Snip's's latest activity

Pens ordered...i have a couple small chips to fix myself. Thanks for the tip

I'm going to try that. ^^^

Today in my garage... Cleaned the MINI today and applied Opti Seal to the paint and plastic trim... I had a few paint chips on the...

DP#152 - Part 6.4, Installing the Column I pulled the lock shoe and bolt from the citric acid, rinsed, dried and wire wheeled them...

A big shout-out to @logical. I met up with him at his place this afternoon where he generously gifted me these motors and miscellaneous...

Cut the slots out. Halfway through the first one, the power switch on my stand crapped out. Had to finish with the saw plugged in...

As you probably know, Porsche is pretty good at recycling parts and they will use some parts forward on new models... As an example, if...

Did the poolboy scream?

Mines a 2016 981S... I was able to rotate 360 degrees while still in the cabin... I settled with only doing 180 degrees... The seats...

Yesterday I took my headliner to a local automotive upholstery company I've used in the past... Met with the owner of Tritex Corp. and...

Looks like a second handle / bar was welded onto the head of an adjustable wrench... I see some weld porosity on the head and some...

Last year I noticed the fabric in my Cayman started to delaminate from the headliner structure... This is a common issue that plague the...

Thank you all for your words of support! Some time ago, my family and I went to the neighboring city of Saransk (about 150 km) for the...

I think the "portability" of it will come in handy when it's not convenient to do the soldering work on a table / benchtop...

DP#152 - Part 3, Removing the Chuck from the Spindle I removed the chuck from the spindle. This was one of the more stubborn and...