hewey's latest activity
-
HEnjoying some seat time in old blue at the moment. The XR6 turned 18-years old at the end of May, and I took delivery of it a few...
-
HNow that I've officially finished the Craftsman project, it's time to look over what I spent on it to bring it to spec. First, a little...
-
Hhewey replied to the thread Above 1200 Sq/FT The Cow Pasture Garage - Australia.Lots of work and thought behind it all as always. I dont comment on every post, but enjoy you sharing your progress. Asphalt driveway...
-
Hhewey reacted to kitdoctor's post in the thread Above 1200 Sq/FT The Cow Pasture Garage - Australia with
Like.
Post #0071e - War of the weeds – Tidying and solarisation continued - Part LXVI Hi everyone, Just a short update this time. We’re away... -
Hhewey reacted to kitdoctor's post in the thread Above 1200 Sq/FT The Cow Pasture Garage - Australia with Like.
@Coolabah, at the field days we attended some very interesting points were made. These included: There is so much information...
-
Hhewey reacted to kitdoctor's post in the thread Above 1200 Sq/FT The Cow Pasture Garage - Australia with Like.
Post #0071c - War of the weeds – Tidying and solarisation continued - Part LXVI Next up, some leaves were bagged up and auricles...
-
Hhewey reacted to sakurama's post in the thread Between 485 & 705 SQ/FT Mid-Century Moto Mecca Makeover with Like.
Not to say I've given up on the 3d printing... I was starting a project with the kids and my long rails used to hang on the garage...
-
Hhewey reacted to Beelzeboss's post in the thread Between 265 & 485 SQ/FT CNCs and Hot Rods, a Sydney Garage with Like.
So, the short list for CNC'd hot rod bits is mostly various adapters: - Idle air valve, as I can't drive the 1UZ one with my current ECU...
-
Hhewey reacted to kitdoctor's post in the thread Above 1200 Sq/FT The Cow Pasture Garage - Australia with Like.
Post #0071d - War of the weeds – Tidying and solarisation continued - Part LXVI In this next photo, the berm constructed to deflect...
-
Hhewey reacted to Bob Heine's post in the thread Between 485 & 705 SQ/FT Bob Heine's Auto Emporium with Like.
April was one of those months that sucked me into more black holes than usual. I'll share those holes soon.....
-
Hhewey reacted to Bob Heine's post in the thread Between 485 & 705 SQ/FT Bob Heine's Auto Emporium with Like.
@Squankum, that brought back a memory from 50 or so years ago. As I've mentioned before, when we lived in Wappingers Falls we would...
-
HAnother month and some more progress on many side quests! Say hello to my trusty standard issue Sherlock 100L wheelbarrow Few bits of...
-
Hhewey reacted to Beelzeboss's post in the thread Between 265 & 485 SQ/FT CNCs and Hot Rods, a Sydney Garage with Like.
I think I have the CNC back to being useful, I cut the remaining clamp down holes out to 10.2mm Thread milling the M12 threads was...
-
Hhewey reacted to Beelzeboss's post in the thread Between 265 & 485 SQ/FT CNCs and Hot Rods, a Sydney Garage with Like.
I started milling the table holes out with a carbide cutter but still it was incredibly noisy so I decided to pre-drill all the holes...
-
Hhewey reacted to kitdoctor's post in the thread Above 1200 Sq/FT The Cow Pasture Garage - Australia with Like.
@Geoff289 gotta agree with that. It's certainly demanding at this stage, when you're not yet ready to start any real landscaping and...