Recent content by chester7

I think it was a 2hp also but cant remember. No it will still be used for the mill but I just built a new shop and want to get the right electrical wiring to the phase converter thinking 20a 220v / 12-2 wire should work if a 2hp eh I had it in my garage with 40a 220v and I think thats a bit...

I have a phase converter I got many years ago but forgot how many hp it is and there is no id tags on it, anyone here have a guess to what size this might be its original color would have been gray eh? Im thinking its either a 2hp or 5hp but not sure i used it to run my mill that has a 2hp 3ph...

What mini split did you use and size? Do you like it?

Your prolly right but if I open the small garage door between the 2 shops I could put a fan to blow cool air in the other shop if i need to work on something in there eh What info do you want?? I ll try to answer with what you are looking for need to get this figured out soon its driving me...

Good Info eh

Which one do you have exactly?? Part # etc? Is it this one it says 350 to 500sq' only http://www.ebay.com/itm/GREE-Crown-12-000-BTU-Ductless-Mini-Split-Heat-Pump-System-23-SEER-208-230V-/201407053798?hash=item2ee4cbbfe6:g:7YYAAOSw4HVWCvEg Thanks

Which ones go down to -22?

If the heater dont work so good I can just put a lp heater in if need be, But I like the A/C part of the mini splits cause the condensor is outside and wont get plugged up with dust, paint fumes etc eh

I just thought I would get a bigger one just in case I want to cool the whole shop someday 1264sq' A bigger unit wont work for the 624sq'???

Hartford WI. 10' R13 walls Kraft roolls R49 celling blown cellous ins

I Just built a 1248 sq' shop with 10' ceilings it will be insulated ceiling and walls but the back half of the shop 624sq' will be heated and cooled only when im in there eh. So im wondering whats the best way to heat and cool this space? I will be doing woodworking cabinetry, welding...

The shop will only be Cooled & heated when im going to be working in there eh. If it gets below 10F how bad does performance drop? I only need it to be 50 or 60 degrees in there to work eh What are the spec I would be looking for? This is the unit I was thinking about eh...

I just built a 1248 sq ft shop I am looking to put A/C and Heat in about 624sq ft of it all insulated and plywood on the walls and im considering using a 24000 BTU 15 SEER Inverter Ductless Mini Split Air Conditioner Heat Pump 2 TON system. Anyone have any suggestion or thoughts on this? Im in...