Who Needs What?

[twertsy]

You did not mention taps and dies but I'm looking for a few stamped with USS and SAE to complete a set.

I am looking for early Sears sockets to complete a mixed set that I have. I have an extra Plumb style ratchet 1/2inch male square if anyone needs one.

Sent from my SM-J320V using Tapatalk

I have quite a few Ed, what brand(s)?

Sent from my Pixel 2 XL using Tapatalk

 

[Galaxie-Ed]

Greenfield. They have the GTD stamping.

I have quite a few Ed, what brand(s)?

Sent from my Pixel 2 XL using Tapatalk

Sent from my SM-J320V using Tapatalk

 

[Galaxie-Ed]

Next on my to-do is my first car, bought in 1982. A 1967 Firebird.

Sent from my Pixel 2 XL using Tapatalk

Nice cars. I love the lines of 60's cars.

Sent from my SM-J320V using Tapatalk

 

[Galaxie-Ed]

Next on my to-do is my first car, bought in 1982. A 1967 Firebird.

Sent from my Pixel 2 XL using Tapatalk

While we are on the topic, need any spreadbore carbs?

Sent from my SM-J320V using Tapatalk

 

[bonneyman]

Next on my to-do is my first car, bought in 1982. A 1967 Firebird.

Sent from my Pixel 2 XL using Tapatalk

My mom at one time had a 68 Camaro, painted in 66 Corvette yellow and black vinyl top. I think the body style was similar to your Firebird.
327 V-8 made it a real mover!

 

[Toothaker]

Todd, I'm also looking for Plomb / Proto Los Angeles pebble flare wrenches, these are the single ended wrenches in the 37XX series. I have the 3712 3/8" and 3728 7/8". Do you have any in that series available?

Thanks much!

 

[twertsy]

Todd, I'm also looking for Plomb / Proto Los Angeles pebble flare wrenches, these are the single ended wrenches in the 37XX series. I have the 3712 3/8" and 3728 7/8". Do you have any in that series available?

Thanks much!

I don't have any extras of those. In fact, I need a couple I believe.

Sent from my Pixel 2 XL using Tapatalk

 

[Toothaker]

I don't have any extras of those. In fact, I need a couple I believe.

Sent from my Pixel 2 XL using Tapatalk

The two I have came in an eBay lot of SK / SK Wayne and Lectrolite wrenches. For some reason, this particular auction consisted of no overlaps of my existing wrenches. So I snapped them up and probably paid too much doing so. I didn't give any attention to the flare wrenches until I had them in my hands. They are beautiful - if a man can call tools beautiful, that is. I've been on the hunt for more ever since.

 

[twertsy]

The two I have came in an eBay lot of SK / SK Wayne and Lectrolite wrenches. For some reason, this particular auction consisted of no overlaps of my existing wrenches. So I snapped them up and probably paid too much doing so. I didn't give any attention to the flare wrenches until I had them in my hands. They are beautiful - if a man can call tools beautiful, that is. [emoji38]_hitti I've been on the hunt for more ever since.

Most tools from '30-'50 are beautiful, at least to me.

Sent from my Pixel 2 XL using Tapatalk

 

[txlonghorn1989]

Most tools from '30-'50 are beautiful, at least to me.

Sent from my Pixel 2 XL using Tapatalk

That applies to a lot of the machines as well from that period and earlier. IMO.

 

[Lookin4'67Galaxieconv]

Also Thorsen combo wrenches 9/16 (54018) and 13/16 (54026)

 

[Miss the Pontiacs]

Incidentally, here is a link to the engine being Dyno'd.

https://photos.app.goo.gl/pGyckLuRpzNjUBdD8

And a pic attached.

Okay you talked me into it. I’ll take the engine.
Managed to check out your videosyou have more tools than all my neighbours and me put together.
I like the 455 box that has a whole other vibe to it.
Keep us posted on the GTO, especially when you mount your engine. What are you doing with the stock engine?

 

[twertsy]

Okay you talked me into it. I’ll take the engine. [emoji38]_hitti
Managed to check out your videosyou have more tools than all my neighbours and me put together.
I like the 455 box that has a whole other vibe to it.
Keep us posted on the GTO, especially when you mount your engine. What are you doing with the stock engine?

