Pry bar holder

[hoston23]

I am in need of a pry bar holder to hang from the side of my snap on epiq locker. It needs to be able to hold about 10 bars and the longest is 54 inches. Help please

 

[G1GRANDEUR]

make your own, type in google DIY pray bar holders, you will get an idea.

 

[WittHay]

I use a OTC holder for long prybars, breaker bars and tire tools

 

[rsanter]

Lockable or not?

 

[fourjeepin]

I planned to build one like this, but haven’t gotten around to it. Unsure who’s picture it is, but i saved it from this forum Oct 2015.

 

[Shane6377]

I made mine from a pieces of 3" angle aluminum. I just drilled holes to hold the pry bars. My longest prybar is 36" so that may not work as well for your 54". You would have to lift the bar 9' high to get it out of the slot!


Sent from my iPhone using The Garage Journal mobile app

 

[kbeefy]

I use a OTC holder for long prybars, breaker bars and tire tools

I made one similar to this from C channel....

Lower 'shelf' extends about 5" and is notched for prybars, pro-prod, breakers...
Upper 'shelf' is about 3" and has holes drilled for whatever (screwdrivers, extensions, ratchets...)

 

[gatlibs]

https://www.harryepstein.com/index.php/6-piece-red-metal-pry-bar-rack-for-wilde-pry-bars.html

 

[tylerg1]

https://www.harryepstein.com/index.php/6-piece-red-metal-pry-bar-rack-for-wilde-pry-bars.html

X2!


Sent from my iPad using Tapatalk Pro

 

[RTM]

Woodcraft sells 3 clamp holders, with different slot spacing. This is the largest

https://www.woodcraft.com/products/...MIvfb-uMK15gIViKDsCh0ilwoyEAQYBCABEgL5_PD_BwE

And smallest
https://www.woodcraft.com/products/...MIvfb-uMK15gIViKDsCh0ilwoyEAQYAyABEgIFuvD_BwE

 

[LB-1911]

I am in need of a pry bar holder to hang from the side of my snap on epiq locker. It needs to be able to hold about 10 bars and the longest is 54 inches. Help please

Worth a look -

Part No. 13070H can hang from a welded cabinet or attach to a wall .

Part No. 13070L is a box-lip mounted rack that can hang on the edge of a cabinet or toolbox using magnets.

Both racks can hold up to 12 pry bars

Mayhew™ Dominator® Pry Bar Storage Racks

 

[samss]

https://www.harborfreight.com/18-in-magnetic-tool-holder-60433.html

One of these magnetic strips mounted to the side of a file cabinet holds my pry bars. The handle of the pry bar rests on the top of the magnet strip.

 

[hoston23]

Worth a look -

Part No. 13070H can hang from a welded cabinet or attach to a wall .

Part No. 13070L is a box-lip mounted rack that can hang on the edge of a cabinet or toolbox using magnets.

Both racks can hold up to 12 pry bars

Mayhew™ Dominator® Pry Bar Storage Racks

i looked at these, im just concerned that they are plastic instead of metal.

 

[Tripn88]

The sunex ones look like the snappy holders.

https://www.amazon.com/dp/B000JL33QI/?tag=atomicindus08-20

 

[nichocha33]

Duke engineering, nice metal racks.


Sent from my iPhone using The Garage Journal mobile app

 

[619DioFan]

The sunex ones look like the snappy holders.

https://www.amazon.com/dp/B000JL33QI/?tag=atomicindus08-20

I added one of these to my HF 5 drawer cart. just a DIYer but it works fine ( couldn't close the lid on the cart with the bars in the appropriate spots. I did have to open up some of the holes on the sunex bar holder for the larger pry bars ( used a step bit , no problem ) also have long extensions and long screwdrivers in it.

 

[Arne73]

Heres a Sunex one on my cart..

Sent from my SAMSUNG-SM-G930A using The Garage Journal mobile app

 

[64merc]

https://www.harborfreight.com/18-in-magnetic-tool-holder-60433.html

One of these magnetic strips mounted to the side of a file cabinet holds my pry bars. The handle of the pry bar rests on the top of the magnet strip.

This is how I do it as well, except for the giant pry bars, which just sit on a shelf.