Recent content by 35mm

A door from the shop area to the lean to would be nice. The walk from the shop to the container is a long one as you have it. I would also want a door on the other side of the shop going outside. You don't want to have to walk through the living space to go from the outside to the shop.

Just some closure. There is a vacuum line going from the inducer to what I assume is a sensor that senses the inducer is running. It was cracking so it was cycling on and off. removed cracked portion of line. Problem solved.

I made the mistake of telling the service company that I have two furnaces so I wasn't desperate. I will check the inducer and the main gas valve. Intermittent problems are fun to trouble shoot.

I don't want to make it too easy. ;) It is gas.

My thermostat called for heat and the furnace did this. I lowered the thermostat for a few seconds and turned it back up. It kicked on no problem. I kept if off while we were not home and only turned it on when we were there. It did it again the next day. HVAC guy can't come for a week...

I use a plastic 5 gallon gas container. Just make sure it is labeled well enough that the wife doesn't think it is gas.

I used to manage movie theatres and we used a bunch of the older square ones. Tough as nails. Not sure if this is the case now or not but the default code on all of these used to be 1 and 5 at the same time then 3. I used to try the code on doors I saw in the wild, it often would open the door.

I am a window dealer. Our main window line is Andersen. We do not display the 70 series as they are not that great of a window. Good enough for a garage, maybe. We also sell Sunrise, they are a very nice vinyl window. The price you saw at Home Depot will go up by a factor of 2 or 3 times...

I have an old barn, insert glamour shot. It currently has very non sealed wood siding on it with ridged insulation in the walls. I will someday either replace the siding with new wood or more likely metal. I am putting OSB on the walls so I can use it as a shop. It will not be heated...

Applying 1x2 select pine to the edges will dress it up nice. Hit the top edge with a router if you want to get even fancier.

MDF and a few other sheet good at Home Depot are actually 49x97. https://www.homedepot.com/p/MDF-Panel-Common-1-2-in-x-4-ft-x-8-ft-Actual-1-2-in-x-49-in-x-97-in-M31240849097000000A/202332602

It might be easier to take the roof off and separate the 4 walls. Move in 5 pieces?

Spam attack. It will go away.

I have used a fair number of tools in my life. I have never felt like a tool was actively trying to kill me like the time I used a 100' snake. If you get any slack in the line and the head gets a caught on something it can get ugly. Drain snake story: I used to work at Home Depot. A guy...

This is what I was worried about. Not looking to screw the guys who actually know what they are doing. I like to have projects and I am not opposed to saving some money, but I know there are times when jobs are best left to the pros. Looks like "let the pro do it" is the consensus. What is...