Thank you. It didn't have an engine when I found it.

The box however held many treasures, including stacks of "GTO," "SD-455," and "RAM AIR IV" vintage decals, still in their GM envelopes.

Sent from my Pixel 2 XL using Tapatalk

 

[txlonghorn1989]

Todd,
Did you get my PM?

Mike

 

[twertsy]

Todd,
Did you get my PM?

Mike

All, I will package and send later this week, then get back to you via PM on shipping.

Mike et al, I realize TA is down, it's being worked.

Sent from my Pixel 2 XL using Tapatalk

 

[misterbill]

Todd,

Next time you're in the S-K section could you check to see if you have any plain steel 3/8" wartime extras? Specifically, a 45150 tommy bar (usually unmarked), 45110 socket (5/16), 45116 socket (1/2), and 45118 socket (9/16). They would be plain steel or phosphate coated like these.

Thanks,

Bill

 

[txlonghorn1989]

All, I will package and send later this week, then get back to you via PM on shipping.

Mike et al, I realize TA is down, it's being worked.

Sent from my Pixel 2 XL using Tapatalk

No problem. Thanks for the heads up!

 

[shanny19]

I don't have any extras of those. In fact, I need a couple I believe.

Sent from my Pixel 2 XL using Tapatalk

I have three or four dupes, what are you missing? (Proto pebble flares.)

My gaps are big logging town tools by and large, if you have spares i’d pay postage and then some, and of course check out your want list. Needing:

Snap On TWM25 socket 25 mm 1/2 drive
Any brand, 3/4 or 1” drive sockets: 1 9/16, 1 15/16, 2 1/8
Any brand, 8 pt sockets: 7/8, 1
Proto DBE: 7/8 x 15/16, 1 3/8 x 1 1/4
Any brand, engineers wrench SOE: 1 3/16, 1 3/8, 1 9/16, 1 15/16, 1 3/4, 1 11/16

Thanks for looking, very much.

 

[1320]

Any Easco 1/2" drive deep 12 point 3/8", 7/16", 1-3/16", or 1-1/4"?

I have some older Proto 1/2" drive deep 12 point sockets, if you're still looking for any.

I think these are the part numbers of the Easco sockets I am looking for, if it helps -

3/8" 53 3212
7/16" 53 3214
1-3/16" 53 3238
1-1/4" 53 3240

Thanks for looking if you have a chance

 

[tym]

I have three or four dupes, what are you missing? (Proto pebble flares.)

My gaps are big logging town tools by and large, if you have spares i’d pay postage and then some, and of course check out your want list. Needing:

Snap On TWM25 socket 25 mm 1/2 drive
Any brand, 3/4 or 1” drive sockets: 1 9/16, 1 15/16, 2 1/8
Any brand, 8 pt sockets: 7/8, 1
Proto DBE: 7/8 x 15/16, 1 3/8 x 1 1/4
Any brand, engineers wrench SOE: 1 3/16, 1 3/8, 1 9/16, 1 15/16, 1 3/4, 1 11/16

Thanks for looking, very much.

Would this suit your needs?

 

[twertsy]

Also Thorsen combo wrenches 9/16 (54018) and 13/16 (54026)

I have a few of those, what style are you looking for?

 

[twertsy]

Todd,

Next time you're in the S-K section could you check to see if you have any plain steel 3/8" wartime extras? Specifically, a 45150 tommy bar (usually unmarked), 45110 socket (5/16), 45116 socket (1/2), and 45118 socket (9/16). They would be plain steel or phosphate coated like these.

Thanks,

Bill

Sorry Bill, no joy on those.

 

[twertsy]

I have three or four dupes, what are you missing? (Proto pebble flares.)

My gaps are big logging town tools by and large, if you have spares i’d pay postage and then some, and of course check out your want list. Needing:

Snap On TWM25 socket 25 mm 1/2 drive
Any brand, 3/4 or 1” drive sockets: 1 9/16, 1 15/16, 2 1/8
Any brand, 8 pt sockets: 7/8, 1
Proto DBE: 7/8 x 15/16, 1 3/8 x 1 1/4
Any brand, engineers wrench SOE: 1 3/16, 1 3/8, 1 9/16, 1 15/16, 1 3/4, 1 11/16

Thanks for looking, very much.

