Recent content by Car Collector Chronicles

  1. C

    Mohawk USL-6000 Scissor Lift

    Am seeking a used Mohawk USL-6000 scissor lift. If anyone has a lead on one, could you please pass tthe info on to me via email sent to - gdy.lrconsult -at- gmail -dot- com. I would appreciate it!
  2. C

    Do your ceiling fans interfere with lighting?

    The ceiling fan in my garage has no negative impact on my fluorescent lighting whatsoever.
  3. C

    TrueLock Premier Garage Floor Tile

    The ideal floor tile, to me would be: 1. Interlocking 2. Permit water drainage. 3. Permit use of floor jack/jack stands 4. Reasonable in cost Any recommendations for a product that meets all these specs?
  4. C

    The Garage Pit

    Unless you have unlimited funds to throw at such a project, as has already been discussed, building codes make construction of a pit almost cost prohibitive. There are stringent electrical, ventilation and drainage requirements. Far cheaper to go with a lift; even a very, very expensive one!
  5. C

    building a shed

    I built my own 12 x 20 shed. I used a gambrel roof. The advantage of it is that it gives me a readily accessible, large upper storage space. Using the gambrel rool is like adding a 1/2 story to the structure. It does have vents in the storage area. I also have 2 windows in opposing walls...
  6. C

    building a shed

    I built my own 12 x 20 shed. I used a gambrel roof. The advantage of it is that it gives me a readily accessible, large upper storage space. Using the gambrel rool is like adding a 1/2 story to the structure. It does have vents in the storage area. I also have 2 windows in opposing walls...
  7. C

    Doubling up pegboard?

    Maybe it is possible to purchase twice the amount of 3/16" pegboard for less than enough to use a single-layer of 1/4", but I doubt it? Secondly double layered 3/16" will do no good unless the two layers are solidly connected to one another. Then, once tied together, I doubt that any available...
  8. C

    gas caddy

    30 gal. weighs in at 240 lbs., per my calculation?
  9. C

    Metric Adjustable Wrench

    The mere title to this thread made me laugh!
  10. C

    Cordless Power Tool-Poll

    Milwaukee
  11. C

    Seeking garage door engine exhaust vent

    I am sure NAPA sells exhaust ports, as that is where I got mine. Years ago, I believe it cost me $49? My recollection is that I traced the opening outline, drilled holes all the way around to remove, and then used a half-round file to clean things up. The ring covers the opening, so beauty...
  12. C

    Mohawk A7 Lift oil capacity??

    Believe it or not, Mohawk has a Facebook page. You might try asking there, or on te Mohawk site itself.
  13. C

    detached garage feed

    You want to run the electrical feed, cable/satellite feed, tel/modem line and maybe even water to that detached garage. I ran all except water, and now wish I had run it!
  14. C

    Lets see your workbench

    Winmon Talk to me about the floor mats I see in the pics: Size, feel, cost, seller, etc.
  15. C

    Old Fashion Grease Pits

    To which should be added, "buliding codes"
See more
Top Bottom