To avoid these ads, REGISTER NOW!

Found a deal on craigslist? - List Here!

To avoid these ads, REGISTER NOW!
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
catalytic said:
20" model...that's a fantastic drill press and a very good deal if you need a big powerful drill. I have the 15" version, and I think it's the best 'general purpose' drill of that size ever made.
Click to expand...
Crabman said:
Half hour east of Wash DC

CLAUSING DRILL PRESS - $250 (Lothian)​

smd.craigslist.org

CLAUSING DRILL PRESS - tools - by owner - sale

Heavy duty clausing drill press Nice tight machine
smd.craigslist.org

Looks gigantic.

clausing.jpg
Click to expand...

mikeinri said:
WOW!

Mike
Click to expand...
Wow is right! That's cheap too! Table isn't all ate up either. Do you think it's 3 phase?
 
C

catalytic

Well-known member
Joined
Jul 16, 2011
Messages
636
Location
Boston, Los Angeles, Cleveland
bubinga said:
Do you think it's 3 phase?
Click to expand...
Almost certainly. Put a cheap VFD on it and have digital variable speed on a 115v household outlet (since these don't have a ton of HP), or swap the motor out the (standard NEMA frame size) motor for single phase. Even a cheap static phase converter would work fine on this machine and then you could run it on a household 220v outlet (like a washing machine).
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
catalytic said:
Almost certainly. Put a cheap VFD on it and have digital variable speed on a 115v household outlet (since these don't have a ton of HP), or swap the motor out the (standard NEMA frame size) motor for single phase. Even a cheap static phase converter would work fine on this machine and then you could run it on a household 220v outlet (like a washing machine).
Click to expand...
Yeah, that's the way my Oliver wood lathe is set up. 110 V VFD with reverse, speed pot, and plus still has the reeves drive.
 
M

MOS3522

Well-known member
Joined
Nov 6, 2022
Messages
1,789
Location
Colorado
Not quite Craigslist, but if you are near Seattle there's a beaut of a lathe/mill setup as well as a bunch of other tools here:

www.auctionninja.com

Emco Maximat V10-P Machine Lathe / Mill With Accessories (READ) #2097 | Auctionninja.com

Nice+lathe%2C+working.++It+is+EXTREMELY+heavy%2C+you+must+bring+help+and+proper+resources+to+move.++Note%2C+there+was+some+minor+damage+when+moving+to+the+warehouse.++One+of+the+posts+on+the+spin+knobs+broke+off+and+one+of+the+wheels+slightly+bent+%28can+be+bent+back+easily+enought%29.%0A%0AIf+yo...
www.auctionninja.com www.auctionninja.com


17410139_20221104235138024iOS.jpg
 
C

compunaut

Well-known member
Joined
May 2, 2017
Messages
144
Location
Fort Worth, TX
MOS3522 said:
Not quite Craigslist, but if you are near Seattle there's a beaut of a lathe/mill setup as well as a bunch of other tools here:

www.auctionninja.com

Emco Maximat V10-P Machine Lathe / Mill With Accessories (READ) #2097 | Auctionninja.com

Nice+lathe%2C+working.++It+is+EXTREMELY+heavy%2C+you+must+bring+help+and+proper+resources+to+move.++Note%2C+there+was+some+minor+damage+when+moving+to+the+warehouse.++One+of+the+posts+on+the+spin+knobs+broke+off+and+one+of+the+wheels+slightly+bent+%28can+be+bent+back+easily+enought%29.%0A%0AIf+yo...
www.auctionninja.com www.auctionninja.com


17410139_20221104235138024iOS.jpg
Click to expand...
My brother is looking for something like this, but in the Midwest someplace.
 
