Recent content by 64duece

I used semi rigid 1 1/2" insulation in 2x4 sheets between the perlins. Its silver faced with taped seams. Here's a quick pic before the sheetrock goes up.

Thanks...I've been looking for used equipment in a few hundred mile radius. Good stuff just doesn't seem to come up that often or is missing fingers/parts.

http://www.toolorbit.com/Jet/Jet-752116.html and http://www.toolorbit.com/Jet/Jet-752652.html Looking at ordering these for some floor pan fab work I need to do on a few hotrods. Not an every day tool but want it to work well on 20-22ga steel and occasionally some .090 aluminum in 2ft max...

I'm not trying to prevent what's already down...its down and looks like a rookie job. I'm gonna leave it down for a few months and expect it will get worse. We may re-pour a section at a time and the advice I get here will ensure the next guy is on par because Ill demand better with the...

Apparently nothing :(

What are common causes and what can be done to prevent them? 40x50 poured in mid Dec...its been pretty cold here since but this pour is cracking everywhere. Contractor spread and tamped fill prior to pouring...I inquired if DGA was req'd...they said no this fill was packing really tight. I...

I wouldn't take any chances and would replace the feeder with something suitable for 20A minimum. Even if you don't own, having the "use of it" will be more than worth dropping in some 12/2 or even 10/2 for such a short run. At least you'll know it'll be done correctly as well.

The T5 stuff is your brightest option and light fine down to 0* T8 would be next, little less bright but still same temp. Forget T12...those wont light well even at 32*. I would also lower them to 8ft via chain and use a reflector style fixture. Another option may be 5in led cans. Put three...

Cousin calls me this morning (works for a general contractor) and says...Ive got 14ft of base cabs and 14ft of wall cabinets off the job for your new shop. Come get em before they hit the dumpster! I was out the door in a hurry! Lol

I had a pour done about 7wks ago and they saw cut next day. First concern I had was some chipping next to the saw cracks. Yesterday I found a hairline crack from front to back (40x50) between control cut snd end wall about 14ft in. Not near a post. Guess it just happens...

Just finished my pour last month. Its been approx a month and I'd like to get it sealed before moving my stuff in. Not interested in epoxy or floor paint...just densifier/sealer to help sweeping and some liquid protection. 2000sq/ft coverage is what I need. Feedback on product and price for...

Franklin Twp. I'm building another Nova for 8.50 Index next season. The 10.5 stuff was a blast but, the budget to stay competitive just got outta hand.

Had two friends that did both ways and the 2ft trusses made for a much tighter building, allows the change to sheathing/shingles in future if desired and sheetrock as an option aswell.

South Jersey. Yeah...those names ring a bell I've raced all of them...

Thx...waiting on gutters and the final inspection and c/o. Can't wait to move stuff in and actually use it!