To avoid these ads, REGISTER NOW!

KNIPEX Ear Clamp Pliers $13.99

To avoid these ads, REGISTER NOW!
2

2manytools

Well-known member
Joined
Feb 2, 2016
Messages
4,335
Location
Mt Pleasant, MI
It's a good deal, of you need them. These are not for cutting, but rather for tightening band clamps, such as found in irrigation lines. It has a more blunt esge, where as end nippers have one for cutting.
 
R

rlitman

Well-known member
Joined
Oct 18, 2010
Messages
24,603
Location
Long Island
2manytools said:
...These are not for cutting, but rather for tightening band clamps, such as found in irrigation lines. It has a more blunt esge, where as end nippers have one for cutting.
Click to expand...

I have the set which have both end and side jaws.
oetiker1099_600.gif


While the side jaws actually do not meet, I can assure you that the end jaws are sufficiently sharp to cut the ear off of an Oetiker clamp if you use have the jaws cut the strap end on. I use it all the time to un-do these clamps.
 
OP
A

andre_22

Well-known member
Joined
Nov 9, 2018
Messages
50
Location
Florida
rlitman said:
I have the set which have both end and side jaws.
oetiker1099_600.gif


While the side jaws actually do not meet, I can assure you that the end jaws are sufficiently sharp to cut the ear off of an Oetiker clamp if you use have the jaws cut the strap end on. I use it all the time to un-do these clamps.
Click to expand...
can you use it for crimping? I read some reviews on Amazon and some people said it was difficult to crimp
 
R

rlitman

Well-known member
Joined
Oct 18, 2010
Messages
24,603
Location
Long Island
andre_22 said:
can you use it for crimping? I read some reviews on Amazon and some people said it was difficult to crimp
Click to expand...

It's ok for 1/2" PEX cinch clamps, though perhaps a little difficult if you have weak hands. It's the best tool out there for anything smaller.

Once you get to the 3/4" clamps, it is a struggle to close them with this. I can use it, but my hands are worn out by the second clamp. And I'm not even sure if it's possible to use this to close 1" clamps.

If you're closing a lot of larger stepless Oetiker rings, then a compound leverage tool is your friend. If you're using this on automotive rings, or on irrigation (double ear rings require less force, but aren't strong enough for PEX line pressure), then it's great.
 
2

2manytools

Well-known member
Joined
Feb 2, 2016
Messages
4,335
Location
Mt Pleasant, MI
rlitman said:
I have the set which have both end and side jaws.
oetiker1099_600.gif


While the side jaws actually do not meet, I can assure you that the end jaws are sufficiently sharp to cut the ear off of an Oetiker clamp if you use have the jaws cut the strap end on. I use it all the time to un-do these clamps.
Click to expand...

This Knipex video says they aren't supposed to, but I'm sure with enough force anything is possible. Compared to pliers that are meant for cutting, these should be more difficult to do it with. They are Knipex, so I guess I'm not that surprised
 
R

rlitman

Well-known member
Joined
Oct 18, 2010
Messages
24,603
Location
Long Island
2manytools said:
This Knipex video says they aren't supposed to, but I'm sure with enough force anything is possible. Compared to pliers that are meant for cutting, these should be more difficult to do it with. They are Knipex, so I guess I'm not that surprised
Click to expand...

I think my comment wasn't all that clear. It won't damage the ear if used in the proper orientation where the jaw engages the flat surface of the metal (the way it is pinching in the video). But if you turn it so it bites in edge-on, it can cut the ear apart. I don't actually cut the ear off, because that's cutting two layers of metal. Just cut it open, and the clamp splits for easy removal.
 
W

winlinmac

Well-known member
Joined
Aug 17, 2015
Messages
3,757
Location
USA
Oh damn, this is a good deal, I bought mine for more than double the price when I needed it for Tie Rod boot ear clamps
 
T

tarbellb

Well-known member
Joined
Apr 17, 2011
Messages
5,757
Location
Oregon
Ha, so many SlickDeal losers are going to be wondering why their TOOL THING doesnt cut well.... then give Knipex bad reviews. SDITW.
 
To avoid these ads, REGISTER NOW!
W

winlinmac

Well-known member
Joined
Aug 17, 2015
Messages
3,757
Location
USA
To hell with Slickdealers, they know nothing about what they're buying, full of consumerist mindsets---heck they probably don't even work around their own property and thus always hiring contractors

tarbellb said:
Ha, so many SlickDeal losers are going to be wondering why their TOOL THING doesnt cut well.... then give Knipex bad reviews. SDITW.
Click to expand...
 
C

cooliorz

Well-known member
Joined
Sep 3, 2009
Messages
47
Location
Portland, Oregon
I ordered my pliers right when the deal came out but was notified that there was a delay.
I just checked and they canceled the order. I don’t mind though, because I just found the side crimp version on Amazon for $20
 
O

On-Wheel

Well-known member
Joined
Oct 6, 2014
Messages
487
$20 is good deal.The side crimp saved me twice on install. A few times on removal.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom