Recent content by djm999

Finally got the "snows" off the volvo. :beer:

I have a Ranger rolling seat that is still in the box. If anyone is interested, PM me and I'll ship it free to the lower 48 for $40.

I just finished my install of a Bendpak SP-7X flush and I was looking at some old posts to see if anyone had experienced any similar frustrations. I also built my recess pit to the Bendpak specs as richard181 did also as noted above. I had the same experience with the handles welded to the...

Mike, Do I detect the handles on your Bendpak lift extension plates had to be ground off to fit in the recessed floor. I am all too familiar with that. The flush mount specifications are incorrect for the current lift design. See my ground off handle missing in the photo. Did you have to...

I love them all in a completely platonic way!!:beer:

I had a similar experience when purchasing a California Air Tools compressor through Home Depot. HD was one of the recommended suppliers on the CAT website. Unit arrived without wheels and a broken plastic cover. HD customer service dragged their feet with replacement parts and blamed CAT for...

I've had the Vacumaid for 5+ years with great performance and no issues. It would get my vote and I would buy it again! :beer:

Thanks

Thanks Scotty What is the maximum window of time between before scuffing is necessary: Primer to epoxy Epoxy to urethane

I am ready to prime, epoxy and urethane top coat with Legacy Flooring products and I have question regarding the timing. I have read the instructions regarding tack free timing and recoat times but what is too much time between coats? With the local forecast, I may not be able to get all three...

Curious about tinting the top coat; why did you do it?

Scotty, I am confused (not that unusual). Your tech sheet on the 80's solid polyaspartic says a pot life of 25 to 30 minutes. Wouldn't the slow cure be longer than that?

Scotty, What's the pot life of the slow cure 80% solids that you are recommending?

I am considering applying Latiseal stain and sealer to a 6 month old garage floor. Would your HD6500 or HD6600 be an appropriate top coat for this application? Thanks for all of your help and input.

Look no further. This is the best I have found: http://www.rapidreel.com/ :beer: