Recent content by sqft

What do you mean "ghost voltage"? It wasnt a couple of millivolts bouncing around, it was 46 V or so. I was reading elsewhere about "Unbalanced Neutrals". Could this be right? Seems like that would only affect 220 systems. But my knowledge is very basic.

Im in the process of installing a LED track light in an upstairs hallway. The older halogen unit burnt out at the transformer after about 10 years. The ceiling mount has the type of switch where you can control the on/off from both an upstairs and a downstairs wall switch. So, I removed the old...

You need to cut and repour the support area for the lift. I went with a Mohawk A-7, 2 post and love it. It has an 8' post height, overhead crossover, but raises up the standard amount. Their spec for a repour calls for about a 3-4 foot by 10-12 foot (depending on the width you set the lift at)...

Sweet wood hammer handle

Good deal if you need the "Large Wheel" size. The smaller Eastwood is still a lot more than ebay's.

Ok, I bought a ebay roller. Looks fine, works fine. I can see no difference in the rollers or the way the frame is made compaired to the Eastwood for 2x the price. Im happy.

Yes, thats about what I did for my Mohawk install. But it was 18" thick, rebar, and keyed. Probably way overkill, but I feel pretty safe when Im under a big car. I would not go with less than spec, what ever you do.

Thats what it looks like. The only difference I can see in the pics is maybe different knob hardware.

No one has bought an ebay roller?

I went through the same dilemma with my lift install. I dont know why its such an issue with installers, but 2 of three said they couldnt do it. The third did it without any issue. I think he used a larger radius bend. That Liftmaster model is what I have and I never thought I would say I love a...

I have a project that requires a fender roller. The Eastwood roller seems to be the de facto top end roller. But flea bay has rollers that look exactly the same for 1/3 the price. I might use this for 3-4 projects. Has anyone bought the flea bay generic rollers? Any feedback? I know you get what...

I dont see how you can make the door any higher than the bottom of the beam.

If it is an impact socket set, how can it not be for power tools? What other impact tool is there besides a hammer? Sounds like lawyers doing the BS they do.

I use the laser pointer like in the link above. Works great. Just aim it at a convenient spot on the dash. Perfect every time.

If you park in the same spot all the time hot tires will eventualy lift small patches of the epoxy. Park on some sort of pad if you can.