Boosted1's latest activity
-
BBoosted1 reacted to PugetDude's post in the thread Puget Dude’s creations and fabrications (Random project thread.) with
Like.
I would like to introduce into evidence Exhibit "A" as proof I have been working too hard. 🤣 -
BBoosted1 reacted to PugetDude's post in the thread Puget Dude’s creations and fabrications (Random project thread.) with Like.
The stair brackets i bought on Amazon worked out really well. The top two holes actually lined up to the original 20 year old brackets...
-
BBoosted1 reacted to PugetDude's post in the thread Puget Dude’s creations and fabrications (Random project thread.) with Like.
What do you do when you have a bunch of 1" Kee pipe fittings but per code handrail requires 1-1/4" pipe? :unsure: I like the look of...
-
BBoosted1 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Steering lines in brake lines, hoses. Made some body mount bushings Cleaned up the inner fenders. Welded most of the holes up...
-
BBoosted1 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Working on chassis brace under the cab mounts and rear LCA mounts. Since the frame is boxed, the brace can be a pinned connection...
-
BBoosted1 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Drilled a hole in the new oil pan Welded up the new sleeve both sides. Right motor mount Left motor mount...
-
BBoosted1 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Decided to tackle the poor fitting header before the oil pan or motor mounts. These are cheap 302 headers for a 'Ford truck', not a 2WD...
-
BBoosted1 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Designed some motor mounts in CAD. New plasma can cut slots and holes much better, so did a slot/tab design. Offset the bushing away...
-
BBoosted1 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Received bushed sleeves from Barns. Made some custom sized washers Got the motor put into rough position to start on mounts. I...
-
BBoosted1 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Made some progress on the chassis. Got the upper bracketry welded up while the k-member was still in place. Then removed it to access...
-
BBoosted1 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Last guy that worked on these headers threw a tantrum and beat the **** out of one of the primary tubes with a large hammer. With...
-
BThis thread should never have died. Bump.
-
BBoosted1 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Tackled the bent frame horn issue. Step one was cut three sides of the frame at the box seam and bend it out. That left a decent gap...
-
BContinuing on. Before tearing the driver's side of the front axle apart, I moved to the rear to get the differential draining. Oil...
-
BI wasn't able to get much shop time last night due to mowing the lawn. Holy **** is it growing fast. I mowed Saturday and I was...