Recent content by Saw

Great, glad you found a close to what you were looking for. Just proves it never hurts to ask and you had someone there with knowledge. I was going to mention interior fire doors, center filled with gypsum might work, not sure if they would have condensation issue.

I worked for a major window manufacturer a few years back as a maintenance carpenter, built many shadow boards for their work stations. Used plywood, boards, metal, Lexan, plyron, PVC, and various screws, nails, whatever would work to hold tools, gauges, whatever was needed at each station. I...

Argon gas between the panes, dead air space. Eliminates condensation usually.

+1 Start slow as the PVC may shatter if you push it through to fast.

Red Heads

You could also drop a bench top into a cut out of a sheet of plywood, build a bracket to hold the saw level with the plywood. Add two by fours to perimeter and a few cross braces for stiffness, the added surface will let you focus on the cut versus fighting to keep the sheet on the saw. Add some...

You would be surprised the drop off from your saw to a contractor saw or a down sized cabinet saw. I have a pair of Craftsman Contractor 10" table saws along with two Delta bench top saws. I put a linked belt on the Craftsman saws, removed the belt memory issue, well worth the money IMO. I use...

Masonite and vinyl are both temporary siding IMO. T111, rough sawn siding might be an option, overlap the Celotex board to create a stronger wall.

Freddy Kruger was a pretty good CREEPER!

Buy and resale.

I would place two by fours inside the plywood and try to keep as much of the truss in place as you can. Triangles are strong, keep that in mind when modifying the truss.

appears to be a two story gable with shed roofs front and back. I don't believe it has open floor space on the ground level.

Length X Width X Depth X .0031 Length in feet X Width in feet X Depth in inches X .0031 = Yards of product. I use this to figure concrete slabs, footers, walls, etc. Works well for me, just remember to get the measurements right and depth in inches right.

Roof x2

Welcome and enjoy your purchases, it is addictive and legal!