots of different grades and I know at least some of them are not Zephyr

 

[pauls_workshop]

Got my 2 yellow bit driver handles today. They seem pretty nice, especially for the price.

Those are Piquick made from Canada for sure, similar to these:

https://www.homedepot.ca/en/home/p.super-8-plus-multi-bit-screwdriver.1000428687.html

Real good quality drivers. Real good for the price but they don't come with the bits, so have to get those separately. Back when I had a bunch of Sears points I would get the Piquicks through Sears for next to nothing. Haven't bought a thing from Sears now in about a year!

Also, those Klein like electrical combo flat/phillips drivers are good too and I think they are made by the same source as the Kleins. I got a pair of those as I didn't have any combo type driver for the electrical screws that use these. They look just like Kleins. - Paul

 

[Spn1025]

Those are Piquick made from Canada for sure, similar to these:

https://www.homedepot.ca/en/home/p.super-8-plus-multi-bit-screwdriver.1000428687.html

Real good quality drivers. Real good for the price but they don't come with the bits, so have to get those separately. Back when I had a bunch of Sears points I would get the Piquicks through Sears for next to nothing. Haven't bought a thing from Sears now in about a year!

Also, those Klein like electrical combo flat/phillips drivers are good too and I think they are made by the same source as the Kleins. I got a pair of those as I didn't have any combo type driver for the electrical screws that use these. They look just like Kleins. - Paul

Well considering HD Canada has it for $23 (whatever that comes out to in $US), I guess I made out pretty good for 2 at $7.50 lol.

I was gonna put in for those screwdrivers also, but I really don't care for the combo Phillips/slotted tip.

While we're on to odd-ball screwdrivers, he has a set of 2 wood handle tri-wing screwdrivers for the same price $10.99 OBO. The only thing I know of that uses tri-wing is some Nintendo stuff

 

[wiz2001]

I am the ebay seller on bondhus and zephyr tools, and martin aircraft. my ebay id is wiz2001. i will try to post links on all future listings, or just subscribe to my ebay store. any suggestion is welcomed.

 

[Spn1025]

I am the ebay seller on bondhus and zephyr tools, and martin aircraft. my ebay id is wiz2001. i will try to post links on all future listings, or just subscribe to my ebay store. any suggestion is welcomed.

Thanks for the great product, great price, and super fast shipping!

 

[B_Bimmer]

I am the ebay seller on bondhus and zephyr tools, and martin aircraft. my ebay id is wiz2001. i will try to post links on all future listings, or just subscribe to my ebay store. any suggestion is welcomed.

I concur, one of the best ebay sellers I have ever dealt with. Communicates, and actually knows how to package tools so they don't get lost in the mail.

 

[catalytic]

I am the ebay seller on bondhus and zephyr tools, and martin aircraft. my ebay id is wiz2001. i will try to post links on all future listings, or just subscribe to my ebay store. any suggestion is welcomed.

^^ Mine arrived 1 business day after payment with an exceptionally good packing job. Thanks!!

 

[wiz2001]

screw knocker" and "old man". used with a rivet gun and screw bit to remove stuck aircraft screws, btw, this is the ebay seller on bondhus and zephyr bits, tons more will be listed, just gotta figure out how to use this forum, any suggestion is welcomed.

 

[Daniel831]

Great seller, super fast shipping and also included a few freebies in my order. Word of warning though on the "Zephyr ACR Portable Pocket Driver/ 6 bit Screw Set Made In USA", the plastic bit holders have dried/shrunk and they don't stay in place rendering the whole thing useless other than the bits.

 

[Spn1025]

So does anyone know what else those wood handle tri-wing screwdrivers would be used on other than some Nintendo stuff? I've never seen those kind of screws

 

[wiz2001]

thanks, daniel, need to note that on ebay. i have 100s of tri wings, so if you guys buy multiple items i will include those as freebies. also i cannot accept offer of single purchase at $5, 6, 7 or even $8 because after shipping, ebay, and paypal fees, there is nothing left. best way is to go through the store and buy multiple stuff and i can throw in lot of freebies.

 

[bryan750]

I got my order quick and I appreciate the freebies.

 

[catalytic]

So does anyone know what else those wood handle tri-wing screwdrivers would be used on other than some Nintendo stuff? I've never seen those kind of screws

Some apple laptops take tri-wings when you disassemble to replace the batteries or to get to the heat grease / logic board. Not a common fastener on machines, though.

 

[KnurledNut]

Wiz2001 or others,
Will the combo screwdrivers fit the screws on household outlets?
The standard ECX is a No. 1 square and slotted.

