ChargerRT
Well-known member
Has anyone seen any garage door openers clearanced out? Mine just took a dump on me and really don't want to shell out 200 bucks for a new decent one.
2017 HD deals/sales/clearance thread
- Thread starter cheechi
- Start date
EOC_Jason
Well-known member
I think there was a sku changeover around christmas. Do some searching on this thread or possibly the 2016... Maybe you will get lucky and find one stuffed in the back...
Cruzan80
Well-known member
Husky 3/8 Butterfly Impacts 10.03 1001-252-660
Husky 1/4 Air Ratchets 15.03
1001-238-322
Ridgid 8gal Gas Compressor 225.03 1001-252-078
Sent from my Moto G (5) Plus using Tapatalk
Husky 1/4 Air Ratchets 15.03
1001-238-322
Ridgid 8gal Gas Compressor 225.03 1001-252-078
Sent from my Moto G (5) Plus using Tapatalk
drwheels
Well-known member
Dewalt mc nails at 03 pricing. Two Milwaukee deals at hd deal of the day.
tonyciambrone
Well-known member
You should be able to use any "pegboard kit" type hangers and attachments. A lot of times they are over by the Garage Wall/ Shelving/ Cabinets sections of a hardware store. Harbor Freight has them, I know Menard's and Lowe's do too. Personally, I Use Harbor Freight Cheap Bolt assortments for a lot of my "pegs". Just throw a bolt through with two washers and a nut, can hang a lot of holders or attach brackets of your own design and liking.
Well I got some from HF, but they are too loose, if I try to bend the they break.....
Sent from my iPhone using Tapatalk
a52-830
Well-known member
is the reason they are loose that the back board is metal?
i have run into this. all the peg board hangers i have found are meant for (is it masonite?) board that they are made of, not thin metal.
Yes a52-830, very frustrating, I have escalated to Milwaukee territory manager, in the meantime I am going to get some that are for 1/8 or 1/4 pegboard and see if they work. The magnets won’t hold everything for me i.e.: paintbrushes, etc.
Sent from my iPhone using Tapatalk
tonyciambrone
Well-known member
If you want to alter the hooks you need to clamp them in your vice and carefull hammer the portion that hooks into the board close to 90 Degrees. If you try to bend it using the portion that sticks out, the weld or tack will bust off 100% of the time.
Other suggestions include getting a piece of cheap pegboard masonite and mounting it behind the metal pegboard. again, couple of fender washers and cheap bolts would probably do it.
Did you really think Milwaukee was going to send you a pegboard with 1/4 steel, or even 1/8?...
Other suggestions include getting a piece of cheap pegboard masonite and mounting it behind the metal pegboard. again, couple of fender washers and cheap bolts would probably do it.
Did you really think Milwaukee was going to send you a pegboard with 1/4 steel, or even 1/8?...
justthefastest
Active member
- Joined
- Mar 10, 2016
- Messages
- 26
Still shows $25.00 when searching "milwaukee" at the ~15 stores I frequent. Double check the SKU you're entering or search milwaukee and filter by clearance.
Whiskey Tango Foxtrot
Well-known member
cell_phone
Well-known member
- Joined
- Jan 25, 2017
- Messages
- 75
a local HD had three husky air tools on clearance (i know the ratchet was previously mentioned) but they were all sold out. however, they did have the displays.
1) 1/4" air ratchet for ~$15
2) 3/8" butterfly impact for i don't remember how much
3) side mounted cutoff wheel ~$20 down from $80 (#1001-238-369)
i already have a 1/4" drive ratchet (and i love it). and i don't think i have any use for a butterfly impact. in all honesty, i don't even know their intended use over a standard shape impact. so i don't think i need one.
i've never seen these before but i know my regular cutoff wheel has, at times, been difficult to use due to the angle. so i asked for help and got the display. i asked if they guy would take off a little extra for being a floor model and he agreed but we didn't negotiate the discount. when i got to the register, i thought i heard him tell the cashier to take off 30%. when it rang up, he took off 40%. so in the end i paid $13 out the door.
1) 1/4" air ratchet for ~$15
2) 3/8" butterfly impact for i don't remember how much
3) side mounted cutoff wheel ~$20 down from $80 (#1001-238-369)
i already have a 1/4" drive ratchet (and i love it). and i don't think i have any use for a butterfly impact. in all honesty, i don't even know their intended use over a standard shape impact. so i don't think i need one.
i've never seen these before but i know my regular cutoff wheel has, at times, been difficult to use due to the angle. so i asked for help and got the display. i asked if they guy would take off a little extra for being a floor model and he agreed but we didn't negotiate the discount. when i got to the register, i thought i heard him tell the cashier to take off 30%. when it rang up, he took off 40%. so in the end i paid $13 out the door.
Attachments
Last edited:
fourjeepin
Well-known member
Have heard this reported here before but HD didn't program it to do this. If/when they decide to block penny sales, it won't freeze. It will cause an intervention which alerts the cashier. They might tell you the customer some kind of coded message and clear text at the cashier station, but they won't code it to freeze. It takes over five minutes for one of those dinosaurs to reboot.
a local HD had three husky air tools on clearance (i know the ratchet was previously mentioned) but they were all sold out. however, they did have the displays.
1) 1/4" air ratchet for ~$15
2) 3/8" butterfly impact for i don't remember how much
3) side mounted cutoff wheel ~$20 down from $80 (#1001-238-369)
i already have a 1/4" drive ratchet (and i love it). and i don't think i have any use for a butterfly impact. in all honesty, i don't even know their intended use over a standard shape impact. so i don't think i need one.
i've never seen these before but i know my regular cutoff wheel has, at times, been difficult to use due to the angle. so i asked for help and got the display. i asked if they guy would take off a little extra for being a floor model and he agreed but we didn't negotiate the discount. when i got to the register, i thought i heard him tell the cashier to take off 30%. when it rang up, he took off 40%. so in the end i paid $13 out the door.
Got 2 cutoff wheels and a butterfly myself today. 20 for the cutoffs and the butterfly's are 10. Lots of butterfly's in stock around me,I guess they aren't that popular but I used them all the time back in the day.
Apparently when I scanned the item, the self checkout says the item can not be sold and it freezes. I wonder if the item was ever input in their system since there were many of them. I once tried to buy a new item and apparently they never input the item and price in their system.
Ole Slewfoot
Well-known member
Nothing compared to the 25 it takes them to fix it when the dumb thing eats your dollar.
Mctiger1985
Well-known member
host photos free
Yes, I manged to find the one outside with the $299 clearance sticker. Has a small dent and dirty, but otherwise good condition
KaHuNaZ
Well-known member
host photos free
Yes, I manged to find the one outside with the $299 clearance sticker. Has a small dent and dirty, but otherwise good condition
killer deal
Glacier Bay Premium Reverse Osmosis Filter System on clearance. Mounts under sink, has its own small faucet. Now 37.03, upc 819561010089
6 Month replacement filter for same. Now 9.53, upc 819656101096
2 Year replacement membrane filter, now 13.30, upc 819561101102
6 Month replacement filter for same. Now 9.53, upc 819656101096
2 Year replacement membrane filter, now 13.30, upc 819561101102
2manytools
Well-known member
Clearance cart. Also a bunch of trimmer attachments and the likes for $1. Nothing really worth while unless you needed it.
Sent from my iPhone using Tapatalk
I got that chainsaw for about that price at Sears a couple years back. Sears then got the chainsaw back within their return policy.
jits1980
Well-known member
Found 1
Sent from my SM-G920P using Tapatalk
Sent from my SM-G920P using Tapatalk
jits1980
Well-known member
These have shown 179 in my area for about 6 months now..
Guys I'm sorry if I'm wrong but I saw this on clearance rack so I checked the checker and I'm pretty sure it came up as $125. Passed because i didn't realize how much they were originally:
Sent from my iPhone using Tapatalk
Sent from my SM-G920P using Tapatalk
drwheels
Well-known member
saw that today. Not many left around.That is what they are worth. some of the others are at 06 pricing. Found one this am.Found 1
Sent from my SM-G920P using Tapatalk
Last edited:
Malaworkerbee
Well-known member
Well I just saw something interesting here in Vegas.
My store had 6 in stock two days ago. I noticed that they pulled the sticker price off the shelf. Today all they're all gone from the overhead shelves and all stores show no stock.
In the past I've heard HD employes arguing about a clearance item (tile cutter) but I didn't pay much attention. Something doesn't smell right here. THEY PULLED THE PRODUCT OFF THE SHELF IN ORDER TO NOT SELL IT ON CLEARANCE.
zeekh
Well-known member
Same thing here. Rarely if ever find anything discounted past 50%
fourjeepin
Well-known member
You need to find out where this product goes. In this area, most of it goes to a guy that sells the overstocks, some clearance items, and returns which can't be resold (toilets, plumbing, electrical, and some tools). His starting price is 50% of retail. When I first found him 5 years ago, he couldn't check retail and practically gave stuff away. Price pfister bath faucets for $20. Unused American Standard toilets for $25.
drwheels
Well-known member
3901 had flooded from sprinkler on sat. They hit it with forklift. You might find some deals on wet stuff.
They are in a few stores around here but they have terrible reviews on hd.com.
Around me I see the guy on craigslist asking almost full retail. I like to **** with him offering the price he got them at.
Bzrollin
Well-known member
Haven't been paying much attention to this thread lately, so excuse me if they've been posted. These suckers are back down
