drs3317's latest activity

I do have an original 115.6962 motor with the built-in switch, but I also have, prefer and highly recommend a foot switch...

Frank, On the 100 and 150 drill presses where do you prefer to install a power switch when you don’t have an original motor with the...

No, the Harbor Freight replacement pump is same as original. Its a fountain water pump.

Thanks for the suggestion but not worth the time and trouble at this point. I have ordered a little giant pump which will work with...

Something to consider too is too much flow can be an issue. I generally use the brush on my tank. Need some flow, but too much makes a...

Thanks for the recommendations and ideas. I ordered the Little Giant PE-2YSA 115V, 1/40 HP, 300 GPH Polyester Submersible Parts Washer Pump

I don't know specifically for a parts washer but Little Giant makes a high quality pump.

Are you using the PE-2YSA?

Do you know what model you are using? Thanks

I used a Little Giant submersible years ago with Varsol successfully.

Yes, from my research kerosene is fine in fuel pumps. Bur the PSC1000 solvent solution will not work in gas and diesel pumps.

I'm going constant flow. After using a diesel pump I learned the PSC1000 solvent solution swells up the seals in gas and diesel pumps...

Little Giant. Around $175

I bought a used HFT parts washer that the pump had gone bad. I wanted to use solvent so got the Tractor Supply PSC1000. Used a bucket...