To avoid these ads, REGISTER NOW!

ZMotorsports Shop Projects 2.0

OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
So…..
will it be GrandpaZ?
or ZGrandpa?!
or just GrampZ!

Depends on whether Mike had German roots lol. “I am Zee Grandpa! I ask zee queztions!”

Actually, I'm a bit of an oddity (go figure) as I am not a full descendent of a single lineage before coming to America. My last name is German/Austrian yet my family's heritage is Italian. My Grandfather came over from the "old country" in 1912 and worked in the coal mines of Superior, WY. He went back and married my Grandmother in 1919 and brought her here, therefore my father and his two sisters were first generation Tyrolean/Americans, so I am a second generation Tyrolean/American.

After starting their family in Superior, WY in 1920, he, my grandmother, father and two aunts moved to Ogden, UT area in 1936 after saving up enough working in the coal mines as the weather here was more favorable to my Grandmother's health. Unfortunately she didn't live too much longer after making the move from Superior, WY. My father was 10 or 11 I believe when they moved here to Ogden, UT.

Prior to coming over to the United States, my Grandfather (and Grandmother but not yet married) were residents of a little town at the bottom of the Alps that changed hands throughout the years between Italy and the Republic of Austria. My family's heritage is actually Tyrolean as our little area of the old country was named Tyrol, as it had changed hands several times and had no direct ties to either Italy or the Republic of Austria for all that long. When my Grandfather came over through Ellis Island in 1912 the translators didn't understand him as he spoke a broken dialect of Italian and possibly even some Austrian mixed in their, so they sent him to the coal mines of Wyoming. :headscrat Who knows where he was actually asking to be sent because I can't think anyone would request to go to Superior, WY. It may not have been the middle of nowhere, but you sure as hell could see it from there.:ROFLMAO:

Growing up we adopted many more Italian traditions than German/Austrian even though our name is more on the German/Austrian lineage. My wife informed our kids that Nonna in Italian is Grandmother and that would be ok. My son jokingly said "and what's Grandpa? Nonno?" I know he said it jokingly, however, he was right, Nonno (no-no) in Italian is Grandfather so I think that has stuck but who knows once my grandchild starts speaking. It could be anything.:unsure:
 
To avoid these ads, REGISTER NOW!

OutlawDrifter

Well-known member
Joined
Jan 20, 2015
Messages
3,903
Location
KS
Mike, I've found its best to have something easy to pronounce, otherwise you end up being called whatever the initial mispronunciation is for the duration :ROFLMAO: .

My wife goes by Gigi (gee-gee) and I'm called Pops. My mother was given the name Gramma Soap by my oldest niece after getting her mouth washed out :unsure:, it stuck and she was affectionately referred to as our "Soap" even today years after her passing.
 
Last edited:

Jarhead0408

Well-known member
Joined
Apr 1, 2012
Messages
5,785
Location
Who knows?
Actually, I'm a bit of an oddity (go figure) as I am not a full descendent of a single lineage before coming to America. My last name is German/Austrian yet my family's heritage is Italian. My Grandfather came over from the "old country" in 1912 and worked in the coal mines of Superior, WY. He went back and married my Grandmother in 1919 and brought her here, therefore my father and his two sisters were first generation Tyrolean/Americans, so I am a second generation Tyrolean/American.

After starting their family in Superior, WY in 1920, he, my grandmother, father and two aunts moved to Ogden, UT area in 1936 after saving up enough working in the coal mines as the weather here was more favorable to my Grandmother's health. Unfortunately she didn't live too much longer after making the move from Superior, WY. My father was 10 or 11 I believe when they moved here to Ogden, UT.

Prior to coming over to the United States, my Grandfather (and Grandmother but not yet married) were residents of a little town at the bottom of the Alps that changed hands throughout the years between Italy and the Republic of Austria. My family's heritage is actually Tyrolean as our little area of the old country was named Tyrol, as it had changed hands several times and had no direct ties to either Italy or the Republic of Austria for all that long. When my Grandfather came over through Ellis Island in 1912 the translators didn't understand him as he spoke a broken dialect of Italian and possibly even some Austrian mixed in their, so they sent him to the coal mines of Wyoming. :headscrat Who knows where he was actually asking to be sent because I can't think anyone would request to go to Superior, WY. It may not have been the middle of nowhere, but you sure as hell could see it from there.:ROFLMAO:

Growing up we adopted many more Italian traditions than German/Austrian even though our name is more on the German/Austrian lineage. My wife informed our kids that Nonna in Italian is Grandmother and that would be ok. My son jokingly said "and what's Grandpa? Nonno?" I know he said it jokingly, however, he was right, Nonno (no-no) in Italian is Grandfather so I think that has stuck but who knows once my grandchild starts speaking. It could be anything.:unsure:
Now that was an interesting diversion. Good to know though.

My wife’s family is Polish and I’m pushing hard for them to bring back Polish traditions that they’ve forgotten since they came over. We’re having 5 families come down for Christmas and all of the dishes served will be traditional Polish dishes. My father-in-law is not in good health and unfortunately I’m the one having to wake the rest of the family up to the fact that they need to enjoy the next few years as time is running out. Encouraging them to embrace their culture again is as close to a gift as I can give.
 

Swanny1953

ALLIANCE MEMBER
Joined
Jul 28, 2010
Messages
1,082
Location
Lucas, TX
Mike, I agree with Marc - the name will "come" to you, most likely through your grandkids. My wife's dad became Bampa because our oldest couldn't pronounce Grandpa! It stuck, and got shortened to Bamps by our redhead youngest! I am Papoo, again because that's what Trey could pronounce. Whatever it is, you'll enjoy it!! Enjoy the next part of the journey - it's even better than having kids (especially if your wife was born to be a grandmother, like mine is)!!
 

RickP

Well-known member
Joined
Jan 15, 2013
Messages
1,557
Location
Annapolis, MD
Prior to coming over to the United States, my Grandfather (and Grandmother but not yet married) were residents of a little town at the bottom of the Alps that changed hands throughout the years between Italy and the Republic of Austria. My family's heritage is actually Tyrolean as our little area of the old country was named Tyrol, as it had changed hands several times and had no direct ties to either Italy or the Republic of Austria for all that long.
You never know what you're gonna find here in the zmotorsports thread!

