Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
PelicanPines
ALLIANCE MEMBER
The Original Fisho
Well-known member
- Joined
- Dec 30, 2014
- Messages
- 109
jerseykat1
Well-known member
I like that they bite well and don't let go, i don't like that on smaller clamps they don't always compress them enough to EASILY slide the clamp down. i usually have to spray a but of soapy water on the clamps to get them off. However they do work better than regular pliers especially since the jaws can pivot to suit most clamp removal situations.
jerseykat1
Well-known member
Milwaukee 2861 mid torque impact wrench. Can't wait to try this bad boy out.
Sent from my Z958 using Tapatalk
i can't wait for you to tell us how you like it.. It is on my short list.
Attachments
jerseykat1
Well-known member
Thats awesome.. how did you manage to get them for free?
The Original Fisho
Well-known member
- Joined
- Dec 30, 2014
- Messages
- 109
My buddy is an electrician and these were spec'd for a job. The client changed their mind on what fixtures they wanted.
Sent from my SM-G903W using Tapatalk
jerseykat1
Well-known member
66HertzClone
ALLIANCE MEMBER
Nice assortment there. Any chance you could tutor Tyguy1209 on how to post pictures?
PelicanPines
ALLIANCE MEMBER
I have such a bad broadband connection... I couldn't even try to post a "MondoPic"... I would time out.
Here is one I missed:
Attachments
66HertzClone
ALLIANCE MEMBER
I have several pieces from TopTul, I like them all very much, the finish on them is great, easy to wipe off and no fingerprints.
PelicanPines
ALLIANCE MEMBER
I got the 1/4 ratchet there... I want the 3/8" and 1/2" when they become available. That THandle is 3/8" and absolutely wonderful. It will be my SparkPlug go to.
4 FN 27
ALLIANCE MEMBER
pm85
Just thought pictures were pictures. My bad.
Sent from my SAMSUNG-SM-G891A using Tapatalk
jeffmoss26
Well-known member
some small purchases from the last 2 weekends - all the files are US made Nicholson 
Last edited:
snowpro90
Well-known member
some small purchases from the last 2 weekends - all the files are US made Nicholson
https://i.imgur.com/f0qJBiP.jpg
https://i.imgur.com/f0qJBiP.jpg
Where did you pick those up Jeff?
jeffmoss26
Well-known member
two local hardware stores - one mostly buys stuff from other stores that have closed.
Brownsfan
Well-known member
Place called south hills hardware. It's literally 1 minute from my house. I hope he didn't buy them all because I noticed them the day before and was in a hurry. Oh well if he did. At least it went to a local GJ member
jeffmoss26
Well-known member
The first pic came from there (last weekend) and the second pic is from Willowick Hardware, went there today. I only bought the 2 files posted above, I am not a hoarder
isb cornbinder
Well-known member
I have needed and wanted a 1000kg hanging crane scale for some time. I checked the local scale shop first. They wanted $1700cdn. I found the same model on AMAZON for $164cdn. I got free shipping and the scale was delivered in 30 hours.
I found the MADE IN USA engine hoist on Craigslist. It was $100 I delivered it to my shop in 45 minutes.
I found the MADE IN USA engine hoist on Craigslist. It was $100 I delivered it to my shop in 45 minutes.
Attachments
mjoekingz28
Well-known member
Tyguy1209,
It looks like you are set-up for success.
It looks like you are set-up for success.
SuzukiGS750EZ
Well-known member
- Joined
- Apr 26, 2012
- Messages
- 3,273
I saw nothing wrong? You posted how I do.
mjoekingz28
Well-known member
That Cornwell screwdriver kit is remarkable. It has screwheads for fastener shapes I have never seen and probably couldn't ever think up.
PelicanPines
ALLIANCE MEMBER
Nothing wrong with your pictures... On some devices... they don't size well and are huge. When you attach the pictures the way I do... everybody gets the same size attachment and they can click on it to see a larger version.
6 of one half a dozen of the other. Both ways work
6 of one half a dozen of the other. Both ways work
Attachments
shocksandstrutz
Well-known member
Not a tool per se, but will definitely help with using them. I scored 8 of these led fixtures brand new in the box for free. May go back and grab a couple more if needed.
Sent from my SM-G903W using Tapatalk
you ****!!
Attachments
I agree when I saw it on his truck I thought this is the same old kit with screwdriver everyone sells. Then saw some of the bits it came with and how smooth the screwdriver was I had to pick it up.
Sent from my SAMSUNG-SM-G891A using Tapatalk
66HertzClone
ALLIANCE MEMBER
I meant nothing bad, it is just cumbersome to have to scroll left and right a few times to see the photos.
