Recent content by minerfarmer

Do yours have a channel type seal that goes up about 1 1/2 inch on inside and outside of door?

3/4 drop sounds like a good idea but too late for me now, also glad to hear that I am not the only one with this problem. Maybe someone here can help us figure it out.

More pictures. Put a level on it and bubble bottoms out away from garage. I even installed a threashold seal that glues to concrete. Doors are on east side and only leak with rain out of the east against doors. Rain just comes in at end of seals.

This is less than 1/2 inch rain!

More pictures.

Anyone deal with these people? Put up a pole barn about 4 years ago. Doors have leaked since installed. Long story short after several visits and nothing fixed I called Haas and rep said she would supply new seals. Midwest showed up spent less then 10 min. Installing new seals. Handed me a bill...

Forget to mention I do not use floor heat. Went with a mini split and am very happy with it so far after two winters.

Sorry I don't have a better picture. Right or wrong what I did was did a trench with a tile spade between every post and attach 2 inch foam down 16 inches to inside of base board at top height of concrete to be poured later. They actually used the top of the foam to level off the concrete.

Any one have any idea why I can't get this to read tire pressure? I took it all apart and cleaned it. Spring in gauge moves free when apart but will not read pressure.

Unless someone tells me it won't work I am going to build a filter box.

The filters in my unit don't really seem much like filters. More like plastic screens. They can be washed and used over and over. When I cleaned the unit yesterday there was way to much dust on the coils.

I would not block the outlet at all. 4 filters on the intake would be overkill but I want to do everything possible to not restrict the intake. I thought if it is possible to do this someone on this wonderfully informative site had already done it.

20X36 shop with woodworking tools. Would not call myself a woodworker but I can make a lot of dust. The filters on the unit are not enough to keep fine dust out of the unit. Sorry picture did not turn out very good. It is a Mitsubitzi MSZGE18NA. I run dust collection on machines that I can, and...

Thinking about making a filter box for the indoor unit of my mini split. I would like to use four 16X20 Merv 8 pleated filters. Two on top and two in front on an angle. Do you think this will restrict the intake too much? Has anybody done something like this?

Not my idea. I think I saw it on this site. Built out of 3/4 inch plywood and customized for the tools I had.