I was just reading about the history of immigration from Tyrol to Syracuse (my birthplace), and I'm amazed to find you recounting the same story about your family immigrating to Wyoming. Small world, isn't it?
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
You never know what you're gonna find here in the zmotorsports thread!

I was just reading about the history of immigration from Tyrol to Syracuse (my birthplace), and I'm amazed to find you recounting the same story about your family immigrating to Wyoming. Small world, isn't it?

It sure is Rick. Seems like it gets smaller all the time.
 

csp

Well-known member
Joined
Mar 23, 2010
Messages
5,720
Location
Franktown, CO
I was in your area a couple of weeks ago going over some operations my company provides at HAFB. It really is pretty and Ogden seems like a safe, clean place to live. I didn't feel uncomfortable at all walking around by myself in the downtown area after dark. Couldn't say the same thing about Denver.
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
I was in your area a couple of weeks ago going over some operations my company provides at HAFB. It really is pretty and Ogden seems like a safe, clean place to live. I didn't feel uncomfortable at all walking around by myself in the downtown area after dark. Couldn't say the same thing about Denver.

Yeah, we love it here. It's my hometown and I can't think of living anywhere else, even though we've visited many nice places in the Western U.S. in our travels. Unfortunately, we have our fair share of crime and it seems to have taken an uptick over the past couple of years. Some of that crime has started to spill out of the rough areas of Ogden and is working its way out into the suburbs now which pisses me off.

There are some nice restaurants in the older area of Ogden that my wife and I like to frequent. During a few weekends in the summer months they have live bands that play around 25th Street near Union Station and sometimes we'll wander around after dinner and take in the music. The blues and jazz bands are great to listen to but some of that other **** they have playing is too much for me so we find ourselves a bit more selective on the bands that we stay and listen to.

Ogden goes all out for the Christmas holiday however. After Thanksgiving they set up Christmas Village at the city park next to the city building/court house and it takes up about 2 full blocks. The lighting of lights at Christmas Village is kicked off with the Christmas parade that takes place the day after Thanksgiving where Washington Blvd. (main street through Ogden) is blocked off and the final float in the parade carries Santa. He has an outdoor booth awaiting him to allow children to sit on his lap in the center of Christmas Village after the parade. It really is quite an experience and used to have that Rockwellian feel to it, but maybe that was just how I choose to remember it. I do recall going to the parade as a young boy a few times with my parents but we've opted to pass on the parade due to the crowds, plus my wife and I are usually working during the parade and lighting ceremony, but we enjoy the village afterwards before Christmas. It is a family tradition of ours before Christmas that we will go walk through the village. It's pretty awesome but the past couple of years we haven't supported it due to their stupid COVID policies that they have implemented. I am told they do not have them this year so we are looking forward to going again this year. They generally have a hot chocolate stand and doughnut stand that we support as well and I'm looking forward to getting back to that with our son and DIL, and eventually grandchild.
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Glad you landed where you did...........pretty sure you wouldn't get this in Superior Wyoming! :bounce:

Oh I agree. And trust me, Superior, WY doesn't exist any longer, it's nothing but a dust bowl. The closest city is Rock Springs where I actually still have some family but they're dwindling. A few years ago during one of mine and my wife's trips to our South Dakota RV/Jeep rally, we stopped by Superior and took a look around, not much to look at other than some remnants of houses and a cemetary.

I am very grateful my Grandparents moved to the Ogden area as I love it here and can't imagine living anywhere else.
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Last night is the first night I stepped foot in the shop in over a week so I turned up the heat a bit and commenced some work on the 31+ year old Snapper walk-behind mower.

A few years ago I had the left side wear through and I had to replace a section of the deck and this past summer I had the right side wear through requiring the same repair. At this point I simply can't bring myself to getting another mower so I am hell bent on keeping this one going and looking as good as possible.

First order of business was to fold a piece of .125" steel plate, then cut some slits in order to gain the curvature that I needed to match the deck radius. Once I snuck up on the radius I welded the cuts and blended them smooth.
mow1.jpg

Sneaking up on the radius.
mow2.jpg

Pretty much there.
mow3.jpg

Now to remove the section that is worn through.
mow4.jpg

Marked the new section from the backside and trimmed to size.
mow5.jpg

After knocking the paint off the deck where the section will be welded, I blued the area and scribed the cut line for a tight fitment.
mow6.jpg

Nice tight fitment and ready to clean and tack weld.
mow7.jpg

That's where I left off for the evening.
mow8.jpg

My FSM for our Fifth Gen Camaro showed up yesterday as well. I ordered this a couple of months ago when I first bought the car but it has taken some time to receive it. I'm kind of **** about insisting I have hard copy FSM's for all my personal vehicles on hand in the shop.
FSM.jpg

Lastly, before closing up the shop I dug out my fixture from back in March of this year when I was approached by fellow forum member Calvin @mpro323 to machine a face plate in order to convert a slimline 1/4" Snap-on ratchet to accept a 3/8" anvil. It turned out great so I kept the fixture that I made to perform the task and decided to make one for myself. My Snap-on RKRFC72 kit will be here tomorrow so I figured I would begin machining the faceplate from my Snap-on TLLF72 slimline 1/4" flex-head ratchet. I also had kept my notes with the dimensions needed on it. Thank goodness, because I couldn't remember the exact size I needed. :unsure:
ratchet.jpg

Thanks for looking.
 

MadeByMiller

Well-known member
Joined
Dec 29, 2018
Messages
1,230
Location
Rapid City, SD
That's some pretty major surgery on the mower deck Mike! I can almost smell the burning powdercoat and dead grass patty from here. Can't wait to see how you manage the bodywork and paint blending and the requisite polishing/paint correction once complete haha!

I was not aware of FSM's (Factory Service Manual for my fellow plebs) and so I looked them up for my Dakota, they are out there on Ebay. I just assumed that my Haynes manual was as comprehensive as it gets. Aside from sheer volume, what do you gain by having the FSM? Is it a tool used mostly for diagnostics or does it have more in depth maintenance schedule info?
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
That's some pretty major surgery on the mower deck Mike! I can almost smell the burning powdercoat and dead grass patty from here. Can't wait to see how you manage the bodywork and paint blending and the requisite polishing/paint correction once complete haha!

I was not aware of FSM's (Factory Service Manual for my fellow plebs) and so I looked them up for my Dakota, they are out there on Ebay. I just assumed that my Haynes manual was as comprehensive as it gets. Aside from sheer volume, what do you gain by having the FSM? Is it a tool used mostly for diagnostics or does it have more in depth maintenance schedule info?

I will document the repair here as well but if you look back to page 77 (post # 3073) you can see where I had to do the same repair to the left side of my old Snapper walk-behind mower when it wore through. I will perform the repair and paint work in the same manner as I did then which actually turned out quite good if I do say so myself.

As for the FSM (Factory) manuals, I have found they are much more in-depth and accurate than the Haynes or Chilton manuals so I prefer them. They also have exact wiring schematics and flow charts compared to the aftermarket. Not saying that the aftermarket ones are bad, not by any means as they can be helpful. However, I have found discrepancies in several of the aftermarket manuals on things like description of operation, wiring and especially torque specifications so I have chosen to spend a few dollars more and buy actual Factory Service Manuals for my personal vehicles and have done so for the about the past 25 years or so now. When I sell a vehicle I used to include the FSM's in the sale but I don't do that any longer and keep them for future use. I used to also include all of my service records when I sold a vehicle but I have found over the past couple of decades that most people will give me a funny look when I hand them the folder of notes/records so I no longer even offer them.

My coach I think will be different as it seems many RV buyers like to have service records so I will certainly provide those when it comes time to sell the coach.
 

MadeByMiller

Well-known member
Joined
Dec 29, 2018
Messages
1,230
Location
Rapid City, SD
I will document the repair here as well but if you look back to page 77 (post # 3073) you can see where I had to do the same repair to the left side of my old Snapper walk-behind mower when it wore through. I will perform the repair and paint work in the same manner as I did then which actually turned out quite good if I do say so myself.

As for the FSM (Factory) manuals, I have found they are much more in-depth and accurate than the Haynes or Chilton manuals so I prefer them. They also have exact wiring schematics and flow charts compared to the aftermarket. Not saying that the aftermarket ones are bad, not by any means as they can be helpful. However, I have found discrepancies in several of the aftermarket manuals on things like description of operation, wiring and especially torque specifications so I have chosen to spend a few dollars more and buy actual Factory Service Manuals for my personal vehicles and have done so for the about the past 25 years or so now. When I sell a vehicle I used to include the FSM's in the sale but I don't do that any longer and keep them for future use. I used to also include all of my service records when I sold a vehicle but I have found over the past couple of decades that most people will give me a funny look when I hand them the folder of notes/records so I no longer even offer them.

My coach I think will be different as it seems many RV buyers like to have service records so I will certainly provide those when it comes time to sell the coach.
Thank you for directing me to the posts on your previous repairs. The back masking is just the type of attention to detail that I was expecting ha! It turned out very good of course.

Great explanation on the FSM's. It's really a shame what you mentioned about the lack of interest in the service records. I would feel like I hit the jackpot if I ever was able to purchase a vehicle from someone like yourself. The folder of records in my opinion would add a sizeable amount of value to the vehicle. Myself, I'm currently trying to sell our F-150. I went out of my way to purchase a CarFax report and I included an image of the first two pages which outline the report in the listing. In the description I mention it and say that the full report is available upon request - well I've gotten zero requests... I have recently though about how little care most people take when it comes to virtually any purchase, but especially the largest purchases we make, homes and autos. That carelessness permeates so many important things in our culture, and I'm often shocked when I see it, being the scrupulous overthinker that I am.
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Thank you for directing me to the posts on your previous repairs. The back masking is just the type of attention to detail that I was expecting ha! It turned out very good of course.

Great explanation on the FSM's. It's really a shame what you mentioned about the lack of interest in the service records. I would feel like I hit the jackpot if I ever was able to purchase a vehicle from someone like yourself. The folder of records in my opinion would add a sizeable amount of value to the vehicle. Myself, I'm currently trying to sell our F-150. I went out of my way to purchase a CarFax report and I included an image of the first two pages which outline the report in the listing. In the description I mention it and say that the full report is available upon request - well I've gotten zero requests... I have recently though about how little care most people take when it comes to virtually any purchase, but especially the largest purchases we make, homes and autos. That carelessness permeates so many important things in our culture, and I'm often shocked when I see it, being the scrupulous overthinker that I am.

I don't think there is anything wrong in being a scrupulous overthinker. My wife feels that I overthink things at times but then she admits that I am just being frugal and thorough before spending money. As for caring for our assets, I agree that people like us are in the minority but if more people would just give a fraction of the thought that we do to a purchase beforehand and then a fraction of the care after the purchase they would be surprised at the outcome and how much better of a situation they would be in. Instead, people have a tendency to make impulse buys on large items and then cry victim when **** goes south, which is generally does.

Case in point, we love our 2003 Monaco Dynasty motorcoach. It has just passed the 20-year old mark and we have had it for 16 of those years in a couple of months, but we are nowhere near ready to purchase another coach for our retirement, yet. However, I have been reviewing data and storing things away in my noggin for when the time comes that we do decide to upgrade coaches. When we go to RV rallies or gatherings, I am always one to talk to owners of various coaches to get their thoughts and/or opinions of their RV. The downside to that is that most can't answer the questions I ask nor do they really have any idea what I'm talking about. They may know the big talking points or what the brochure said, but not much beyond that. I get the feeling that many merely shelled over the money and hopped behind the steering wheel and blissfully drove onward. I have worked on a lot of mid to upper tier coaches over the past 30+ years and I have found that there are pros and cons to ALL of them, there is no one perfect coach that has everything Including ease of maintenance.

I think I've mentioned multiple times throughout my thread here that I would love to have a Newell or Prevost conversion in our stable some day. My wife and I were on a drive over the weekend and after passing a very nice newer Prevost Liberty conversion we got into a lengthy discussion about what we wanted our next coach to be and she was shocked when I brought up a couple that she hadn't heard me mention before. She said "I thought you wanted a mid-2000's Prevost conversion for our next coach?" I replied stating yes.....but....... Seems like there's always a but doesn't it?

