Recent content by DrHoliday

P.S. This is what it looked like when I got it.

I know it's been a while and I'm probably going to be the only one to read this but I FINALLY got the cabinet done. Due to issues around the house and the weather, it took two months to do it but it's done! This was my first attempt to restore a cabinet and there are some areas that didn't turn...

///MPower, I applied my 6th and final coat of color 2 days ago and let it dry until today when I wiped it down and applied 3 coats of clear. After the 3rd coat I noticed this effect (see pics) I can only assume this happened because of the high humidity. I don't have any experience with...

Nice!! I thought about painting my box in red and the drawer fronts in black but decided not to try getting too creative lol Post pics along the way, I'd like to see your progress and finished product :)

MPower, they should come out nice! If they don't come clean I would cal Snap-On. They sent me 5 sets of slides and 6 casters (2 accidentally, see the post above) for FREE! Which cabinet are you working on?

I went to Advanced Auto and got a 1 gallon can of Gunk chlorinated parts cleaner. It worked great!!

*The paint I'm using is Rustoleum 2X Apple Red gloss. It's not perfect but it's pretty close. One of the drawers had some surface rust in it. I primed it and when I painted it I feathered the new paint in with the old and you can barely see the difference. It was a drawer that hadn't been used...

Thanks guys!! :)

It's been 2 days since I got the 3rd on the cabinet so today I wet sanded with 400 grit. While the cabinet dried I wet sanded the 3 drawers that I had already applied 3 coats to. When the cabinet was dry I put on the 4th coat it and by that time the 3 drawers were dry so I put the next coat on...

I cleaned, sanded and primed the box. I'm posting pictures of the progress in case anyone is still watching this thread & I've also done some of the drawers. Tomorrow I plan on wet sanding what has been primed so I can start painting and then cleaning & priming the remaining drawers. I'm anxious...

Because it's late (and I've showered) I don't want to get back into cleaning tool box drawers so I'm shopping for drawer liners and I came across this...

If I wasn't sold on Snap-On before for the quality of their tools I sure am now for their 5 star customer service. I called them today and asked about the slides. I explained that I was not the original owner and I was told, almost immediately, that they were covered! They asked me how many I...

Waterh20, I have dealt with S.O. customer service and have always been treated well. I cleaned several of the slides and plan on lubing them up tomorrow and installing them. The parts cleaner I'm using worked pretty well, you can see the difference between the dirty ones and the ones I've...

Mr B, I've found a few new slides for SO boxes for around $60/set but they aren't the same model number so I don't know if they'll work. I'm planning on calling Snap-On and Accuride on Monday to find out if there's another model number that will work and if they're covered under the lifetime...

From what I can find online the slides I need are Accuride 8-3388 ALRS slides but I can't find them anywhere. Does anyone know where I might find them or what replacement slide would work?