To avoid these ads, REGISTER NOW!

Found a deal on craigslist? - List Here!

To avoid these ads, REGISTER NOW!
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
Krang said:
5 - gladiator cabinets, 1 - 5 drawer craftsman toolbox, 1 - red toolbox

Got down to $450 for everything... the gladiators will be the base of a 14’ long workbench, red ones going to be a side-car on the welding table, Black one will be stacked with another 5 - drawer I have.






I feel like this is a steal, for my purposes anyway... 14’ of workbench is a lot.
Click to expand...
Good Good :thumbup::thumbup:
Not the "Thread Police" here, :beer:But A better thread to show what you scored is

https://www.garagejournal.com/forum/showthread.php?t=379498
This Thread is More for like, Well,

lets say you "Found a deal on craigslist?"
But, it's not a good time for you, No Money, No Room, No way to haul it, don't need it. Etc.
So you list it here, so someone else may get it!:beer: :beer:
Thanks Good Score............BTY
 
K

Krang

Well-known member
Joined
Oct 22, 2018
Messages
185
Location
Hawaii
bubinga said:
Good Good :thumbup::thumbup:
Not the "Thread Police" here, :beer:But A better thread to show what you scored is

https://www.garagejournal.com/forum/showthread.php?t=379498
This Thread is More for like, Well,

lets say you "Found a deal on craigslist?"
But, it's not a good time for you, No Money, No Room, No way to haul it, don't need it. Etc.
So you list it here, so someone else may get it!:beer: :beer:
Thanks Good Score............BTY
Click to expand...



That’s good info, thanks! I might have just been excited about the score and really wanted to share.
 
S

Shiftless

Well-known member
Joined
Mar 9, 2014
Messages
14,544
Location
East Bay SFO
macgee said:
It’s now been sold but a photo and price in posting is really helpful
Click to expand...

I agree.
I recall it was $300 but I didn’t save a pic
It had a 3 horse 3 phase motor, and a power feed. The seller said it weighed approximately 2200 pounds. Yes...no typo...two thousand two hundred pounds.
 
A

a52-830

Well-known member
Joined
May 28, 2016
Messages
4,644
Location
north of boston, massachusetts
454ragtop said:
Sorry guys, but it's really a moot point now isn't it? Anyway, I'm pretty sure it was like this one https://www.ebay.com/itm/Cincinnati...c:g:IY8AAOSw8-FacMo7:rk:2:pf:1&frcectupt=true
Click to expand...


what they mean is that when posting a deal like this, if you include the asking price in the comments, and an image of the ad (ideally on this server, so it doesnt go away in a year or two) it is helpful to people who come along later to see what was offered at what price. . . . . . .
 
T

thirdmouse

Well-known member
Joined
Dec 26, 2009
Messages
54
Location
Hoagland, IN
I picked this up within the past month. Pretty hard to find a better price on one of these than this. It's in beautiful shape.
 

Attachments

  • ironman-230.jpg
    ironman-230.jpg
    67.7 KB · Views: 79
O

Ole Slewfoot

Well-known member
Joined
Feb 22, 2016
Messages
5,098
Location
Freedom, CA
Auburn CA, $25 Columbian 6" USA vise
Not the best, but a lot of vice for the $

https://sacramento.craigslist.org/tls/d/columbia-6-vise/6756752060.html

00r0r_19HafXp3rHn_1200x900.jpg
 
B

bargainhuntingking

Well-known member
Joined
Nov 22, 2013
Messages
434
Location
The Amazing Pacific Northwest

Attachments

  • 1c856db862e77c3fc2e650b058662ca7.jpg
    1c856db862e77c3fc2e650b058662ca7.jpg
    480.7 KB · Views: 0
  • d9fe08b26c2555900a81ca4bd3fad7c5.jpg
    d9fe08b26c2555900a81ca4bd3fad7c5.jpg
    465.1 KB · Views: 0
  • 7d141c3e39684442a0403f2f240f3ce0.jpg
    7d141c3e39684442a0403f2f240f3ce0.jpg
    384.9 KB · Views: 0
  • 9115d8e1c2525d8a83e41faaa4e8dc25.jpg
    9115d8e1c2525d8a83e41faaa4e8dc25.jpg
    473.3 KB · Views: 0
  • 4b24f8415c3ae13fb7dca8371fb1d13a.jpg
    4b24f8415c3ae13fb7dca8371fb1d13a.jpg
    424.9 KB · Views: 0
Last edited:
To avoid these ads, REGISTER NOW!
S

Shiftless

Well-known member
Joined
Mar 9, 2014
Messages
14,544
Location
East Bay SFO
Larry:
You’re coming up with some great deals :beer:

Any GJ guys remotely close to Paso should scoop up that Proto box for a mere $50
(I’m 200+ miles away)

And the Baldor grinder with the matching correct stand is a screaming deal as well.
Just like you, I already have more grinders than I need. 2 classic Craftsman “block” grinders as well as a smaller Bluepoint.
But the Baldor is a superior piece of equipment.
 