I explained that I feel the Newell coaches as well as the Liberty conversions (Marathon close second) being probably the best on the highway, however, they are loaded with so much technology that it makes them near impossible for the average owner to diagnose and repair. Many require the coaches be connected to the company's proprietary systems for diagnosis whenever something in the multiplex system acts up. Also, similar to the Newell coaches, the Prevost conversions use a bladder system for the seals of the slides. These are air bladders that are perfectly timed to deflate prior to the slides being extended and then reinflated once the slide is in position. Also vice versa when retracting the slides. These provide a very positive seal from the outside elements but like everything else, they don't last forever. These air bladder type seals deteriorate and need replacing over time. When that time comes the entire slide must be removed from the buses shell in order to replace the air bladder as an assembly and I simply don't have the capabilities to remove a Prevost or Newell slide room at my home shop. Therefore, I view that as one of the drawbacks to these upper tier coaches in my opinion. The shell and powertrain of the Prevost or Newell don't bother me as they are very repairable and merely nuts and bolts. Granted high end nuts and bolts, but nuts and bolts nonetheless and the service on a 515 HP Detroit Series 60 or a 605 HP Cummins ISX is the same basic service as on my smaller 400 HP Cummins ISL. An overhead is an overhead and a Jacobs compression brake is a Jacobs compression brake. Replacing an air spring or a brake chamber on a Prevost is no different than on my old Dynasty. It's the proprietary items that make me nervous. I feel that the owners of most of these high end coaches that carry a price tag upwards of $2.5M when new don't think about such things and plan on having the factory address any and all issues but that's not me. I don't begrudge them of that, I admire that actually, but I am in a different camp altogether. I feel we will be at a point by retirement that we could afford one of these in the used market running in the $300k-$400k range, however, my fear is that I don't want to purchase something that I cannot maintain. The cost of the coach is merely the price of admission and I have seen the repairs and maintenance items go well beyond what some people budgeted for nor can afford, especially for those who have to hire this work out and are unable to do the work themselves. I don't want to be "that" guy, nor do I want to have to rely on taking it to a factory repair center for work. It's pretty simple, if I can't perform the work, I don't want the coach, regardless of how nice it is.

Our coach has standard bulb type seals at the slides and although are kind of a pain in the *** to replace, they can be replaced with the slide room still in the coach, just takes some time and care. My main entrance door does have an air bladder style of seal but can be replaced relatively easy by removing the door then the air bladder. The multiplex systems on many of the newer upper tier coaches make me nervous as they are so reliant on technology and are proprietary but there are converters such as the older Royale and Country Coach conversions from the mid-2000's as well as the newer Outlaw and Emerald coaches that I have found to be quite user friendly when it comes to working on so one of those may fit the criteria but the Prevost slide seals would still worry be a bit. Then I mention about maybe settling on something a bit more realistic such as a slightly newer model of Monaco or Country Coach similar to what we already have or I have been relatively impressed with the 2013-2017 Entegra Cornerstones but the 2018+ Cornerstones have fallen suit and have put a lot more technology in them that are only accessed via proprietary software and therefore difficult to impossible to diagnose without a factory service center. I follow several RV forums and one common theme amongst the newer Cornerstone owners is the amount of software updates their coaches require. That doesn't give me the warm and fuzzies one bit.

My wife feels as though I am overthinking this, especially seeing as we are still a few years away from our next purchase but I tried explaining that I am gathering information now so that when the time comes I know exactly what we will buy without having to start doing the research then and may have a harder time of finding older data.

But yes, I think I know what you mean by being a scrupulous overthinker. :ROFLMAO:
 

OutlawDrifter

Well-known member
Joined
Jan 20, 2015
Messages
3,903
Location
KS
Mike...just buy a conventional road tractor and have someone build the RV portion to your liking!

My dream setup is still a Kenworth W900 with a box on the back and a nice color-matched enclosed stacker for the cars :cool:


By the way, I don't think there is anything wrong with overthinking things, especially large purchases. I have also learned to not settle, while that can be hard when buying something used, patience is generally rewarded with what you want, at a price you can agree too!
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Finished the deck repair on the old Snapper mower last night.

Tacking the front edge then sneaking up on the back edge alignment.
mow10.jpg

Nice tight fitment.
mow11.jpg

Tack welds.
mow12.jpg

mow13.jpg

Welding completed.
mow14.jpg

Welds metal finished and blended. Prepped for primer and paint.
mow15.jpg

There was no need to back mask or blend on this side as I had hard breaks at various brackets in which to mask to.
mow16.jpg

After a slight scuff and a wipe down with wax & grease remover, I applied a couple light coats of metal etching primer.
mow17.jpg

Followed by a couple light coats of Duplicolor red paint. Luckily I kept the can readily available from the previous deck repair.
mow18.jpg

Unmasked and down off the jack stands.
mow19.jpg


Now I can complete the actual end of season maintenance items and then reinstall the side discharge chute/block-off then it's ready for the first spring mow.

Thanks for looking.
 
To avoid these ads, REGISTER NOW!

PugetDude

ALLIANCE MEMBER
Joined
Mar 13, 2013
Messages
22,481
Location
Superstition Mountains, AZ
I don't think there is anything wrong in being a scrupulous overthinker. My wife feels that I overthink things at times but then she admits that I am just being frugal and thorough before spending money. As for caring for our assets, I agree that people like us are in the minority but if more people would just give a fraction of the thought that we do to a purchase beforehand and then a fraction of the care after the purchase they would be surprised at the outcome and how much better of a situation they would be in. Instead, people have a tendency to make impulse buys on large items and then cry victim when **** goes south, which is generally does.

Case in point, we love our 2003 Monaco Dynasty motorcoach. It has just passed the 20-year old mark and we have had it for 16 of those years in a couple of months, but we are nowhere near ready to purchase another coach for our retirement, yet. However, I have been reviewing data and storing things away in my noggin for when the time comes that we do decide to upgrade coaches. When we go to RV rallies or gatherings, I am always one to talk to owners of various coaches to get their thoughts and/or opinions of their RV. The downside to that is that most can't answer the questions I ask nor do they really have any idea what I'm talking about. They may know the big talking points or what the brochure said, but not much beyond that. I get the feeling that many merely shelled over the money and hopped behind the steering wheel and blissfully drove onward. I have worked on a lot of mid to upper tier coaches over the past 30+ years and I have found that there are pros and cons to ALL of them, there is no one perfect coach that has everything Including ease of maintenance.