I don't have any of those extra Shanny, sorry.

 

[twertsy]

I think these are the part numbers of the Easco sockets I am looking for, if it helps -

3/8" 53 3212
7/16" 53 3214
1-3/16" 53 3238
1-1/4" 53 3240

Thanks for looking if you have a chance

I only have a 15/16 socket in 1/2" deep. Have lots of 3/8" drive.

 

[1320]

I only have a 15/16 socket in 1/2" deep. Have lots of 3/8" drive.

Thanks for looking!

 

[shanny19]

I don't have any of those extra Shanny, sorry.

Nobody outside of a mine or logging camp does, haha. Thx for looking!

 

[twertsy]

All,
This morning I packaged up all of those from whom I've received a PM. I'll reply to your PMs with the cost later.

I still need PMs from a bunch of people with addresses.

Todd

 

[tym]

Nobody outside of a mine or logging camp does, haha. Thx for looking!

I do have a 1-3/8 SOE.

 

[gpw_42]

Do you have a Husky knurled 1-1/16" 1/2" drive socket, H2847?

How about Plvmb 1/2" dr (MADE USA):
5422 Socket, 12-Point, 11/16” Opening
5343 Deep Socket, 12-point, 5/8” Opening
5345 Deep Socket, 12-point, 3/4” Opening
5347 Deep Socket, 12-point, 13/16” Opening
5348 Deep Socket, 12-point, 7/8” Opening
5440 Socket, 12-Point, 1-1/4” Opening
5470 Universal Joint

Thanks! Wish I had some trading material....

 

[twertsy]

Do you have a Husky knurled 1-1/16" 1/2" drive socket, H2847?

How about Plvmb 1/2" dr (MADE USA):
5422 Socket, 12-Point, 11/16” Opening
5343 Deep Socket, 12-point, 5/8” Opening
5345 Deep Socket, 12-point, 3/4” Opening
5347 Deep Socket, 12-point, 13/16” Opening
5348 Deep Socket, 12-point, 7/8” Opening
5440 Socket, 12-Point, 1-1/4” Opening
5470 Universal Joint

Thanks! Wish I had some trading material....

I have the Husky and 5422. I have one set of deeps with zero extras.

 

[r_olson_06]

I am looking for a 1/2" drive Blackhawk QD era spinning tee if you have an extra perfer the crimp on grip. Thanks.

Sent from my XT1080 using The Garage Journal mobile app

 

[woody 73]

Twertsy thank you so much for all your help, as it turns out another nice GJ member is sending me the lost wrench.

Thank you again for your very kind offer.

Woody

 

[tym]

Still looking for some user condition Plomb Pebble combos as in my signature. Also have a spare I can offer in partial trade.

 

[Rileysan]

Hi Twertsy. I have a request, should you have the time. I am looking for all sizes of s-k knurled 1/2" drive 8-pt sockets. Thanks for checking!

Brian

 

[BFBOB]

Twertsy,
No Firestone wrenches here, but would you be interested in a Firestone tape measure?

I'm looking for a Westcraft flat wrench (DOE preferred, but combo and DBE ok) in the V-groove pattern, like the Snap-on VS series. Also any wrench in that pattern EXCEPT Action, Thorsen, KAL, Dayton, Channellock, Powr-Kraft, Snap-On or Blue Grass. I already have at least one example in these eight brands.

 

[Galaxie-Ed]

H

Sent from my SM-J320V using Tapatalk

 

[gpw_42]

I have the Husky and 5422. I have one set of deeps with zero extras.

PM sent.

 

[Jim C.]

I’m looking for a Craftsman DBE 10mm x 11mm wrench with the pointed letter “A” in the word CR”A”FTSM”A”N.

Jim C.

 

[Toothaker]

Todd, thank you so much for the SK DBE wrenches!

 

[Musicinabottle]

Todd, I got the socket in the mail without warning and it's stunning. Thank you so very much. I'll be catching up with you soon.........