If these do fit, you might increase sales by stating these are ECX drivers on your ebay listing.
I currently use Milwaukee, as options are few.
Thanks...
Knut

 

[Speed-Racer]

Hello Wiz2001,

Received my order this week. Excellent packaging and I was surprised to see the free items. The bondus drivers are a great deal.
You should also list specials on the free Garage Journal Classifieds section and use paypal.

Welcome to the board.

Thanks again

 

[wiz2001]

screw knocker" and "old man". used with a rivet gun and screw bit to remove stuck aircraft screws

 

[wiz2001]

He went $6.75 for 5 sets.

on another note can anyone well me what this is for?

http://www.ebay.com/itm/Chrome-Palm...263087?hash=item4b018864af:g:pbsAAOSwNyFWb01g

A helpful ebay buyer told me these are.
screw knocker" and "old man". used with a rivet gun and screw bit to remove stuck aircraft screws.
sorry guys, messing up on replies. I am new to forums. and i lack knowledge in tools.

 

[pauls_workshop]

Hello Wiz2001,

Received my order this week. Excellent packaging and I was surprised to see the free items. The bondus drivers are a great deal.
You should also list specials on the free Garage Journal Classifieds section and use paypal.

Welcome to the board.

Thanks again

I've encouraged Wiz to also post on the Ebay Permathread so folks can see the listings there. Thx Wiz, you are one of the good guys! - Paul

 

[mikebaker1129]

I sent in some offers on a bunch of stuff.
The drivers must be sold out.
My offers were all accepted.
I am glad the seller posted here and gave us the run down on what he can and cannot accept and why.

 

[wiz2001]

i am down to about 50 bondhus 28 piece sets. i still do have about 20 other sets that are somewhat rusted and few bits missing here and there. Anyone interested can send me message on ebay. Also i have tons of martin aircraft rivets, etc. would appreciate it if someone is willing to start a thread regarding martin aircraft stuff. Thanks for the help and buys.

 

[wiz2001]

I sent in some offers on a bunch of stuff.
The drivers must be sold out.
My offers were all accepted.
I am glad the seller posted here and gave us the run down on what he can and cannot accept and why.

your items are going out today, added some freebies and bits, you should get it within 2-3 business days, perhaps, by saturday. thanks for purchase.

 

[sld961]

Just ordered some double headed Phillips bits. Thanks Wiz2001.

 

[tjpavlov]

Got my order..... great packaging and the bits are really nice.

 

[southalabama]

I got several sets of the combo drivers and a couple packs of the zephyr bits. Great price well packaged and a couple free items. Thanks

 

[mikebaker1129]

your items are going out today, added some freebies and bits, you should get it within 2-3 business days, perhaps, by saturday. thanks for purchase.

Awesome.
I am sending you a message about the rusty/kissing bit sets.

 

[outdoorspace]

Cool beans, accepted my offer of three sets at $8/pc. Thanks.

Glad I got in before you sold out.

 

[sld961]

Got my bits today plus some freebies. Thanks!

A note to people looking at the double ended philips bits: they do not click into a 1/4" impact driver. They fit, but the head is too long to latch. I assumed they would latch because they have a groove on both ends, but I was wrong.

 

[priceman1414]

Made an offer of $9.00, hopefully there's a decent set left.

Update - offer accepted.

 

[wiz2001]

guys, i appreciate all the awesome feedbacks on ebay. Let me know if there is anything I need to do to provide better service. have a great 4th of July.

 

[mikebaker1129]

The same seller ^ has tons of Martin riveting tools for aircraft.

 

[pauls_workshop]

Got my bits today plus some freebies. Thanks!

A note to people looking at the double ended philips bits: they do not click into a 1/4" impact driver. They fit, but the head is too long to latch. I assumed they would latch because they have a groove on both ends, but I was wrong.

I noticed that too. I think if you just use an extension though, they may be ok. I haven't done it yet. - Paul

 

[d.mcfarland]

I got a set. Great buy. Glad wiz joined here to give a shout out! Great eBay seller by the way. Really can't ask for more from him!

 

[KnurledNut]

Got my bits today plus some freebies. Thanks!

A note to people looking at the double ended philips bits: they do not click into a 1/4" impact driver. They fit, but the head is too long to latch. I assumed they would latch because they have a groove on both ends, but I was wrong.

What about grinding down one end?

 

[sld961]

What about grinding down one end?

Could do that if I decide I can't use them as is, but then you lose half of the ends.