I think I've mentioned multiple times throughout my thread here that I would love to have a Newell or Prevost conversion in our stable some day. My wife and I were on a drive over the weekend and after passing a very nice newer Prevost Liberty conversion we got into a lengthy discussion about what we wanted our next coach to be and she was shocked when I brought up a couple that she hadn't heard me mention before. She said "I thought you wanted a mid-2000's Prevost conversion for our next coach?" I replied stating yes.....but....... Seems like there's always a but doesn't it?

I explained that I feel the Newell coaches as well as the Liberty conversions (Marathon close second) being probably the best on the highway, however, they are loaded with so much technology that it makes them near impossible for the average owner to diagnose and repair. Many require the coaches be connected to the company's proprietary systems for diagnosis whenever something in the multiplex system acts up. Also, similar to the Newell coaches, the Prevost conversions use a bladder system for the seals of the slides. These are air bladders that are perfectly timed to deflate prior to the slides being extended and then reinflated once the slide is in position. Also vice versa when retracting the slides. These provide a very positive seal from the outside elements but like everything else, they don't last forever. These air bladder type seals deteriorate and need replacing over time. When that time comes the entire slide must be removed from the buses shell in order to replace the air bladder as an assembly and I simply don't have the capabilities to remove a Prevost or Newell slide room at my home shop. Therefore, I view that as one of the drawbacks to these upper tier coaches in my opinion. The shell and powertrain of the Prevost or Newell don't bother me as they are very repairable and merely nuts and bolts. Granted high end nuts and bolts, but nuts and bolts nonetheless and the service on a 515 HP Detroit Series 60 or a 605 HP Cummins ISX is the same basic service as on my smaller 400 HP Cummins ISL. An overhead is an overhead and a Jacobs compression brake is a Jacobs compression brake. Replacing an air spring or a brake chamber on a Prevost is no different than on my old Dynasty. It's the proprietary items that make me nervous. I feel that the owners of most of these high end coaches that carry a price tag upwards of $2.5M when new don't think about such things and plan on having the factory address any and all issues but that's not me. I don't begrudge them of that, I admire that actually, but I am in a different camp altogether. I feel we will be at a point by retirement that we could afford one of these in the used market running in the $300k-$400k range, however, my fear is that I don't want to purchase something that I cannot maintain. The cost of the coach is merely the price of admission and I have seen the repairs and maintenance items go well beyond what some people budgeted for nor can afford, especially for those who have to hire this work out and are unable to do the work themselves. I don't want to be "that" guy, nor do I want to have to rely on taking it to a factory repair center for work. It's pretty simple, if I can't perform the work, I don't want the coach, regardless of how nice it is.

Our coach has standard bulb type seals at the slides and although are kind of a pain in the *** to replace, they can be replaced with the slide room still in the coach, just takes some time and care. My main entrance door does have an air bladder style of seal but can be replaced relatively easy by removing the door then the air bladder. The multiplex systems on many of the newer upper tier coaches make me nervous as they are so reliant on technology and are proprietary but there are converters such as the older Royale and Country Coach conversions from the mid-2000's as well as the newer Outlaw and Emerald coaches that I have found to be quite user friendly when it comes to working on so one of those may fit the criteria but the Prevost slide seals would still worry be a bit. Then I mention about maybe settling on something a bit more realistic such as a slightly newer model of Monaco or Country Coach similar to what we already have or I have been relatively impressed with the 2013-2017 Entegra Cornerstones but the 2018+ Cornerstones have fallen suit and have put a lot more technology in them that are only accessed via proprietary software and therefore difficult to impossible to diagnose without a factory service center. I follow several RV forums and one common theme amongst the newer Cornerstone owners is the amount of software updates their coaches require. That doesn't give me the warm and fuzzies one bit.

My wife feels as though I am overthinking this, especially seeing as we are still a few years away from our next purchase but I tried explaining that I am gathering information now so that when the time comes I know exactly what we will buy without having to start doing the research then and may have a harder time of finding older data.

But yes, I think I know what you mean by being a scrupulous overthinker. :ROFLMAO:

Mike, you know my new RV horror story from the IRV forum- I would stay away from anything with a multiplex electrical system or anything built during the Covid shutdowns (2020-22). I asked the electrician at the factory who was struggling with the master display panel “what happens when this panel is obsoleted by the manufacturer?”…. Deer in the headlights look.

The driver that returned our coach to the manufacturer told us there are a LOT of “covid coaches” being returned for electrical/electronic issues. Our experience was not unique.

I’m glad your RV has served you well and given you many hours of enjoyment. Your due diligence now will pay off when you are ready to pull the trigger on a newer unit.

Good luck on your journey-(in your case it’s will be an enhanced version of when preparation meets opportunity)

Scott
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Mike, you know my new RV horror story from the IRV forum- I would stay away from anything with a multiplex electrical system or anything built during the Covid shutdowns (2020-22). I asked the electrician at the factory who was struggling with the master display panel “what happens when this panel is obsoleted by the manufacturer?”…. Deer in the headlights look.

The driver that returned our coach to the manufacturer told us there are a LOT of “covid coaches” being returned for electrical/electronic issues. Our experience was not unique.

I’m glad your RV has served you well and given you many hours of enjoyment. Your due diligence now will pay off when you are ready to pull the trigger on a newer unit.

Good luck on your journey-(in your case it’s will be an enhanced version of when preparation meets opportunity)

Scott

Thank you Scott. The whole proprietary thing on the newer rigs make me a bit nervous as most items on these older coaches are just over the counter products which makes it relatively easy to keep an orphan RV on the road. Hell, all three of our coaches over the past nearly 30 years of RV'ing have been orphans and I have been able to keep them all looking and running nearly like new. The first two coaches were purchased as orphans and our current one became an orphan when Monaco went out of business around 2008/2009. Granted, there are some items that require some research to find but they've not been impossible and most items are easily sourced.

