kams1973's latest activity

Finished.

Successfully removed the slides from my sacrificial drawer. Now I need to weld it in the box. I’m thinking I should use some spatter...

Yep, when you're a hammer everything else is a nail... I've had both plugs and patches. All held up fine for the remaining life of the...

I've had about 75 tires since 1986 that I've plugged and never leaked. In fact, I can't ever remember having one leak. So honestly I...

Something else I learned on this project. I needed a long 5mm Allen wrench, longer than the L-key that I had. It turns out that a T25...

I cut them with an angle grinder and replaced them with socket head screws.

Wow!

I have not a single tool from my father, who was a journeyman machine repairman at Ford. Before that he did did plumbing, installed...

Friction slide extraction successfully completed. Maybe next weekend I’ll get the replacement installed.

can't help with your question, but if you're wanting to remove it , I would try hammering on a 6 or 12 point socket, or cut the shaft...

I have one in my gasket collection if you want it.

Run it first. If all goes well, leave it be.

I recently bought a 1979 KRA-59C box locally. Long story short, I advised a young single mother not to take less than her asking price...

These Cornwell wrenches are legit.

Calling it done !