Recent content by markeric

My bad, it might not seem like it, but I actually did do some searching before I posted. Ironically, I found that video last week, but never noticed he had Tee'd into the original line. Feeling dumb now, but thanks for taking the time to set me straight

Nobody else has done this here?

Yea, essentially the distribution manifold I have would act as a T. I'm just a complete newb with hydraulics and any side effects of doing this, other than making sure any fittings/hoses/valves are rated for high pressure

Guys, Wanted to see if any of you have upgraded / integrated an Air over Hydraulic pump where you have retained use of the original manually operated pump? Merits of doing so. or not, and how? I have an OTC 4020, foot treadle pump I will be integrating, or using to replace manual pump. I...

Thanks, good feedback

The mechanical condition as far as functionality, is awesome. Cosmetics are bothering me more than anything

Correct, this box, and the other one I own which was off the truck...both have the bearing slides. The box is excessively heavy

I think recoup of $500 is possible, my real preference is something like the KR-661 with the taller, single drawer across the top. I've moved to vertical socket storage and the shallow top drawers are a pain. But I do need the space regardless

hey guys, Have an opportunity to grab a KR-660, price is $500, and Im throwing him $50 for delivery. There is some minor rust along the bottom edge, heavy oxidation on the front, lower right hand side on the 2 bottom drawers, and some minor dings. The appeal is I have a matching KR-*** 36"...

This is a 105-N I just picked up. Date stamp 676. T-jaws

I checked my email, I ordered mine February/March 2020

I know this is an old thread, but thought I would chime in. I bought 8 sets of Williams USA socket a year or two back. 3/8 SAE and Metric and 1/4 SAE and metric, shallow and deeps of each. The sockets I got must have been in between production runs, because half the sockets had stampings with...

If you plan on or are required to get a permit for that building, local code will dictate what is required. I built a 12x16 and got a permit, and the county required me to use J-bolts through the sill plate set in concrete, similar to code for single family dwelling

Thanks Wylie. The EMT is not coming directly from the main panel (100A sub). The panel and a 20A breaker feeds a grounded 4" box via 12/2 romex and the THHN transitions from that 4" box downtream to the wall behind where the disconnect will be. I was unaware of the rules on upsizing and...