WildwoodChuck
Well-known member
13 pc. SAE ball end hex key set (Bondhus[emoji768] 37937)
15 pc. Metric ball end hex key set (Bondhus[emoji768] 38095)
diagonal cutting (Channellock[emoji768] 337)
tongue and groove (Channellock[emoji768] 430)
slip joint (Channellock[emoji768] 524)
12” adjustable wrench (Crescent[emoji768] AT18)
8” adjustable wrench (Crescent[emoji768] AT112)
31 pc. screw driving bit set (DeWalt[emoji768] DWAX100)
31 pc. security bit set (DeWalt[emoji768] DWAX200)
5" needle nose pliers (GearWrench[emoji768] 82002)
1/2" x 6" x 3/8" cold chisel (GearWrench[emoji768] 82264)
3/8" x 5" center punch (GearWrench[emoji768] 82270)
8" file half round (GearWrench[emoji768] 82824)
telescoping magnetic retrieving tool (GearWrench[emoji768] 84089)
7” curved jaw locking pliers (Irwin[emoji768] 702L3)
5” curved jaw locking pliers (Irwin[emoji768] 902L3)
8” tongue and groove pliers (Irwin[emoji768] 4935095)
6” tongue and groove pliers (Irwin[emoji768] 4935351)
1/2" slotted (Klein[emoji768] 600-12)
crimping/cutting tool (Klein[emoji768] 1005)
long-nose multi-purpose tool (Klein[emoji768] 1010)
600A AC clamp meter (Klein[emoji768] CL200)
long nose pliers (Klein[emoji768] D301-6C)
lineman pliers (Klein[emoji768] D2000-9NETH)
bit tip holder (Milwaukee[emoji768] 48-32-4502)
nut setter (Milwaukee[emoji768] 49-66-4563)
7/16” impact nut driver 6” (Hitachi[emoji768] 115289)
1/2” impact nut driver 6” (Hitachi[emoji768] 115290)
impact socket 5/8" 6 pt. standard SAE socket (Proto[emoji768] 7220h)
8 oz. soft face hammer (Stanley[emoji768] 57-594)
wire stripper (Stanley[emoji768] 84-199)
folding chisel (Stanley[emoji768] FMHT16145)
1/4" x 6" bit holder with retaining ring (Wiha[emoji768] 71437)
32 oz. ball peen hammer (Wilton[emoji768] 33214)
extractor/remover Molex[emoji768] pin
quick-release flexible head ratchet
6" socket extension
1/2" 6 pt. standard SAE socket
5/64” security hex 1/4" x 1” hex bit
7/32” security hex 1/4" x 1” hex bit
1/4” security hex 1/4" x 1” hex bit
right angle attachment (DeWalt[emoji768] DWARA100)
unibit 1/4” to 1-3/4”
unibit 1/4" to 3/4"
10 1/2" snips (Wiss[emoji768] MultiMaster[emoji768] M300)
cordless impact 20v (DeWalt[emoji768] DCF886D2)
cordless grinder 20v (DeWalt[emoji768] DCG412M2)
grinders 6” (Metabo[emoji768] W12-150 Quick)
gyroscopic screwdriver (DeWalt[emoji768] DCF680N2)
Sent from my iPhone using Tapatalk
15 pc. Metric ball end hex key set (Bondhus[emoji768] 38095)
diagonal cutting (Channellock[emoji768] 337)
tongue and groove (Channellock[emoji768] 430)
slip joint (Channellock[emoji768] 524)
12” adjustable wrench (Crescent[emoji768] AT18)
8” adjustable wrench (Crescent[emoji768] AT112)
31 pc. screw driving bit set (DeWalt[emoji768] DWAX100)
31 pc. security bit set (DeWalt[emoji768] DWAX200)
5" needle nose pliers (GearWrench[emoji768] 82002)
1/2" x 6" x 3/8" cold chisel (GearWrench[emoji768] 82264)
3/8" x 5" center punch (GearWrench[emoji768] 82270)
8" file half round (GearWrench[emoji768] 82824)
telescoping magnetic retrieving tool (GearWrench[emoji768] 84089)
7” curved jaw locking pliers (Irwin[emoji768] 702L3)
5” curved jaw locking pliers (Irwin[emoji768] 902L3)
8” tongue and groove pliers (Irwin[emoji768] 4935095)
6” tongue and groove pliers (Irwin[emoji768] 4935351)
1/2" slotted (Klein[emoji768] 600-12)
crimping/cutting tool (Klein[emoji768] 1005)
long-nose multi-purpose tool (Klein[emoji768] 1010)
600A AC clamp meter (Klein[emoji768] CL200)
long nose pliers (Klein[emoji768] D301-6C)
lineman pliers (Klein[emoji768] D2000-9NETH)
bit tip holder (Milwaukee[emoji768] 48-32-4502)
nut setter (Milwaukee[emoji768] 49-66-4563)
7/16” impact nut driver 6” (Hitachi[emoji768] 115289)
1/2” impact nut driver 6” (Hitachi[emoji768] 115290)
impact socket 5/8" 6 pt. standard SAE socket (Proto[emoji768] 7220h)
8 oz. soft face hammer (Stanley[emoji768] 57-594)
wire stripper (Stanley[emoji768] 84-199)
folding chisel (Stanley[emoji768] FMHT16145)
1/4" x 6" bit holder with retaining ring (Wiha[emoji768] 71437)