Yes, the multiplex systems make me nervous which is why I really like both Outlaw and Emerald converters as they are still using solid state electrical components and full wiring harnesses. I understand the industry's point of view on multiplex systems where they can reduce the wire count significantly in these rigs by sending multiple signals over one wire and then having the modules interpret that data or frequency and for the most part the theory is sound. However, when something goes awry, which in a house experiencing a 7 point earthquake going down the road is bound to happen, it becomes much more problematic to repair without being able to "plug in" and see what the computers or modules are seeing or not seeing. This requires the coach manufacturer's or converter's proprietary software and for the owner/operator who insists on performing their own work it becomes near impossible to diagnose.

As for the selling of our current coach, I sure hope when the time comes that I can find someone who sees it for what it is rather than like any other 20+ year old Monaco on the road as I feel I have done a better than average job of keeping it up to par. I am dumbfounded at the number of new RV owners who have recently (past couple of years) purchased one of these older Monaco or Country Coach RV's and have to resurrect them or bring them back from the dead as the previous owners neglected them so severely. And what floors me even more is that they are still paying top dollar for these neglected rigs that will require a lot of time and money to bring back.

As for my personal experiences, I have not had the best luck selling my stuff over the years because people try to compare my stuff to comparable other stuff and and can't see the differences in the way they are maintained because most people are impulse buyers and don't do their homework. Be it cars, bikes or coaches maybe that is why I hold on to stuff so long is because I can't afford to sell them and start over after taking it in the *** on the sale.:ROFLMAO:
 

lilscorpion

Well-known member
Joined
Mar 15, 2010
Messages
3,600
Location
Colorado
Oh hell Mike, that lawn mower fab is off the freakin charts cool. First pic I was thinking about my mower. Half-dozen pics in I realized that you’re way more ********* than me…it has quite literally NEVER crossed my mind to repair the mower deck even tho it needs it. You’re a mad man.
 
Last edited:

Ohmthis

Well-known member
Joined
Jan 20, 2013
Messages
3,021
Location
Outside of Louisville KY
Thank you for directing me to the posts on your previous repairs. The back masking is just the type of attention to detail that I was expecting ha! It turned out very good of course.

Great explanation on the FSM's. It's really a shame what you mentioned about the lack of interest in the service records. I would feel like I hit the jackpot if I ever was able to purchase a vehicle from someone like yourself. The folder of records in my opinion would add a sizeable amount of value to the vehicle. Myself, I'm currently trying to sell our F-150. I went out of my way to purchase a CarFax report and I included an image of the first two pages which outline the report in the listing. In the description I mention it and say that the full report is available upon request - well I've gotten zero requests... I have recently though about how little care most people take when it comes to virtually any purchase, but especially the largest purchases we make, homes and autos. That carelessness permeates so many important things in our culture, and I'm often shocked when I see it, being the scrupulous overthinker that I am.
I don’t call it overthinking at all. Being prepared and informed is what’s sets the successful and struggling apart. When I set out to do a project be it at home or work, I’ve done the whole thing in my head many times over. I’ve done my research, got my budget (I ALWAYS have a contingency fund built into it also), got my tools ready, and have help if needed. I think that’s why I’m successful at that phase of my life. It also drops the stress level down a few notches too.
 

4 FN 27

ALLIANCE MEMBER
Joined
Oct 19, 2015
Messages
4,635
Location
Minnesnowta
I don’t call it overthinking at all. Being prepared and informed is what’s sets the successful and struggling apart. When I set out to do a project be it at home or work, I’ve done the whole thing in my head many times over. I’ve done my research, got my budget (I ALWAYS have a contingency fund built into it also), got my tools ready, and have help if needed. I think that’s why I’m successful at that phase of my life. It also drops the stress level down a few notches too.
I have to agree.

Mike if you start asking which Sockets, Wrenches or Screw Drivers you should own to fix things them you might start setting foot in the "Analysis Paralysis" zone of over thinking.
 

csp

Well-known member
Joined
Mar 23, 2010
Messages
5,720
Location
Franktown, CO
Ogden goes all out for the Christmas holiday however. After Thanksgiving they set up Christmas Village at the city park next to the city building/court house and it takes up about 2 full blocks.
They had already started the setup when I was there and I wandered around through the buildings that were there. it's pretty cool.
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Oh hell Mike, that lawn mower fab is off the freakin charts cool. First pic I was thinking about my mower. Half-dozen pics in I realized that you’re way more ********* than me…it has quite literally NEVER crossed my mind to repair the mower deck even tho it needs it. You’re a mad man.

Thanks Matt. I'm sure there are a lot of mowers that get scrapped once the deck wears through. I just couldn't bring myself to scrap this one, yet. I hope I never have to. I think I'm to the point of not willing to give up on something and to prove to myself that buying that one higher quality mower at the beginning of one's home ownership can carry through a lifetime of mowing. Possibly a pipe dream but I'm giving my all to prove it to myself. :D


Mike, great job on the mower! I can see it being used for a ton more years ahead. Congrats on the grand baby, can’t wait to hear your “grandpa” name. I think Pops is a good one.

Thank you. I hope it lasts for many, many more years yet and thanks for the wishes on the extended family.
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Mike if you start asking which Sockets, Wrenches or Screw Drivers you should own to fix things them you might start setting foot in the "Analysis Paralysis" zone of over thinking.

Yeah, I guess there is such a thing as too much thinking Pat. I hope I never get to that point.
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Ok, it's official, I'm tired of snow. I've already had the snowblower out more in the past two weeks than all of last year combined and I'm tired of having to clear the drive.

Friday morning I didn't have time to clear the main drive before leaving for work and it was still snowing pretty hard so I figured I'd clear it when I got home. Luckily the sky had cleared early in the day and much of the streets were already melted.

After arriving home from work I shoveled out away from the garage doors enough to get the snowblower in between and went to town. We only had a couple of inches but by the time I arrived home it was pretty heavy and wet.

snow1.jpg

Front yard went relatively quick and only took about 40 minutes to do the entire front drive and sidewalks.
snow3.jpg

snow4.jpg


The back yard had melted a little around the house as it saw sun but that was about it.
snow5.jpg

The downside to the back yard is the snow has to be thrown three times. Once.
snow6.jpg

Twice.
snow7.jpg

And the third time finally makes it to the lawn. However, by the third throw it's like throwing concrete so the swaths have to be reduced which add to the time.
snow8.jpg

Back yard took about 1.5 hours and I finished just as the sun was setting so I had to turn on the flood lights for the back yard. Those were a great addition a couple of years ago and so glad I added them.
snow9.jpg

Unfortunately now between my shop and the neighbor's shop that is completed, my back yard won't see the sun until spring again.