F

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
29,075
Location
Tacoma, Washington
WELLS BROS. "Little Giant" 24-pc Tap & Die Set w/original box
appears to be complete and original.
fabulous.
$125.00 "can ship"
Coupeville, Washington
seattle.craigslist.org

Vintage Tapp & die set - tools - by owner - sale

Vintage little giant tap & die set. Made by Wells Brothers company, Greenfield Mass. USA. Complete set, 10 dies, and 10 taps, original screwdriver. All excellent condition, no rust. Can ship....
seattle.craigslist.org


Wells / Wells Bros. Greenfield, MA / taps & dies / acquired by Greenfield Tap & Die 1912 / patent 311549 Feb 3 1885 & 1048921 Dec 31 1912 Frederic E. Wells / http://vintagemachinery.org/mfgIndex/detail.aspx?id=1269 / https://www.westfield.ma.edu/histor...ads/2018/06/Ducharme-summer-2006-combined.pdf / http://americancenturies.mass.edu/c...id=18426&img=0&level=advanced&transcription=1 /

Wells / F.E. Wells & Son Co., Greenfield, MA / taps & dies / patent 1048921 Dec 31 1912 Frederic E. Wells / acquired by Greenfield Tap & Die 1912 / http://vintagemachinery.org/mfgindex/detail.aspx?id=877 / http://industrialhistory.org/f-e-wells-son-company/ / http://americancenturies.mass.edu/c...id=18426&img=0&level=advanced&transcription=1 /
 

Attachments

  • Wells Bros. Little Giant SAE tap & die set (CL 01).jpg
    Wells Bros. Little Giant SAE tap & die set (CL 01).jpg
    162.8 KB · Views: 23
  • Wells Bros. Little Giant SAE tap & die set (CL 02).jpg
    Wells Bros. Little Giant SAE tap & die set (CL 02).jpg
    132.2 KB · Views: 16
  • Wells Bros. Little Giant SAE tap & die set (CL 03).jpg
    Wells Bros. Little Giant SAE tap & die set (CL 03).jpg
    128.9 KB · Views: 35
M

mikeinri

Well-known member
Joined
Nov 29, 2019
Messages
8,255
Location
MA
Wow, those are really nice. Replaceable die cutters, I'd think you could also use those as thread chasers?

Mike
 
Last edited:
C

catalytic

Well-known member
Joined
Jul 16, 2011
Messages
636
Location
Boston, Los Angeles, Cleveland
losangeles.craigslist.org

SANDMASTER BELT SANDER - tools - by owner - sale

SANDMASTER BELT SANDER , Hi there this belt sander comes with out motor or stand . in good working condition , thank you for whatching my add , and have a nice day . no less
losangeles.craigslist.org

$250 Burr King precursor, the MacCarthy SandMaster (Burr King bought their patents/plans in the early 1950's and started calling them BurrMaster, then later Burr CHief and Burr King). I'm tempted but I have 3 burr kings and I'm out of room.

A guard is missing on the top wheel (they often are missing), and you'll need a motor (they didn't sell them with motors until later). These early ones have a different belt tensioning mechanism than the later ratchet type, but no issues with it -- just takes an additional 5 seconds to change sanding belts.
 
To avoid these ads, REGISTER NOW!
B

bl00

Well-known member
Joined
Oct 6, 2006
Messages
1,014
Location
Chantilly, Virginia
pittsburgh.craigslist.org

Milling machine and shaper - small shop - tools - by owner - sale

Small scale Atlas milling machine and Ammco 6” shaper. The milling machine is in very good near original condition. Is on an original wooden stand and is powered. The belt cover is missing, and it...
pittsburgh.craigslist.org

Atlas mill and Ammco shaper - $1000 for both
 

Attachments

  • cl1.jpg
    cl1.jpg
    99.5 KB · Views: 16
  • cl2.jpg
    cl2.jpg
    98.8 KB · Views: 17
C

Crabman

Well-known member
Joined
Dec 17, 2017
Messages
3,869
Location
Alexandria, VA/Dameron, MD
Cool old school tire balancer. 30 minutes south of Wash DC


Coats micro precision wheel bubble floor balancer - $150​


smd.craigslist.org

Coats micro precision wheel bubble floor balancer - tools - by owner...

This is a vintage floor model bubble balancer for wheels and tires. The head is like the later coats m-76 floor models but the body is round and all steel and it uses a hand slide lever. I think...
smd.craigslist.org

coats.jpg
 
C

Crabman

Well-known member
Joined
Dec 17, 2017
Messages
3,869
Location
Alexandria, VA/Dameron, MD
SW Va, south of Roanoke near Virginia Tech.

