gagecalman's latest activity

Thanks again for the great replies. I did most of the install and he did the brazing. I did pressure test and vacuum. I checked and...

This is a TXV system. I fixed the original post. I charged to get subcool to 8°. Superheat was 32° so we slowly adjusted the TXV to...

Thanks for the replies and great info. So I feel like the way I have everything set up is fine. He does 99% refrigeration so I guess...

I trying to understand the correct way to set superheat on a TXV system. All new Goodman: GLXS5BA3010 condenser, (TXV, R32)...

Nice job. Did you buy a lot of those tools used because the prices on things like the CPS vacuum pump, Yellow Jacket 1/4" Valve Core...

I believe 0.0005"/12" if I remember correctly. Very sensitive. I calibrated lots of them years ago.

Didn't realize that. Thank for the tip.

I do as well. Every time I'm done with it. Squirt some in and pull the cord a few times and add another squirt. The last one I bought...

Torque and crowfoot wrenches. Do not put anything like Nylog on the back of the flare or the threads. It will affect the torque and you...

It looks like the disposal outlet is almost the same height as the drain so it's too low for it to work properly. Very common issue when...

Do you have access to R32? If you have a leak you will need it once you fix it. Mini splits are not charged with gauges. If you have a...

OP needs to find a way to run a 4th wire between panels before he thinks about cleaning up the wiring inside the panel.

Yea it's always nice to see how things turn out.

I'm not an HVAC guy so take this for what it's worth. I believe you'll have a lot more issues with the newer systems with ECM blowers...

Thanks for the reply. I did call and was told the board is bad and needs to be replaced. The guy that installed it is coming out to...