Thanks for looking.
 

signcrafter

Well-known member
Joined
May 9, 2012
Messages
12,526
Mike I hear you on the snow. We have only had a few coverings in Iowa and they melted. Was almost 60 yesterday. This week we supposed to get 1 to 3 and temps drop down below freezing for the extended forecast so it should be white here by the weekend. The house in Wisconsin has seen a little more snow but nothing serious.

When we bought this house it used to he a grocery store back in the day. So the whole front of the double lot is concrete and it's on a corner. So I have to blow from one end to the other and if its wet it *****. I bought an old montgomery ward tractor with a plow and blower. That blower has been a life saver. Will blow 20 to 30 feet easily and the tractor has wheel weights and chains so it just goes. The road on the side of the house is gravel and last year my neighbor had a heart attack so I thought I would be nice and blow his road, about 5 to 600 feet long. It was the first storm and the gravel wasnt froze in yet and I picked up a rock and it bent my auger shaft. So I used the plow the rest of the year. Bought a 30 ton press and got some metal to make up a jig to try and straighten it out last spring. It also had a leak from the axle seal. So I tore it all down this summer. The axle seal wasnt outboard like a truck, axle tube is dry and seal is where axle tube meets gearbox. So I had to basically split this tractor to get to it. Life happened and been so busy with everyone elses stuff and moving to a different state and remodeling 2 houses in 2 different states that the tractor is still sitting in pieces. Probably should get busy on that this week. We have a walk behind blower similar to yours that I took to the wife in wisconsin. Still trying to convince her we need a skid steer, think I'm making progress but she still hasnt given the full ok yet. Lol.

But think if I had a drive as big as yours I would be looking at a tractor and blower combo of some kind. It's so nice to just hop on and put in gear and watch the snow fly. Would knock that out in no time and you could be in the warm shop working or warming up with the little one when they get here. Lol
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
I didn't have much time in the shop Saturday as we had a family wedding right smack in the middle of the day. My wife and I eased into our morning by sitting in front of the fireplace drinking our coffee. What a great way to start a day and one I look so forward to after retirement.

I then decided I'd run out to the shop and get my ratchet mod completed before we had to leave for the wedding luncheon and reception.

I had machined a face plate for Calvin @mpro323 earlier in the year and liked the mod so much I opted to do one for myself.

Here are my assorted Snap-on ratchets. The two on the far left are my oldest and now least used as they are the old style and courser tooth designs. You can tell by not having the sealed heads for starters. From the third over are my most used ratchets, #3 being a fine tooth 1/4" drive, #4 fine tooth (Dual 80 design) 3/8" standard length, #5 flex head 3/8" slim head, #6 3/8" drive small body short, #7 is my newest that is a fine tooth extra long 1/4" slim head and the last one is my Dual 80 fine tooth 1/2" drive long ratchet. I also have a standard Dual 80 1/2" drive but forgot to include it in the picture. I have a few of the Instinct comfort grip handles of each size but for the most part I prefer the standard chrome handles to the comfort grips.
ratchet1.jpg

The higher torque capacity ratchets from Snap on have the fasteners going from the head into the faceplate such as this 1/2" drive.
ratchet2.jpg

Here you can see the screws threaded into the faceplate.
ratchet3.jpg

Older course tooth ratchets don't have the sealed gear heads.
ratchet4.jpg

But they have the screws going through the head and into the faceplate.
ratchet5.jpg

Then moving up to the newer ones that have the sealed heads which are the fine tooth Dual 80 design but have the screws going from the faceplate and thread into the underside of the head for the standard lengths and stubbies. Also, if you look at the one completely perpendicular here you can see how those that have the screws going from the faceplate into the head how the heads of the fasteners stand slightly proud to the faceplate.
ratchet6.jpg

This recess machined in the faceplate also creates a slightly weaker faceplate and Snap-on had reported failures in this area on their extended ratchets due to the leverage factor.
ratchet7.jpg

The two designs side by side. Both of these are of the 1/4" slim line flavor.
ratchet8.jpg

Here is a 3/8" drive slim line head for comparison.
ratchet9.jpg
 
Last edited:
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Moving on the modification required to convert a 1/4" slim head flex extended length over to a 3/8" slim head flex extended length. The main purpose is for clearance and what some people have done is merely swap heads over but the correct way to do it in my opinion is to machine the faceplate so that you can keep the screws going through the head and into the stronger full thickness faceplate. My Snap-on dealer had the RKRFC72 rebuild kit for a 3/8" drive ratchet. I began by disassembling my TLLF72 extra long ratchet.

Here is the faceplate removed and mounted to my fixture plate.
tllf1.jpg

Taking some initial measurements then off to the milling machine.
tllf2.jpg

Fixture plate mounted in the mill vise and I set up the work stop just in case it needed to be removed from the vise so I could reinstall it in the exact same orientation.
tllf3.jpg

Gauge pins at the ready and my Blake coaxial indicator ready to center the bore under the quill.
tllf4.jpg

Centering the work.
tllf5.jpg

After a few passes using my smaller 2" Criterion boring head I snuck up on the .520" diameter bore.
tllf6.jpg

The next step was to bore a recess approx. .047" deep to allow the seal to set in.
tllf7.jpg

The recess needed to be .595" diameter.
tllf8.jpg

tllf9.jpg

More to follow....
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Continuing on..

After the measurements at the mill were reached, it was time to remove the fixture plate and test fit the 3/8" anvil and sealing washer.
tllf10.jpg

Perfect fit.
tllf11.jpg

Cleaned up the fixture plate and stuffed that and my notes back into a ziplock bag for next time.
tllf12.jpg

Applying some Super Lube into the ratchet body and coating the teeth of the new anvil and pawl.
tllf13.jpg

Faceplate firmly secured in place and the ratchet modification completed.
tllf14.jpg

Ratchets put back in the ratchet drawer and ready for use.
tllf15.jpg

Thanks for looking.
 
