Recent content by sricke66

  1. S

    Any Real World Success Stories With BallistiX?

    I have T2 on a 6 month old floor. My installer wants to remove the topcoat of T2 and do it again. If we do this is there anyway to prevent this from happening again? I was thinking weekly steam cleaning, or is there simply a better topcoat to use? This is just from driving in and out of the...
  2. S

    Epoxy floor "yellowing" in spots

    I had the same issue on my floor. Nobody ever figured it out.... My floor was a neogard brand tan epoxy floor like yours. With urethane top coat. My spots were brown and random about 10 of them. Mine happened at 4 months. My installer and the company had no ideas. My installer repaired the...
  3. S

    Neogard Floor Issue

    No there was nothing there before. I know it looks like water to me to.
  4. S

    Neogard Floor Issue

    I don't know vapor barrier was installed. The moisture test was done. I don't have a diesel fuel in there, or anything that runs on diesel for that matter. There were no stains of any kind on the floor when did this. Wasn't perfect condition. I don't see it being oil or any other chemical...
  5. S

    Neogard Floor Issue

    I do but she is not allowed in the garage. Apparently mustard and urine are bad for this floor.
  6. S

    Neogard Floor Issue

    I live in sw Florida. In February a local contractor installed a Neogard epoxy product. 70714-3 (tan) base coat with a 70805/7952 top coat with glass beads for traction, with a light broadcast of tan, black, and white chips. About a month ago I noticed random discolored brownish spots of...
  7. S

    Rust-Oleum Extreme Concrete Restore any Opinions?

    I have the 10 times restore on a 10 x 10 outside patio. It's been on for two months i'm getting ready to grind it off. Just rolling a grill over it or laying on a chaise lounge has damage the surface. And because of the roller used to apply it, it creates hard little bumps that are not...
  8. S

    Pool Deck In Florida

    Is there an epoxy that can be used on a pool deck? The top coat and base coats would need to be 100% UV stable as it would get a lot of sun. And as far as traction is there anti skid additives that would work to make it safe for a pool deck? I would like to do this on my lanai (patio) and pool...
  9. S

    Paint, 1 Part Epoxy, or 2 Part Epoxy

    Thanks Shea!
  10. S

    Paint, 1 Part Epoxy, or 2 Part Epoxy

    Thanks Shea, I have already read this article. While a nice read, it did not answer any of my questions which is why I posted them here. I have read many things on your site, but nothing really answer my questions about touching up any given product, or changing colors if I choose to.
  11. S

    Paint, 1 Part Epoxy, or 2 Part Epoxy

    Hello, Newbie here..... I live in south Florida and am about to close on a new spec home. I have a poured floor about 5 months old. I want to color the floor. It won't be much of a shop or anything just a place to park cars, hold lawn stuff, and do some light tinkering(making things worse that...
Top Bottom