Recent content by Payne

I finally found my pictures, I knew I’ll took some. Unfortunately, it won’t allow me to post the picture regarding the up/down switch wiring. Hopefully this will help someone down the road..Thank you everyone for your help!

My issue isn’t hooking up the motor to 220. The issue is connecting the up/down switch to the motor. I have searched everywhere and have been unable to locate these specific schematics.

How would I wire the switch? What size wire do I use? It’s obviously a much smaller wire, due to the small opening leading to the switch. Thank you!

Start from the closest to the pump. Open bleeder until oil begins to come out & close. Then move to furthest & follow same procedure.

I have the wires marked. My issue isn’t so much the 220 wiring. My issue is wiring the up/down switch. When I start the lift, in rises directly to the top & wants to continue. I need to wire the switch to control the movement.

I apologize, I apparently posted pictures in a dm. I have the wires marked. My problem isn’t necessarily connecting the power source, it’s connecting the up/down switch.. I really appreciate your help! When I turn the lift on, it rises to the top & want’s to keep going. I need to connect the...

I have a Weaver AFH72 that I took apart several years ago to restore & just got around to putting it back together. Unfortunately, I threw away the old wiring and can’t remember how I had it wired! There are only 3 wires to connect, a black, green & white. There are also two black wires conn...

I have a Weaver AFH72 that I took apart several years ago to restore & ju got around to pitting it back together. Unfortunately, I threw away the old wiring and can’t remember how I had it wired! There are only 3 wires to connect, a black, green & white. There are also two black wires conn...