Recent content by Britrider

The solution...happy holidays!

Red goes to circulator pump, it looks that way after passing through a shut off switch

The Detroit ca295 relay on my ancient American Standard oil boiler failed and made the heat peg constantly. I purchased a replacement from a supply house but have no idea how to connect the wires. Any help is appreciated!

I have a powermate 5000 that was setup to run from a transfer switch, so the p.o. floated the ground. I want to run it as a stand alone in the field so need to bond the ground. Can I just run a jumper wire from a green ground terminal under the cap to a white neutral terminal? Thanks in advance --RW

Checked the output again today. At 130 out of the 240 twistlock. 80 out of the 110 outlets. Increased idle, gained a bit but not enough. Tried flashing again. No improvement.

I used the car battery method and when that failed I tried a drill and a grinder just for the hell of it. No luck.

Forgot to mention that I did flash it. Thanks.

Hoping someone here has some advice. I picked up a powermate 5000 used and at the sellers house we ran it and he demonstrated that it worked by running a skill saw off of it. It was plugged into the twistlock of his house since we had a storm the previous week. I got home and wasn't able to get...

Hey, Thanks for allowing me to take part in the forum. I'm an avid vintage British bike fan, have more than a few classic car projects going on and try to fix everything I can in the house on my own. I'll probably have lots of questions, so thanks in advance!