Recent content by closetoreality

Winter damage and trying to remove/clean-up/replace the damaged concrete pavers. I would assume there is some sort of mortor type-s or thinkset on top of this surface although I am not sure what I am looking at? If I do need to remove material across all of this surface area, would an angle...

Raised the shelter up for a new rig.

My doors face east, when I clean them, they look great, until the sun hits them. I am using a cheap squeegee and invisible glass. I thought eliminating paper towels and keeping it simple would be the ticket. What am i doing wrong?

Is there a proper method for this or does the fascia need to be changed?

I don't think enough information is known to make that statement. If the pressure from the municipal mainline is high enough it's going to increase the velocity in his system to maintain flowrate...burnoulli. unless he has a PRV separating his system from the mainline.

I would start by seeing how long it takes to fill a gallon jug and do the arithmitic to extrapolate that over 60 seconds. That will give you a practical estimate on flow rate. Don't use the cross sectional area of the nozzle. You want a representation of the overall house, so use the pipe of...

thanks for the additional context, big help.

Can you elaborate a little more ?

Picked up a Coverpro for 180.00 with the HF sale going on this weekend. Needed some shelter for the tractor until next spring when I have time to build an actual pole barn. I have it out in the open where I have plenty of room to work while I fine-tune how I want the structure design before...

Did it keep the grizzlies out? :)

I was trying to stay away from needing to pull a permit from the town, but I hear you on that note and I agree. Maybe I will bite that bullet because I know (and as you mentioned) at 1600 in cost i am creeping close to the cost of a legit structure.

Going to be putting up an 10x14 or so Shelter Logic shelter. My initial plans were to bury a 2x4 frame foundation in stone-dust that i could then lay 1/4 inch plywood on, top that with a canvas to barrier out ground moisture, and then top it with another layer of plywood flooring. To tackle any...

with a 5.0XC on it. ??

Bite the bullet buy the BJP1 set and never buy a balljoint press or cup etc again. What are you working on anyway?

So a little update. I decided to pass on a truck box (for the next year or so atleast).....and instead grab something from HD for 400-500 and instead put the cash towards continuing to buy quality tools from my local SO rep. So I guess for me anyway quality tools>box. Cheers.