To avoid these ads, REGISTER NOW!

Show your new tool arrivals

D

designer485

Well-known member
Joined
Jan 12, 2010
Messages
547
Location
Orange County, CA
I threw a last second bid on a FHLFD80AR and won it for $62 shipped! Not bad for my first 80t Snap-On ratchet. A little scuffed up, but looks good and I won't be afraid to actually use it.

i-PtQsZqf.jpg


i-fzfsR4j.jpg


i-pHctH4C.jpg



I also scored a Snappy 1/4 drive bit holder for $3. I've been wanting to throw together my own 1/4 drive bit t-handle out of Snap-On parts so here are the results. Sliding T Handle, 5in Extension and the TMBS8.

i-2KX8cxg.jpg


i-mMTJ9zN.jpg



Replaced the worn 20t gears in 2 of my Snap On T series 1/4 ratchets with the upgraded 30t. Definitely an improvement.

i-wkQ9D2t.jpg
 
Last edited:
To avoid these ads, REGISTER NOW!
C

CoogarXR

Well-known member
Joined
Jan 11, 2016
Messages
6,853
Location
Ohio
snooter said:
Waited a month for these...Sunflag JIS...all made in japan
Click to expand...

OOH! Where did you get those? I have been meaning to get a JIS set, but they are all so boring and ugly next to my colorful Xcelite/Vaco collection, lol. These translucent handles would fit right in!
 
S

Stooge

Well-known member
Joined
Mar 24, 2013
Messages
3,533
Location
South Shore, MA
PelicanPines said:
Wonder how many will be sold in the next 48 hours... It's under $22... will just order online... not worth hunting down a random truck at a repair shop.
Click to expand...



^ I was about to order one along with some other stuff, but im getting a backorder/ out of stock message for the little pry bar :lol_hitti
 
S

snooter

Well-known member
Joined
Feb 7, 2013
Messages
100
CoogarXR said:
OOH! Where did you get those? I have been meaning to get a JIS set, but they are all so boring and ugly next to my colorful Xcelite/Vaco collection, lol. These translucent handles would fit right in!
Click to expand...

Amazon....Japan Select is the seller....they are good to go...trusted seller/shipper
 
L

L.Cheapo

Well-known member
Joined
Oct 23, 2014
Messages
5,911
View media item 91400I needed a pick longer than the mini pick set I have replacing a door lock actuator and these were on promo, the pry tool everyone seems to be buying, and the discontinued HS50 Quick Cutter set. I had one on my wish list for a long time, and someone here posted it was discontinued. Sure enough, it was. I texted my dealer, he didn't have any, but another dealer on the dealer-only Facebook group did. My guy got it from him and now its mine for just a few bucks more than a used one on Ebay.
 
L

lugnut71

Well-known member
Joined
Feb 14, 2013
Messages
1,898
Location
Wyoming
i swore those hs50 were still available month or so ago. Anyway my dealer has a new one on his truck if someone is wanting / needing one.
 
L

L.Cheapo

Well-known member
Joined
Oct 23, 2014
Messages
5,911
lugnut71 said:
i swore those hs50 were still available month or so ago. Anyway my dealer has a new one on his truck if someone is wanting / needing one.
Click to expand...

Possibly. I called Snap-on and asked, they confirmed it was discontinued and there were none in any of their warehouses.
 
To avoid these ads, REGISTER NOW!
A

Alaniho

Well-known member
Joined
Feb 9, 2017
Messages
183
Location
Ireland
upgrading said:
Too bad you can't get decent stuff over there.
The 61A is a nice driver.
Click to expand...

Yep,it seems well put together and not rattley like some of these multi bit drivers. Impressive how they can make in the US and sell on Amazon for 8.99USD. Channellock would have to make this for under 2 dollars net to be on Amazon at this price level.
 
E

ex-x-fire

Well-known member
Joined
Nov 10, 2012
Messages
3,750
Location
Sheboygan Falls Wi.
protegeV said:
Let us know your thoughts after you use it a few times. My MAC guy has been trying to talk me into it, but I haven't caved yet.
Click to expand...
I'm on the fence about these, the torque that reaches the nuts & bolts is so reduced, its frustrating. Its about on par with a good air ratchet. My advice is get a demonstration before purchase.
 

Attachments

  • images7B0U57JJ.jpg
    images7B0U57JJ.jpg
    9.4 KB · Views: 299
Last edited:
S

Skin

Well-known member
Joined
Feb 24, 2010
Messages
11,713
Location
Boston
ex-x-fire said:
I'm on the fence about these, the torque that reaches the nuts & bolts is so reduced, its frustrating. Its about on par with a good air ratchet. My advice is get a demonstration before purchase.
Click to expand...

They've been around since the 80s and im not sure I see a purpose these days with flat head air ratchets and long ratcheting wrenches.
 
I

Ign

Well-known member
Joined
Jul 7, 2006
Messages
12,769
Location
Butte Peak ND
Snappy Dual 80 reversible ratcheting wrenches in both flavors.

Can't believe I spent this much on wrenches but I think my favorite tool is fixed (ie non-flex) reversible ratcheting wrenches.
 

Attachments

  • IMG_20190320_183342668.jpg
    IMG_20190320_183342668.jpg
    160.6 KB · Views: 264
F

fang123

Well-known member
Joined
Jan 20, 2010
Messages
348
Location
Hastings, Pa.
Ign said:
Snappy Dual 80 reversible ratcheting wrenches in both flavors.

Can't believe I spent this much on wrenches but I think my favorite tool is fixed (ie non-flex) reversible ratcheting wrenches.
Click to expand...


Gawd, I need a few minutes to myself.....in private.
 
Z

zarbat007

Well-known member
Joined
Sep 24, 2012
Messages
105
Ordered a couple of miscellaneous Koken sockets from Japan. They are well built and have a beautiful consistent satin chrome finish on them.






Double universal joints 1/4 and 3/8 drive



21 mm in both 3/8 and 1/2 Drive, deep 14 mm 1/2 drive, all 12-point from Koken's standard line



14 mm 12 point magnetic Zeal spark plug socket




10 mm Koken Zeal short socket on left, Snap-on on right



10 mm deep Koken Zeal and Snap on

 
I

Ign

Well-known member
Joined
Jul 7, 2006
Messages
12,769
Location
Butte Peak ND
nichocha33 said:
What was the wallet damage,if you don’t mind me asking.


Sent from my iPhone using The Garage Journal mobile app
Click to expand...

I think it was $300 and $375 so $675 total. All NEW on eBay.

Crazy I agree but considerably cheaper than retail - mostly on the metric set which is supposed to go for a little over $500. The fractional set I saved about $40ish over the website
 
S

sweet victory

Well-known member
Joined
Jun 9, 2016
Messages
1,263
Location
USA
Snap on man dropped off my pop corn machine and a few other goodies.

Here is the popcorn machine sitting in my laundry room. Not sure where this thing will end up; it's huge! Some people may accuse me of being a tool snob...well now I'm going to be a popcorn snob. :lol_hitti



The sockets I ordered got dropped off as well. Normally a $885 set, dealer gave it to me for $480.






He also had a guy trade in an XZN/triple square bit socket set. Only the 8 had been used. Got it for $120. Figured why not right? I've come across a few on my Porsche.

 
S

Sliding T-Handle

Well-known member
Joined
Jan 2, 2018
Messages
74
846b127402828f3032bb726df73a1f92.jpg
70fda6838d29b50b6f06614b5195258e.jpg

Picked these up in Japan at Hodaka Pro Tool Store(A tool lover’s dream store). The Wise Super Ball Wrenches were what I was after; this is the standard size which I decided to get on my 2nd Trip. On my 1st trip i bought 2 sets of the extra long which are identical length as Wiha long. Rockwell hardness is up there close to Wiha at 59 to 61. The cheater bar is what really sells this set to me. While i was looking through the isles, I spotted these levels in clear blocks. I became fascinated but my business trip partners were rushing me so i just grabbed 2 of each.
58204a069e120b5423eec00b4944108f.jpg


Sent from my iPhone using Tapatalk
 

Attachments

  • 846b127402828f3032bb726df73a1f92.jpg
    846b127402828f3032bb726df73a1f92.jpg
    228.3 KB · Views: 2
  • 70fda6838d29b50b6f06614b5195258e.jpg
    70fda6838d29b50b6f06614b5195258e.jpg
    475.3 KB · Views: 0
  • 58204a069e120b5423eec00b4944108f.jpg
    58204a069e120b5423eec00b4944108f.jpg
    439.5 KB · Views: 1
A

ATC

Well-known member
Joined
May 12, 2012
Messages
8,268
Location
VA
Ign said:
I think it was $300 and $375 so $675 total. All NEW on eBay.

Crazy I agree but considerably cheaper than retail - mostly on the metric set which is supposed to go for a little over $500. The fractional set I saved about $40ish over the website
Click to expand...

giphy.gif
 
S

Stooge

Well-known member
Joined
Mar 24, 2013
Messages
3,533
Location
South Shore, MA
sweet victory said:
Snap on man dropped off my pop corn machine and a few other goodies.

Here is the popcorn machine sitting in my laundry room. Not sure where this thing will end up; it's huge! Some people may accuse me of being a tool snob...well now I'm going to be a popcorn snob. :lol_hitti

Click to expand...

Admittedly, if I went over someone's house and saw a big Snap On popcorn maker, I would be pretty impressed and a little jealous, and im not even really a popcorn fan!
 
B

Bigblockyeti

Banned
Joined
Feb 1, 2018
Messages
2,550
Location
Upstate, SC
That snap on popcorn maker reminds me a little of nike watches or taylormade hats or Carroll Shelby making chili seasoning or harley davidson making motorcycles or kawasaki making hand tools or craftsman trying to remain relevant. Some times you just need to stick to what you know!
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom