Show Your Heritage Logo Love

[Rileysan]

Guys, Brian needs to wait on the truck bed conversion until he recovers from the cost of the lift kit. The bumper guards were expensive but now he has more tie offs for holding multiple lower rollers



Sent from my iPhone using The Garage Journal mobile app

Check out this ad that appeared on our local CL last week and forget about the photo - read the description. This sounds like my dream car!

 

[Smokeshow69]

Check out this ad that appeared on our local CL last week and forget about the photo - read the description. This sounds like my dream car!

You could fit multiple deluxe rollers on the roof rack [emoji23]


Sent from my iPhone using The Garage Journal mobile app

 

[Rileysan]

You could fit multiple deluxe rollers on the roof rack [emoji23]


Sent from my iPhone using The Garage Journal mobile app

Dude - DUAL fuel tanks!! I could drive to Montana and back without having to stop!!!

 

[Smokeshow69]

Dude - DUAL fuel tanks!! I could drive to Montana and back without having to stop!!!

Kalispell wouldn’t know what hit it [emoji23]


Sent from my iPhone using The Garage Journal mobile app

 

[Username already in use]

Here's a couple of Heritage era pieces that I discovered last week in an antique store.
I thought the 4-way lug wrench would be underline era, but after I cleaned it up a bit, I think it's Heritage.

 

[d42jeep]

Nice grabs! Here is a machinist’s box that the seller decided to keep so I had to be content with a picture.
-Don

 

[Smokeshow69]

Nice grabs! Here is a machinist’s box that the seller decided to keep so I had to be content with a picture.

-Don

Sorry to hear about that Don. That is the worst when a seller backs out. I could understand not wanting to negotiate but to pull it completely is not cool!


Sent from my iPhone using The Garage Journal mobile app

 

[Smokeshow69]

Picked up these heritage items today while running to get some hardware from Home Depot. Hinge handle not in great shape but detent ball is good and if I passed, I would have found a set next week with mine [emoji23] . Early heritage 1/2 speeder??? I haven’t seen this plated / non plated style yet ? Also heritage 12oz hammer with original handle!



Sent from my iPhone using The Garage Journal mobile app

 

[d42jeep]

Sorry to hear about that Don. That is the worst when a seller backs out. I could understand not wanting to negotiate but to pull it completely is not cool!


Sent from my iPhone using The Garage Journal mobile app

It was fine. He never actually said it was for sale. I just asked to see it and he was nice enough to show me. If it had been really pristine I might have tried to talk him out of it but he wanted to keep it for his kids, which I understand completely.
-Don

 

[Smokeshow69]

I paid a visit to Bmwrd0 today



Sent from my iPhone using The Garage Journal mobile app

 

[r_olson_06]

I paid a visit to Bmwrd0 today



Sent from my iPhone using The Garage Journal mobile app

Don't be a tease. Looks like a top and bottom? What did you have to give up for that one?

Looking for a Round Beam Plomb 1068 Double Box End Wrench

 

[Smokeshow69]

Don't be a tease. Looks like a top and bottom? What did you have to give up for that one?

Looking for a Round Beam Plomb 1068 Double Box End Wrench

I paid a little cash and a plomb top chest for this stack. 10 drawer top chest and 8 drawer lower roller. Top chest is dated ‘56?? And bottom is not dated? But we know the crown top logo was either late ‘58 or ‘59. In ‘60 the red and grey rollers were introduced. Not very easy to come by these days, especially when Rileysan is close by [emoji23]







Sent from my iPhone using The Garage Journal mobile app

 

[Rileysan]

I paid a little cash and a plomb top chest for this stack. 10 drawer top chest and 8 drawer lower roller. Top chest is dated ‘56?? And bottom is not dated? But we know the crown top logo was either late ‘58 or ‘59. In ‘60 the red and grey rollers were introduced. Not very easy to come by these days, especially when Rileysan is close by [emoji23]

I'm sorry, but I'll have to ask you to remove any and all pictures, references, or emojis related to your Crown Top roller, as it doesn't fit into the "HERITAGE" category. In fact, you likely just forfeited that roller. After an official ruling, I will be over shortly to remove it from your shop.

 

[Smokeshow69]

I'm sorry, but I'll have to ask you to remove any and all pictures, references, or emojis related to your Crown Top roller, as it doesn't fit into the "HERITAGE" category. In fact, you likely just forfeited that roller. After an official ruling, I will be over shortly to remove it from your shop.

In the name of being correct for this thread, as the self proclaimed Good Samaritan, you should trade me a thread correct deluxe lower roller [emoji23]


Sent from my iPhone using The Garage Journal mobile app

 

[Rileysan]

In the name of being correct for this thread, as the self proclaimed Good Samaritan, you should trade me a thread correct deluxe lower roller [emoji23]


Sent from my iPhone using The Garage Journal mobile app

Hah!

 

[Smokeshow69]

While I was picking up my half thread correct tool stack, I did also score these thread correct items [emoji23] heritage tack hammer with original handle, push drill and 1/2 =v= 6” extension.



Sent from my iPhone using The Garage Journal mobile app

 

[JoCoSawdust]

Ah, I didn't notice on the other page that your 8d roller is a Crown! That's a process crime so I'll take it to nest with my 10d Crown top!

Seriously though, great find. Odd that at least 3 of us in here have mixed logo 10 over 8 stacks.

 

[Smokeshow69]

Ah, I didn't notice on the other page that your 8d roller is a Crown! That's a process crime so I'll take it to nest with my 10d Crown top!

Seriously though, great find. Odd that at least 3 of us in here have mixed logo 10 over 8 stacks.

I do agree that it is odd. The crown roller isn’t marked with a date but it had a short run so we know when it was made. This one came from Bmwrd0 after he got tired of my incessant sniveling over the years. Plus I returned something to him that he regretted trading so that helped my cause [emoji23]the crown roller will get polished and waxed and will look a lot better once I get the overspray off it. The top chest has been spray painted but I will get it all straightened and get the drawers lubed and see if I want to restore it or not. In the meantime I am just super excited to actually have one!


Sent from my iPhone using The Garage Journal mobile app

 

[d42jeep]

I picked up this drill right angle tool simply because of the heritage label. If anyone is looking for one of these let me know.
-Don

 

[Smokeshow69]

While visiting bmw, I also picked up this nice heritage carry box. It reminds me more of a tackle box with the top tray that hinges in the lid.






Sent from my iPhone using The Garage Journal mobile app

 

[Smokeshow69]

While visiting bmw, I also picked up this nice heritage carry box. It reminds me more of a tackle box with the top tray that hinges in the lid.






Sent from my iPhone using The Garage Journal mobile app

 

[ed4banger]

.....

 

[Rileysan]

Here is one you don't often see, Paramo made Craftsman vise.

I need to make friends with guys in Canada so I can find great items like that!

 

[DaveT]

“Blue” Heritage Logo
I posted this earlier today in the “craftsman toolbox Thread” but figured it should be posted here as well.
Went to an estate sale today and picked up what I think is a pretty rare roller set for $40. I just browsed through this whole thread and in less I missed any this will be only the second “blue” heritage logo posted. The other one was post #65 by jbmorrey. Funny thing is that I seen this set in the online pictures a couple days before the sale but wasn’t too interested because they were 3 drawer units. But when I got there and seen the blue heritage logo I couldn’t pass it up. It’s not in too bad of shape. All the drawer handles are tight and the drawers open and close well. A couple dents and dings but that’s all good character. The patina is good and the logos are in good condition. It looks like the original color is a drab green textured or hammered paint. It has the removable top tray insert, which I’m not sure if it’s original but it fits perfect if it’s not. Enjoy the pics

 

[d42jeep]

I found this 3/8” drive Circle H set in a repainted Heritage box at a Nevada estate sale today. The tools and box cleaned up pretty well.
-Don

 

[Rileysan]

I found this 3/8” drive Circle H set in a repainted Heritage box at a Nevada estate sale today. The tools and box cleaned up pretty well.
-Don

That long handle Craftsman ratchet is uncommon and quite popular. Nice find!

 

[ed4banger]

.....

 

[DaveT]

Ed: wow that is an awesome collection! And some great restoration.

 

[Rileysan]

Here is all the models of Reed made fixed base vises, 5179 to 5183. The little 5179 on far right is original paint.

Absolutely gorgeous!

 

[d42jeep]

A neighbor is going to have to tear down an old storage shed soon. He gave us a tour and I spotted this and was allowed to drag it home. I’m seriously considering replacing the original wire and plug.
-Don

 

[Smokeshow69]

A neighbor is going to have to tear down an old storage shed soon. He gave us a tour and I spotted this and was allowed to drag it home. I’m seriously considering replacing the original wire and plug.

-Don

Do it!


Sent from my iPhone using The Garage Journal mobile app

 

[JoCoSawdust]

A neighbor is going to have to tear down an old storage shed soon. He gave us a tour and I spotted this and was allowed to drag it home. I’m seriously considering replacing the original wire and plug.
-Don

Nice find. I brought one of those home solely to scavenge the logo from the case. I couldn't resist plugging it in (the cord was as bad as yours) and taking it for a spin. Saw purred like a kitten. It's still sitting in the case now. I'll get around to replacing the cord one of these days. It seems like it'd be a great light duty saw to use.

 

[Jc2043]

Look what my 83 yo dad had out hidden in his back garage. It needs a lot of TLC but I can’t get over those badges!



Sent from my iPhone using The Garage Journal mobile app

 

[d42jeep]

Nice box. The badge looks like new. You need some Craftsman tools to put in it.
-Don

 

[madison069]

I got it! Paid $150 and it had the red tray along with a little shelf in the middle drawer!

Been looking for a 10 drawer upper box for awhile to go along with my other heritage top box. I've never seen the little shelf in the middle drawer and was happy to get the lift tray too! I'll be cleaning it up and determine if I'll paint it like I did my other heritage box.

 

[JoCoSawdust]

Great score madison!!

 

[madison069]

Great score madison!!

Thanks!

Whats funny about the deal, is the seller bought it from an estate sale this past weekend for $45. He said it sat in the garage for 5 hours with hardly anyone looking at it.

 

[DaveT]

Been looking for a 10 drawer upper box for awhile to go along with my other heritage top box. I've never seen the little shelf in the middle drawer and was happy to get the lift tray too! I'll be cleaning it up and determine if I'll paint it like I did my other heritage box.

Nice score Madison. Those 10 drawer Heritage tops don’t show up often.

 

[outofbounds]

Just took a low-risk low-price flyer on this box (sight unseen). Was Dark Olive Drab ever a thing for these boxes? I told the seller I believed it was a quality repaint (shooting from the hip is a forte) I humbly submit to the experts for your take. Hard to tell from the pics if the Heritage badge is missing or was never there.....

 

[Rileysan]

Just took a low-risk low-price flyer on this box (sight unseen). Was Dark Olive Drab ever a thing for these boxes? I told the seller I believed it was a quality repaint (shooting from the hip is a forte) I humbly submit to the experts for your take. Hard to tell from the pics if the Heritage badge is missing or was never there.....

Definitely repainted bur other than the missing badge, that looks to be great condition. Nice find!