OP
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,477
Location
Northern Utah
Mike I hear you on the snow. We have only had a few coverings in Iowa and they melted. Was almost 60 yesterday. This week we supposed to get 1 to 3 and temps drop down below freezing for the extended forecast so it should be white here by the weekend. The house in Wisconsin has seen a little more snow but nothing serious.

When we bought this house it used to he a grocery store back in the day. So the whole front of the double lot is concrete and it's on a corner. So I have to blow from one end to the other and if its wet it *****. I bought an old montgomery ward tractor with a plow and blower. That blower has been a life saver. Will blow 20 to 30 feet easily and the tractor has wheel weights and chains so it just goes. The road on the side of the house is gravel and last year my neighbor had a heart attack so I thought I would be nice and blow his road, about 5 to 600 feet long. It was the first storm and the gravel wasnt froze in yet and I picked up a rock and it bent my auger shaft. So I used the plow the rest of the year. Bought a 30 ton press and got some metal to make up a jig to try and straighten it out last spring. It also had a leak from the axle seal. So I tore it all down this summer. The axle seal wasnt outboard like a truck, axle tube is dry and seal is where axle tube meets gearbox. So I had to basically split this tractor to get to it. Life happened and been so busy with everyone elses stuff and moving to a different state and remodeling 2 houses in 2 different states that the tractor is still sitting in pieces. Probably should get busy on that this week. We have a walk behind blower similar to yours that I took to the wife in wisconsin. Still trying to convince her we need a skid steer, think I'm making progress but she still hasnt given the full ok yet. Lol.

But think if I had a drive as big as yours I would be looking at a tractor and blower combo of some kind. It's so nice to just hop on and put in gear and watch the snow fly. Would knock that out in no time and you could be in the warm shop working or warming up with the little one when they get here. Lol


I'm at a conundrum Scott, the Toro snowblower that we bought when still at the last place has a tremendous throwing distance. That is one of the reasons I ended up with the Toro. We had a 4-wheel drive Polaris ATV with a 48" blade on it for about 22 years at the old house but the problem was with a heavy snowfall event I would run out of places to "push" the snow. I would have these large piles or berms at the end of the yard and then in a few days there would be grass showing for much of the yard and these huge piles would take months to melt. I would find myself out in the yard clear into March and sometimes even April trying to break up and disperse these large piles of snow that had turned to ice and throwing them out onto the lawn to melt. I opted to go with a snowblower so I could blow the snow evenly throughout the yard and avoid having these large piles of snow well into spring. It worked great and piles were no longer a worry. At my last place I only had to throw the back yard twice to get around the house and to the shop's approach.

When we moved and built the new shop due to the wide concrete drive and approach it now requires three sections. I've thought about selling the Toro ZTR mower and replacing it with a smaller John Deere riding tractor that I could attach a blower attachment to but here is the conundrum, I don't think I'd gain anything. My neighbor down the street has a similar setup to what I was considering but his blower attachment doesn't even throw the snow as far as my Toro blower. My next door neighbor has a Bobcat with a bucket and he does our cul-de-sac after the plows go through which is greatly appreciated and there have been times he has seen me out there for 2+ hours blowing snow and has come over to offer to clear my drive with his Bobcat but I'm afraid he'll hit my fence or gate and I'd rather not have that damage so I would just as soon do it myself.

As for a larger tractor with a blade or blower, I'm just not willing to spend that kind of money for the 6-12 times a year (average) that I have to clear snow. Granted there are some years that I am clearing snow much more than I care to and there are other years where I only start the blower once or twice. Last year was a good example, as we had a few storms that were rain in the valley and the snow stayed in the mountains. Personally, I think those are the perfect winter storms. However, this year we've already had about 6 snow storms that have resulted in snow on the valley floor and required clearing.

It's just the nature of the beast. Although I want snow in the mountains so we can get our of our drought situation, I just don't want to have to deal with it on the valley floor. :unsure:

Yesterday we had temps in the low 40's and a little rain. It had quit by bedtime and wasn't supposed to continue. However, we woke up this morning to about 1.5 inches of wet heavy snow that was unexpected. Evidently we had lake effect snow overnight. I cleared just the front steps and the drive where the three bay garage doors are before work and will have to clear the remainder when I get home tonight.

The only downside to having a north facing property, is snow. My neighbor across the street seldom has to shovel his drive once the temperature rises a bit and the sun comes out because his south facing drive will melt off. It's a good thing to because he doesn't shovel it anyways, even when it doesn't melt off. My north facing property is heaven about 350+ days of the year but those 6-15 days of snow we get here along the Wasatch Front make me question it.

As I was finishing up Friday night I went into the house to find my lovely wife had a pot of coffee on for me but then she had to ruin it by saying "do you still like your 10k square feet of concrete?" :mad: I was fine until she had to rub it in....
 
Last edited:

4 FN 27

ALLIANCE MEMBER
Joined
Oct 19, 2015
Messages
4,635
Location
Minnesnowta
I've Ok, it's official, I'm tired of snow.

Front yard went relatively quick and only took about 40 minutes to do the entire front drive and sidewalks.



The back yard had melted a little around the house as it saw sun but that was about it.


The downside to the back yard is the snow has to be thrown three times. Once.


Twice.


And the third time finally makes it to the lawn. However, by the third throw it's like throwing concrete so the swaths have to be reduced which add to the time.


Back yard took about 1.5 hours and I finished just as the sun was setting so I had to turn on the flood lights for the back yard. Those were a great addition a couple of years ago and so glad I added them.


Unfortunately now between my shop and the neighbor's shop that is completed, my back yard won't see the sun until spring again.

Thanks for looking.

LOL Mike!!! I use to blow off the area in the shop but like your situation I would have to throw the snow 3 times too. Switching it up to a Skid Steer with a Plow I have it down to about an hour per 6 inches.

The down side to a Plow is the stack height and running out of places to push snow. The Skid Steer allows the ability to stack 10-14 high.

IMG_2405.JPG

PS Send the snow my way!!!
 

gorilla

Well-known member
Joined
Dec 13, 2007
Messages
1,656
Your post about repairing your mower deck reminded me of some mowers that a local rental yard had. They were homemade, the deck was a box made of 1/4" plate. I seem to remember that they had some sort of a belt drive for the blade but it's been long time.
 
To avoid these ads, REGISTER NOW!
Top Bottom