I had to post this as it has the potential to be the ultimate holiday gift!

Deere Gator $6000. A real Gator.gator.jpg

orlando.craigslist.org

John Deere gator - atvs, utvs, snowmobiles - by owner - vehicle...

John Deere trail gator , 2 wheel dr , 877 hours , original owner , great condition, electric dump bed, $6000. obo great Christmas gift ! .
orlando.craigslist.org
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
Crabman said:
Cool old school tire balancer. 30 minutes south of Wash DC


Coats micro precision wheel bubble floor balancer - $150​


smd.craigslist.org

Coats micro precision wheel bubble floor balancer - tools - by owner...

This is a vintage floor model bubble balancer for wheels and tires. The head is like the later coats m-76 floor models but the body is round and all steel and it uses a hand slide lever. I think...
smd.craigslist.org

coats.jpg
Click to expand...
You're all over these hot deals aren't you? Thanks for all the work.
Merry Christmas to all!
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
N

Nvrplzd

Well-known member
Joined
May 24, 2022
Messages
314
Location
NCR
Being right across the Potomac from me is awful dangerous with as many Craigslist deals as you find in this area.. why don’t you search Orlando or Phoenix areas for a while instead :ROFLMAO:

Crabman said:
SW Va, south of Roanoke near Virginia Tech.

I had to post this as it has the potential to be the ultimate holiday gift!

Deere Gator $6000. A real Gator.
Click to expand...
 
C

Crabman

Well-known member
Joined
Dec 17, 2017
Messages
3,869
Location
Alexandria, VA/Dameron, MD
Well I hit that gator in Orlando even though it is SW Va., our daughter's family lives down there and we are going down in a couple of weeks for her baby shower (grandson due in Feb!) so I was perusing the stuff down there. Phoenix not so much!

Will have to keep tempting you if I can!

Have a very Merry Christmas!
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)

Set of 6-ton jackstands - $40 (Pittsburgh)​

pittsburgh.craigslist.org

Set of 6-ton jackstands - tools - by owner - sale

this is a set of 6 ton jackstands that are in great working condition. I got them for working on my car, but I no longer am wrenching on it as much anymore. They are performance tool brand. 
pittsburgh.craigslist.org

Set O 2 on Amazon
00w0w_199xhX7I0gGz_0lM0CI_1200x900.jpg

set of 6 ton jackstands that are in great working condition. I got them for working on my car, but I no longer am wrenching on it as much anymore. They are performance tool brand
 
D

Don-F

Well-known member
Joined
Oct 4, 2014
Messages
98
Location
Oregon
You could always try texting like the ad says? Its not my lathe and I was not interested since I already have a 10" The ad was generic, I was the one who told the seller what it was.
 
B

Bartleby

Well-known member
Joined
Dec 23, 2017
Messages
74
Location
California
Reed 1C vise in SF Bay Area $100 firm. Missing jaws.

I would go, but it's too far out of my way. :cry:

sfbay.craigslist.org

Reed No.1C - tools - by owner - sale

Old Reed No.1C. 3 1/2" jaw width. Jaws are missing. Pipe jaws are there. Swivel base. Bottom nut there. Was user vise. No cracks. $100. Only that price because of missing jaws. No haggling. .
sfbay.craigslist.org


00V0V_20whx7AgJ8wz_0t20CI_1200x900.jpg
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
Bartleby said:
Reed 1C vise in SF Bay Area $100 firm. Missing jaws.

I would go, but it's too far out of my way. :cry:

sfbay.craigslist.org

Reed No.1C - tools - by owner - sale

Old Reed No.1C. 3 1/2" jaw width. Jaws are missing. Pipe jaws are there. Swivel base. Bottom nut there. Was user vise. No cracks. $100. Only that price because of missing jaws. No haggling. .
sfbay.craigslist.org


00V0V_20whx7AgJ8wz_0t20CI_1200x900.jpg
Click to expand...
Aren't the jaw supports broken away? I'm not sure.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom