Recent content by ktm010

Location is the northeast. The driveway currently is not paved so stones are constantly brought in on the tires. So it's held up great, except for the tire stains. The other pic shows the floor still has some shine with no special care.

After three years of use I have had some issues. Lots of yellow tire marks from a 6000 lbs tractor. But I did not put a clear coat on ,went with 3 coats of gray instead. Have had some deep scratches from stones stuck to the bottom of a pallet of firewood, dropping metal pieces on the floor. I...

So far good, lots of compliments on the stone.

PMUpdate on garage, installed "Baldhead" cabinets with a stainless counter top. Also a sink cabinet from "Baldhead". Very happy with the cabinets, had to save up but worth it.

Only the first time the truck and tractor was parked, both spent several days parked before being moved. I have not seen any since then.

I have 6 qts of the grey pigment for anyone interested just pay shipping

I'am no expert, but the thicker the coating I think the more it might blend in imperfections but they won't go away. I do see some small gouges that I missed when filling spots with the crack filler that I could have touched up. The soft skid helps also by taking that pure shiny surface and...

Yes, corners and edges with a brush. My daughter did that, but was way ahead of me so that tacked up before I got there with the roller. I can't see why you couldn't do that first by yourself. No problem with it drying to fast and my floor was heated to 70 degrees. You could walk on mine later...

Finally put down a floor coating "Legacy Industrial Nohr-S" Posted more details in floor section. Next paint the walls :)

Approximately $2,400 but I have 6 grey pigments I never used @ 19 each leftover. Only time will tell if it was worth the extra coin.

Yes, very strong. But all products would have some type of compromise. This is one part no mixing to make a mistake on, but pigment needs to be mixed in. No pot life to worry about when putting it down. From what I read, it ends up thinner, even with three coats. Supposed to be a tough product...

Put down two coats of Nohr-S , wanted a light grey so used less medium grey pigment and added a white pigment for a perfect color. Third coat added the soft skid for slip resistance, as I will be washing vehicles in there often. The coating went down nice, hardest part was mixing in the...

Finally decided to go with the Legacy Industrial Nohr -S mainly for the ease of use, because I would mainly be by myself. The saw cuts where filled with sand and then the gel crack filler. The floor was ground with a HD diamabrush unit done with water to keep the dust down. Then the floor was...

I would guess at 35ish. The wood heat works great, the 1000 gallon tank is a storage tank for the hot water.

Today finally finished putting up the last piece of T-11. Next will be decide on the floor coating, before I paint just in case I need to make a mess prepping.Then I can paint the walls.