Wiring help desperately needed! Weaver AFH-72

[Payne]

I have a Weaver AFH72 that I took apart several years ago to restore & just got around to putting it back together. Unfortunately, I threw away the old wiring and can’t remember how I had it wired! There are only 3 wires to connect, a black, green & white. There are also two black wires conn together separately, to place motor in high position. I replaced the up & down switch and don’t know how to connect it to the power box. There are 3 screws in the switch. I’ve spent hour/days trying to research this & can’t find any information online. Would some with a similar lift please take a couple pictures of the inside of your power box and the inside of the the switch & send them to me? It would be a lifesaver! I’m in desperate need of my lift to repair my wife’s car..

 

[Payne]

I have the wires marked. My issue isn’t so much the 220 wiring. My issue is wiring the up/down switch. When I start the lift, in rises directly to the top & wants to continue. I need to wire the switch to control the movement.

 

[Payne]

I finally found my pictures, I knew I’ll took some. Unfortunately, it won’t allow me to post the picture regarding the up/down switch wiring. Hopefully this will help someone down the road..Thank you everyone for your help!

 

[egdede]

Thanks for following up. I'd like to think that ventually someone would have helped you : )