3 legged stand

[royce]

Cut these out of a blind flange

Royce

 

[Balor]

I like it royce. rngr1

 

[rk_tek]

Jealous of all the cool materials you find to repurpose

 

[larry_g]

So, do you have the round that was cut out of the center to make the flange to use for the table top? That is going to be one heavy table.

lg
no neat sig line

 

[royce]

Thanks Balor

RK, it takes some effort to find all this ****, but well worth it to me.

Larry, yes,but it is slated for a different stand.
If my living room had concrete floor, I would make a table from it.
I don't really know what this will be, when it is done.

Royce

 

[RivennHewn]

Thanks Balor

I don't really know what this will be, when it is done.

Royce

Sit and have a beer or two with it, and it will tell you what it wants to be.

Looks awesome!

 

[Thumper68]

Very cool.

 

[royce]

Thanks Riven and Thumper
Got some feet and a attachment plate cut today.

Royce

 

[yaidunno]

How much torch time was needed to cut through that much steel? That's a lot of material!

 

[royce]

How much torch time was needed to cut through that much steel? That's a lot of material!

The 3" material about 10" per minute and the 3/4" about 20" per minute.

Royce

 

[steel 35]

Pictures of the torch please!

 

[LXCam]

You're local welding supply joint must luuuvvvv you.


Another crazy cool project bud, very impressive!!

 

[ilovevocs]

That's respectable torch work.

 

[jhn9840]

Crazy good skill with a torch. Looks smooth as a babies behind. Thanks for sharing.

jhn9840
John

 

[Strouty]

Pictures of the torch please!

Most torches are designed to cut up to about 8" thick with the correct tip.

 

[Richard Cranium]

looks great.

 

[2oolhound]

Great vision to make legs from it. Looks amazing!

 

[fnieto]

CNC flame cut. Was it a blank flange prior to try-cutting?
Gonna look cool as hell.

 

[royce]

Pictures of the torch please!

I don't have a pic, but it is just a standard victor track torch with a #5 tip

Royce

 

[royce]

Thanks LXC

Ilovevocs and Jhn9840, I had help with a track torch.

Thanks Richard, 2oolhound, and all.

Royce

 

[royce]

CNC flame cut. Was it a blank flange prior to try-cutting?
Gonna look cool as hell.

Fnieto,
No CNC, just a track torch set up on a pivot.
Yes, it was a blind flange, hear is a pic of the center.
Thanks

Royce

 

[Strouty]

Is the center going to be the top?

 

[royce]

Is the center going to be the top?

No, I'm thinking about a real kooky stand that will use it for a base.

Royce

 

[steel 35]

I don't have a pic, but it is just a standard victor track torch with a #5 tip

Royce

Thanks, I was pretty sure it wasn't a ********! Never seen a track that turns

 

[royce]

I tried using the last quarter of the flange as the column.
I turned it both ways to see if it looks good.
Not sure if the look is right to my eye or not.
May need to use a different column.

Royce

 

[Strouty]

Two more of those and reverse the lower pattern, that would make a serious table.

 

[gahrajmahal]

Not feeling the curved top. I think a boring three bar Eifel tower type then a pallet wood top with angle iron surround.

 

[royce]

Two more of those and reverse the lower pattern, that would make a serious table.

It sure would Strouty
I'm thinking at this point, I would like to not add that much weight to it.
Thanks

Royce

 

[royce]

Not feeling the curved top. I think a boring three bar Eifel tower type then a pallet wood top with angle iron surround.

Me either Gahrajmahal,
I like the Eifel concept.
I'll see if I can come up with some 3" channel and perforate it similar to the legs.
Thanks

Royce

 

[larry_g]

Just thinking out loud here. The arcs are all 1/4 of a circle correct? How does it look if you align the top arc with a lower one so it looks like a continuous 1/2 circle then have the top offset to be over the lower/mid plate. OR align the upper arc with a lower to make an S.

lg
no neat sig line

 

[alwaysFlOoReD]

I tried using the last quarter of the flange as the column.
I turned it both ways to see if it looks good.
Not sure if the look is right to my eye or not.
May need to use a different column.

Royce

Looks like a sculpture from the movie "Beetlejuice".
https://en.wikipedia.org/wiki/Beetlejuice
I like it.

 

[royce]

Just thinking out loud here. The arcs are all 1/4 of a circle correct? How does it look if you align the top arc with a lower one so it looks like a continuous 1/2 circle then have the top offset to be over the lower/mid plate. OR align the upper arc with a lower to make an S.

lg
no neat sig line

Yes, 1/4 sections
I pondered those ideas when I laid it out, but found with a 27" diameter it was to short.
Thanks

Royce

 

[royce]

Looks like a sculpture from the movie "Beetlejuice".
https://en.wikipedia.org/wiki/Beetlejuice
I like it.

Great movie
Thanks

Royce

 

[alwaysFlOoReD]

Put the last quarter on a swivel and use it as a seat? Swivel wheels on the legs.

 

[royce]

Got this project as far as I can go until I decide what to use it for.
In the process of welding out, I had it downside up and it looked like it would make a fine round glass top bar table.
Here is a few pics

Royce

 

[NUTTSGT]

More awesome work.


Not to ask a stupid question and I'm sure others know, but is this hobby work or part of what you do for a living ?

 

[royce]

More awesome work.


Not to ask a stupid question and I'm sure others know, but is this hobby work or part of what you do for a living ?

Thanks,
All for fun

Royce