Last edited:
L

larryq

Well-known member
Joined
Jul 12, 2011
Messages
2,421
Shiftless said:
And the Baldor grinder with the matching correct stand is a screaming deal as well.
Just like you, I already have more grinders than I need. 2 classic Craftsman “block” grinders as well as a smaller Bluepoint.
But the Baldor is a superior piece of equipment.
Click to expand...

And how. If I didn't already have a 1/3 HP Baldor, along with the required block grinders, I'd be seriously tempted to get in the car and drive the 100 miles to Sac. But it's way more grinder than I need and garage room is tight.

I like my block grinders, but you're right, the Baldor is simply at another level. That grinder plus eye shields plus stand is well over $1k new.

The proto box is another one I'm glad I'm several hundred miles away from!
 
S

Shiftless

Well-known member
Joined
Mar 9, 2014
Messages
14,544
Location
East Bay SFO
Larry mentioned the “required Block Grinders” ... funny :bounce:

How many of us have a Craftsman “block” grinder AND a Wilton bullet vise, AND a Craftsman King Sealy drill press... just because of our association with Garage Journal???

What are the other touchstones of membership I am not mentioning?
(Sorry to temporarily hijack this thread)
Back to the deals...

..........................................................................................................

Here is a great deal on a table saw for $50 in Placerville CA. (Haha... I already have 2 table saws)
Looks kinda like a Rockwell or ???

https://goldcountry.craigslist.org/tls/d/rip-saw-industrial/6759921993.html
 

Attachments

  • 1D6EF9C1-F491-4086-9F1B-B21232FDDB64.jpeg
    1D6EF9C1-F491-4086-9F1B-B21232FDDB64.jpeg
    71.9 KB · Views: 22
Last edited:
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
bargainhuntingking said:
NW Washington State:


Delta Rockwell Homecraft Workshop with tablesaw, planer, drill press, sander attachments for $100!

https://bellingham.craigslist.org/tls/d/tablesaw-delta-homecraft/6757853119.html
Click to expand...

Craftfab said:
In theme of post right above, here is one seller with a ton of nice restored Delta/Homecraft

https://roanoke.craigslist.org/search/sss?userid=341680342

Big price difference but may by of interest to folks
Click to expand...
$100.00 For All That Heck Of A Price!!
Someone May Buy To Flip!!
 
B

bargainhuntingking

Well-known member
Joined
Nov 22, 2013
Messages
434
Location
The Amazing Pacific Northwest
bubinga said:
$100.00 For All That Heck Of A Price!!
Someone May Buy To Flip!!
Click to expand...

It was a great deal but I have no garage space to store it nor truck/trailer/moving help to load it. Also, I've been told the combo machines aren't as good as buying dedicated individual machines for the various functions. I've never used a planer, table saw, drill press yet so I don't know the subtle details as to what to look for and what to avoid. Still, the older, heavier duty machines without all the plastic of today's models have lots of appeal.
 
Last edited:
T

trijeff

Well-known member
Joined
Jan 21, 2015
Messages
1,359
Location
Northern Cali
Thanks as always Larry ... got the Wissota for $50 after three others flaked. The seller was getting rid of it because "he got a good deal on a new Ryobi". Ummmmm

Sent from my SM-G900T using Tapatalk
 
L

larryq

Well-known member
Joined
Jul 12, 2011
Messages
2,421
trijeff said:
Thanks as always Larry ... got the Wissota for $50 after three others flaked. The seller was getting rid of it because "he got a good deal on a new Ryobi". Ummmmm

Sent from my SM-G900T using Tapatalk
Click to expand...

Glad you got it, be sure to post pics in the vintage grinder forum when you get a chance...as for the Ryobi "replacement" all I can say is My God.
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
trijeff said:
Thanks as always Larry ... got the Wissota for $50 after three others flaked. The seller was getting rid of it because "he got a good deal on a new Ryobi". Ummmmm

Sent from my SM-G900T using Tapatalk
Click to expand...

larryq said:
Glad you got it, be sure to post pics in the vintage grinder forum when you get a chance...as for the Ryobi "replacement" all I can say is My God.
Click to expand...
Me Three!!
Must not know too much about tools.
Glad there are people like that though. |
Good for us!:beer:
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom