Let's See Your Recent eBay Purchases!

[eborcim]

1) Granco Flare Nut-Combo, Std, 12Pt Wrench Set, 3/8" to 1 1/8"
2) A NIB-KD Tools Combination 7T, 2 and 3 Jaw Gear Puller
3) 1st in the series 1957 Corvette Hallmark Car Ornament (we have all but the muscle car set)

 

[EdCherry]

Dodgy picture but only got my phone on me.

Brand New T72 - £27
TM4CSA - £5
TM62B - £10
Brand New FL80 - £40

Couple of my recent purchases over christmas.

 

[dieseldodge01]

NOS Husky flex sockets set number 9108 still in cardboard sleeve

 

[jteck75]

I just got this set of Armstrong ratchet wrenches delivered today.

I paid a b.i.n. of $125,maybe a little more than I would normally give for a used set of wrenches,but I'd been looking for a metric set to match my new sae set that I bought last month,and I'd had a hellava time finding them.


This is a Proto 3/8" dr. torque wrench #6066,that I just won last night.

I put in an insane lowball bid on it,not expecting to get it,but after the dust settled,I was the only bidder at $12.50. As soon as it gets here,I'll ship it off to Team Torque and have them give it the once over.

 

[jimbomiller]

Just received my new SO T860MP 1/4" indexing ratchet today!

I'm a big fan of these ratchets but don't know why SO stopped making them...
Were they prone to breaking or did they just not sell very well?

 

[DIAZ 87]

This came in by FED EX today.
"NEW" SNAP-ON TORQUE WRENCH QD2R100 I PAID $110.00 WITH SHIPPING

 

[48548]

Just received my new SO T860MP 1/4" indexing ratchet today!

I'm a big fan of these ratchets but don't know why SO stopped making them...
Were they prone to breaking or did they just not sell very well?

Nice I am also looking for a T860mp, if you know where to get one used or new please let me know, I am still waiting on my used f872mp to get here. That things looks mint.

 

[jimbomiller]

Bought this as NOS - was the only 1 they had but I'll keep an eye out...

 

[48548]

Thanks, I appreciate it.

 

[lynam]

got this off kijiji.ca for 60 bucks cash. What do you think its worth? its my first of many snap on ratchets right now all i have are mac and crappy tire.

 

[Moose-LandTran]

I was hoping Brookesy was going to revive the thread with some of his recent purchases. But until then, i'll show mine.

Snap-on 1/2" drive, 1-7/16" flare nut crowfoot. I don't know why i bought it.

Snap-on 1/4" drive universal 6mm hex driver. Now i need to find a 5mm.

Snap-on 16/18mm short deep-crank wrench. Good for VWs and Audis.

Snap-on 1/2" drive 24mm torque adapter. Again, i don't know why i bought it.

Snap-on brake tools, so i can complete my set.

New Snap-on 12" orange prybar. Not a stiking cap one, will get transplanted.

Klann VW-Audi airbag removal tools. No more using a screwdriver, although i've got it down to an art.

Cox Easiflow caulking guns. They were cheap, made in England. Now i need to find a use for them.

 

[Brookesy]

Did this thread need a bump lol. Ok Moose i'll show my ebay goodies for this month.

9mm Brake pipe spanner.

Double jointed sparkplug socket.

5/8 UJ sparkplug socket.

13/16 UJ sparkplug socket.

Ballpeen Deadblow hammer.

Screw Extractors.

Swivel head ratchet 3/8 drive.

T-bar allen keys.

Toolbox tray.

Valve stem seal pliers.

And lastly & yes i feel dirty buying them but as they were very cheap.

Thats it for now

 

[jckson]

Its really well and good tool kit which have many more tools are available.
This tool are generally used great .....
Thanks

 

[wreckercologist]

Snap-on 1/2" drive, 1-7/16" flare nut crowfoot. I don't know why i bought it.



Snap-on 1/2" drive 24mm torque adapter. Again, i don't know why i bought it.

Moose, we've discussed this before..........you don't need a reason. The tools are there, therefore you must buy them.

Nice hauls, everyone.

 

[Moose-LandTran]

Did this thread need a bump lol. Ok Moose i'll show my ebay goodies for this month.

Double jointed sparkplug socket.

Screw Extractors.

Have you had a chance to try out the double swivel spark plug socket? i've wanted some for a while, but never got round to buying them.

I have a similar set of extractors, they're awesome. As it turns out they're covered under warranty too. I've had about 3 replaced that i broke.

Moose, we've discussed this before..........you don't need a reason. The tools are there, therefore you must buy them.

I know, a few impulse buys. I just saw them and thought "Yep! I'll have that!"

No reason other than i wanted them, but now i need to use them. I'm glad you understand..

Snap-on compession tester. I'm hoping these adapters will be a good addition to my compression tester set i already have. Does anyone have any info on this set?

Sykes-Pickavant drop arm/pitman arm puller. I wanted a puller, and now i have one.

 

[48548]

Not going to say ebay... But close enough.... Here are three that needed a new home with me!!!!!

 

[Moose-LandTran]

********, you like your speeder ratchets, eh? How are those indexing ratchets? I'd like a set of those.

 

[48548]

The indexing are very nice, 72 teeth for the 3/8 and 1/2 and 60 in the 1/4.... When you put them in the unlocked mode, they can be used as a speeder in the push/pull mode.

 

[Moose-LandTran]

The indexing are very nice, 72 teeth for the 3/8 and 1/2 and 60 in the 1/4.... When you put them in the unlocked mode, they can be used as a speeder in the push/pull mode.

Guy i used to work for had a set, they were sweet. I should buy some now that i have the money, but there are so many things to buy!

 

[48548]

Get more dual 80's!!!!!!

 

[tonydanzah]

I can't believe so many of you guys love those things. I found a usa made MAC hard handle 3/8 rotator head on ebay a few years for 30-40. I had it for 4yrs and never could find a use for it. I ended up selling it for $80. Was the best part about that tool.

 

[Moose-LandTran]

Get more dual 80's!!!!!!

So many more choices.. Ratchets, screwdrivers (220+ isn't enough..), pullers, hydraulic press, transmission jack, the possibilities are endless..

 

[48548]

Get a nice Zyklops!!!!!

 

[Moose-LandTran]

Get a nice Zyklops!!!!!

Nah, too ugly. I couldn't live with it.

 

[wolpi]

i told him also that the cyclop is quite fine

 

[jerryW]

Just hit this one this morning,

http://cgi.ebay.com/ebaymotors/ws/e...0319348691&viewitem=&sspagename=STRK:MEWAX:IT

It's listed in the '48 Cornwell catalog as an HR1.


jerry

 

[Zrexxer]

Got my latest eBay purchase today - brand new set of Snap On OXI metrics, from 10mm - 19mm, in a somewhat shopworn tray. I wish SO would make the trays a little more durable, I know I'm not the only one that likes to use them in the drawer. This one takes up less space than any wrench rack.

 

[rocco]

Just won the bid on these last night. Hopefully they are in good shape, pictures aren't the best. All you fools have me jonesing to buy more and more Hard handles and other SO stuff after seeing all the amazing sets on here.

 

[Titus]

Been in a Snappy mood lately...

FLF80
T72
OEXM210B
OEXM220B
SOEXM21

 

[Moose-LandTran]

Got my latest eBay purchase today - brand new set of Snap On OXI metrics, from 10mm - 19mm, in a somewhat shopworn tray. I wish SO would make the trays a little more durable, I know I'm not the only one that likes to use them in the drawer. This one takes up less space than any wrench rack.

Very nice! I used to have a set of them, they were awesome. Wish i still had them.

Just won the bid on these last night. Hopefully they are in good shape, pictures aren't the best. All you fools have me jonesing to buy more and more Hard handles and other SO stuff after seeing all the amazing sets on here.

Ah, another has fallen victim to the hard handles.. What colour are the handles?

Been in a Snappy mood lately...

FLF80
T72

Some nice buys there. You won't be disappointed with the FLF80 and T72, i have them and they're some of my most-used ratchets. I did find that a little gease inside made a world of difference to them. They're great ratchets.



I just bought myself a nice Sykes-Pickavant puller. 12.5" beam, 9" max between jaws, 8" deep jaws. Used once, £35.

 

[Titus]

Some nice buys there. You won't be disappointed with the FLF80 and T72, i have them and they're some of my most-used ratchets. I did find that a little gease inside made a world of difference to them. They're great ratchets.

I got an S80 for Christmas. After using it for a few months, I decided I needed more Dual 80s. I found myself making a list of all the different chrome handled Dual 80s and then thinking I needed to re-organize my tool box to make a drawer just for ratchets. That can't be a good sign.

 

[rocco]

Ah, another has fallen victim to the hard handles.. What colour are the handles?

Orange. i'm thinking i may get a new handle for each one. Anybody know the part #'s?

 

[Moose-LandTran]

I got an S80 for Christmas. After using it for a few months, I decided I needed more Dual 80s. I found myself making a list of all the different chrome handled Dual 80s and then thinking I needed to re-organize my tool box to make a drawer just for ratchets. That can't be a good sign.

Sweet, i don't have an S80.

I find my TF72 is one of my most used ratchets, it's strong and very smooth, great little ratchet. I also need more Dual 80s.

Orange. i'm thinking i may get a new handle for each one. Anybody know the part #'s?

Why replace them? They look to be in very good condition.

 

[Moose-LandTran]

Two more..

Snap-on slide hammer, with hub puller and bearing puller hook. Will piece together the rest of the set.

Kent-Moore CV joint puller attachment.

 

[Brookesy]

On a bit of a spending spree aren't you Moose.

 

[BackTracker]

My very first "big" eBay tool purchase!

Hell, the most expensive wrenches I have ever bought... I'm both nervous and excited!

http://www.auctiva.com/hostedimages...26,349097311&formats=0,0,0,0,0,0,0,0&format=0

Otherwise have bought some sale Gear Wrench ratcheting wrenches, and some Craftsman raised panels and the higher end Craftsman ratcheting wrenches.

 

[Moose-LandTran]

On a bit of a spending spree aren't you Moose.

I don't know what you're talking about, Brookesy..

The voices told me to do it..

I may or may not have also bought two Kuplex 1.5t hooks for my tow rope..

 

[Moose-LandTran]

I may or may not have also bought two more Kuplex 1.5t hooks, because they may or may not have been too good of a deal to pass up...

 

[SocketDeviler]

Your tool passion knows no bounds Mr. Moose.

 

[Moose-LandTran]

Your tool passion knows no bounds Mr. Moose.

Ah, it's true.

I'm better when i have no money. When i have money, i'm always finding new tools to spend it on. I don't go out, don't buy anything else, don't spend it on anything frivilous; just tools.

Luckily, i'm in demand at the moment. Put a new exhaust and anti-roll bars on an Audi S4 recently, rear wheel bearings on a Golf, exhaust on a Fiat, Aligned Nissan X-Trail the other day, did anti-roll bar adjustment on the Audi again today, doing rear brakes on the X-Trail next week, fitting coilovers to the Audi S4 in the next couple days, rebuilding a Golf suspension and servicing it this week.

This thread doesn't show my new tow rope, ball-joint separators or Wurth brake cleaner bottle though, as they weren't from eBay.