Show your new tool arrivals

[walkerbait]

Picked up the Snap On SOEXL large size wrenches. Paid $120 shipped off Ebay.

All are brand new with 2014 date code.



Now to find the 3/8-3/4" set for a good price!

Got mine today as well! Beautiful wrenches. I got the SOEXL707 set brand new from a guy in Texas for a pretty good price. I don't know if he has any more, but I can share his contact info by pm if you want it.


Sent from my iPhone using Tapatalk

 

[cliftonbros89]

Where can we find this box and the asking tag? For the 72"?


Sent from my iPhone using Tapatalk

You can find the list price and boxes on the John Deere website if you do enough searching. Or a dealer could get you info too.

 

[one9gt]

Gonna put it through the paces today... will put up a review in a bit


Sent from my iPhone using Tapatalk

 

[ChrisOdden]

Scored a small(Taiwan) Bahco Ratchet for free today.
S61sl

 

[Dr.JohnnyFever]

 

[hoston23]

just a few things ive bought in the past 2 weeks, new tool display board for my snap on punches, i plan on filling the board one day, new scan tool that i really need for my dads fleet trucks, and i traded in my basic battery tester for the enhanced because the basic doesn't test 6V batteries and i need to test 6V JD 4020 batteries at work.

 

[Finky198]

Picked up the irwin deepwell extractors...
Great deal for $20 Thanks Dodge610

Still made in the USA


Awesome I've been waiting for someone
to do a lock n lube review...

 

[NoahG]

Oh yeah. 1/2" slotted "stubby".


Sent from my iPhone using Tapatalk

 

[Cope]

Bought this kr650 &655 tonight to keep my kr1000 company.

Nice boxes, are they ball bearing slides?

 

[jfcasey]

Gonna put it through the paces today... will put up a review in a bit


Sent from my iPhone using Tapatalk

Those are great but watch out for bad zerks if you're using it with a power greaser. With all the pressure built up in the grease gun you have a ***** of a time getting those to release. I usually end up cracking the line loose off the gun to let some pressure out so I don't bend the **** out of the coupler.

Sent from my SM-G935V using Tapatalk

 

[davethorik]

Picked this up tonight, going to demo a brick chimney tomorrow. Mayhew USA Guardian chisel 3/4 × 12.

 

[cliftonbros89]

Gonna put it through the paces today... will put up a review in a bit


Sent from my iPhone using Tapatalk

If that doesn't work try this...
Plus they make a relief valve to tie into your line if you do get stuck on a bad fitting. It is a little expensive, but well worth the money. It'll fit in tighter spaces than that one.

 

[JMToolCo]

how do you like them I'm anxiously awaiting mine

 

[48548]

If that doesn't work try this...
Plus they make a relief valve to tie into your line if you do get stuck on a bad fitting. It is a little expensive, but well worth the money. It'll fit in tighter spaces than that one.

I love mine, the Canadian one works awesome.

Sent from my SM-N910V using Tapatalk

 

[MattVette89]

I love mine, the Canadian one works awesome.

Sent from my SM-N910V using Tapatalk

Yeah, but with the exchange rate you only get 75% of the grease

 

[Dr.JohnnyFever]

 

[avmaine]

New to me Flexzilla Pro compact impact...

man that is tiny huh

 

[one9gt]

If that doesn't work try this...
Plus they make a relief valve to tie into your line if you do get stuck on a bad fitting. It is a little expensive, but well worth the money. It'll fit in tighter spaces than that one.

The relief valve would be worth it alone... I'm not too worried about the size of this one as most of my zerks are easily accessible or I now have an excuse to use up all my 45/90 degree ones that have been sitting on my spare parts shelves. I think I'll order up the valve and stop by my local hydraulic shop and fab up a 60" hose.


Sent from my iPhone using Tapatalk

 

[zzzz]

New impact wrench and drill...

 

[cliftonbros89]

The relief valve would be worth it alone... I'm not too worried about the size of this one as most of my zerks are easily accessible or I now have an excuse to use up all my 45/90 degree ones that have been sitting on my spare parts shelves. I think I'll order up the valve and stop by my local hydraulic shop and fab up a 60" hose.


Sent from my iPhone using Tapatalk

That's the set up I'd go with

 

[mjoekingz28]

You have done up and went and done it!

 

[thegroundpounder99]

Lang retractable banana jacks lead set [emoji106]


Sent from my iPhone using Tapatalk

 

[Snakebyt]

Picked up my replacement screwdriver handle and the 1/4" driver I ordered:



Merry Christmas from my Snap On dealer.... greatest socks ever...

I got some socks as well from my dealer... and you are right, they are amazing

 

[bpankratz]

Oh yeah. 1/2" slotted "stubby".

Sent from my iPhone using Tapatalk

This thing is a must have in the recreational marine world.

 

[dngrmse]

3lb. Fiskars imported all the way from the Amazon.

And a metric socket set from Sears.

 

[ianguilly]

Nice boxes, are they ball bearing slides?

Yes, that was the selling point for me is early for ball bearings slides.

 

[c-hawk19]

sorry for the sorry picture.
slides for mb1100, 3 piece lady's foot pry bar set, new battery charger, battery tester, 3/8 locking extension set

 

[one9gt]

If that doesn't work try this...
Plus they make a relief valve to tie into your line if you do get stuck on a bad fitting. It is a little expensive, but well worth the money. It'll fit in tighter spaces than that one.

I ended up finding the set with coupler, relief valve and release hook for $59 on amazon. Also, ordered the lock n lube quick connect hose adapter so I could have the lock n lube and a normal coupler without having to wrench them in and off. I'll place the univer-co on my pneumatic greaser


Sent from my iPhone using Tapatalk

 

[firworks]

JAWHORSE!

View media item 66044
Seems pretty stout so far. Haven't gotten to do more than screw with it for a few minutes though.

 

[TonyCH]

A wrench

 

[Cope]

Yes, that was the selling point for me is early for ball bearings slides.

Great! I have had the Matco equivalent of that set since 1988.

 

[mattgood65]

Thoughts these would be great in my Road Box, compact seal pullers, yet use with a ratchet, could save some time via limited access. From LTI Tools

 

[mattgood65]

Nice Vise

 

[TonyCH]

Maybe I'll add a size refrence...

Its 85mm, 80cm long and 8.5kgs. That is about 3.3", 2.63ft and 18.8lbs.

 

[Tonellin]

maybe i'll add a size refrence...

its 85mm, 80cm long and 8.5kgs. That is about 3.3", 2.63ft and 18.8lbs.

holy ****

 

[PelicanPines]

Maybe I'll add a size refrence...

Its 85mm, 80cm long and 8.5kgs. That is about 3.3", 2.63ft and 18.8lbs.

For watch repair?... on big ben?

 

[bb_max]

Thoughts these would be great in my Road Box, compact, yet use with a ratchet, could save some time via limited access.

What is that? Link?

 

[mattgood65]

Seal pullers, LTI tools I think

 

[freudianfloyd]

I've been slacking on posting my new tools. Here is the only one I have a picture of at the moment.

Stark USA 8" buffer. Seems to be pretty well built for the price.

[/URL][/IMG]

I also picked up some rouge, buffing wheels, and a stand, which is about a foot too short for my liking. I have been wanting one of these for a while, and finally bit the bullet.

 

[Pipe_guy]

Proto 18 piece 1/2 socket set in 6 point sae. I use proto at work everyday so no real surprises. Just good quality made in the USA tools. I already have the longer ratchet and like it a lot. They have a low tooth count but they are strong as hell. I got this kit for 106 bucks Canadian on Amazon. Pretty good deal I think.