32 oz. ball peen hammer (Wilton[emoji768] 33214)
extractor/remover Molex[emoji768] pin
quick-release flexible head ratchet
6" socket extension
1/2" 6 pt. standard SAE socket
5/64” security hex 1/4" x 1” hex bit
7/32” security hex 1/4" x 1” hex bit
1/4” security hex 1/4" x 1” hex bit
right angle attachment (DeWalt[emoji768] DWARA100)
unibit 1/4” to 1-3/4”
unibit 1/4" to 3/4"
10 1/2" snips (Wiss[emoji768] MultiMaster[emoji768] M300)
cordless impact 20v (DeWalt[emoji768] DCF886D2)
cordless grinder 20v (DeWalt[emoji768] DCG412M2)
grinders 6” (Metabo[emoji768] W12-150 Quick)
gyroscopic screwdriver (DeWalt[emoji768] DCF680N2)
Sent from my iPhone using Tapatalk
Attachments
maintguy
Well-known member
13 pc. SAE ball end hex key set (Bondhus[emoji768] 37937)
15 pc. Metric ball end hex key set (Bondhus[emoji768] 38095)
diagonal cutting (Channellock[emoji768] 337)
tongue and groove (Channellock[emoji768] 430)
slip joint (Channellock[emoji768] 524)
12” adjustable wrench (Crescent[emoji768] AT18)
8” adjustable wrench (Crescent[emoji768] AT112)
31 pc. screw driving bit set (DeWalt[emoji768] DWAX100)
31 pc. security bit set (DeWalt[emoji768] DWAX200)
5" needle nose pliers (GearWrench[emoji768] 82002)
1/2" x 6" x 3/8" cold chisel (GearWrench[emoji768] 82264)
3/8" x 5" center punch (GearWrench[emoji768] 82270)
8" file half round (GearWrench[emoji768] 82824)
telescoping magnetic retrieving tool (GearWrench[emoji768] 84089)
7” curved jaw locking pliers (Irwin[emoji768] 702L3)
5” curved jaw locking pliers (Irwin[emoji768] 902L3)
8” tongue and groove pliers (Irwin[emoji768] 4935095)
6” tongue and groove pliers (Irwin[emoji768] 4935351)
1/2" slotted (Klein[emoji768] 600-12)
crimping/cutting tool (Klein[emoji768] 1005)
long-nose multi-purpose tool (Klein[emoji768] 1010)
600A AC clamp meter (Klein[emoji768] CL200)
long nose pliers (Klein[emoji768] D301-6C)
lineman pliers (Klein[emoji768] D2000-9NETH)
bit tip holder (Milwaukee[emoji768] 48-32-4502)
nut setter (Milwaukee[emoji768] 49-66-4563)
7/16” impact nut driver 6” (Hitachi[emoji768] 115289)
1/2” impact nut driver 6” (Hitachi[emoji768] 115290)
impact socket 5/8" 6 pt. standard SAE socket (Proto[emoji768] 7220h)
8 oz. soft face hammer (Stanley[emoji768] 57-594)
wire stripper (Stanley[emoji768] 84-199)
folding chisel (Stanley[emoji768] FMHT16145)
1/4" x 6" bit holder with retaining ring (Wiha[emoji768] 71437)
32 oz. ball peen hammer (Wilton[emoji768] 33214)
extractor/remover Molex[emoji768] pin
quick-release flexible head ratchet
6" socket extension
1/2" 6 pt. standard SAE socket
5/64” security hex 1/4" x 1” hex bit
7/32” security hex 1/4" x 1” hex bit
1/4” security hex 1/4" x 1” hex bit
right angle attachment (DeWalt[emoji768] DWARA100)
unibit 1/4” to 1-3/4”
unibit 1/4" to 3/4"
10 1/2" snips (Wiss[emoji768] MultiMaster[emoji768] M300)
cordless impact 20v (DeWalt[emoji768] DCF886D2)
cordless grinder 20v (DeWalt[emoji768] DCG412M2)
grinders 6” (Metabo[emoji768] W12-150 Quick)
gyroscopic screwdriver (DeWalt[emoji768] DCF680N2)
Sent from my iPhone using Tapatalk
Hey buddy. Check your Klein clamp for recall. I know some are now on recall. Like the cl110, cl210, cl310, etc
Nice new additions. Any reason why? Or just love tools?
WildwoodChuck
Well-known member
I changed jobs 14 months ago the company buys all my tools and instead of just buying **** I spent a year working with my stuff and picked what I really wanted. In December I had the company order all new tools the last of them finally came in so I figured I would share a picture.
Jarhead0408
Well-known member
That's a killer hoist man. Ruger's are the bomb.
maintguy
Well-known member
What kind of work you do?
Picked up 8 of these cabinets
46"x27"x24" welded steel center shelf is removable, adjustable threaded feet, keys in pouch inside door made in the usa
Def don't need 8.......
I could get a couple of them out of your way, if that'll help.
CrazySanMan
Member
- Joined
- Jan 20, 2017
- Messages
- 16
