Recent content by texastaco11

I have the graco truecoat 360 vsp, the one with the variable speed and plug in cord. I’m pretty happy with it. I used it to paint some cabinets for my laundry room recently. Used a medium mesh strainer sprayed primer and Sherwin Williams urethane enamel. Then I sprayed the inside of my shed with...

Sorry I should have clarified, I cut the suggested hole directly behind the unit and ran the drain line down in the stud cavity then out the lower part of the exterior wall and out of the garage. Meanwhile the compressor lines go out and up then to the rear of the 3rd bay of the garage. The...

I just installed the diy 24k unit and ran the line set up into my attic and then the drain line down and out of the exterior wall it was mounted on. Sorry I should have clarified, I cut the suggested hole directly behind the unit and ran the drain line down in the stud cavity then out the...

The drawers and casters are very smooth so I’m pretty happy with it. I wish I could have floated and wall mounted it as that was the original plan for all of the cabinets but not too much of an issue. Sent from my iPhone using The Garage Journal mobile app

Received my order from Costco yesterday, marked my studs, leveled the feet and got them mounted! Sent from my iPhone using The Garage Journal mobile app

Pretty good, I haven’t really done much in the garage. I do basic diy projects, oil changes and exercise in the garage so I expect the floor to handle it well. Sent from my iPhone using The Garage Journal mobile app

One coat of the epoxy 2 part gray primer, I think I ended up getting 3 color coats and 2 clear coats with the 550-625 sq ft kit. My garage is about 580sq ft.

I also did the simple gray. downside is you can see my roll marks, but I'm very happy with the results regardless. I mixed 3 gallons of nohr-s and 3 pints of pigment into a 5 gal bucket, then poured them back into the single gallons. I couldn't get all of the nohr out of the gallon...

Thank you, and yes the logo is for my station, 36. We're right on IH35 so hence the checkered flag, we make a lot of runs up and down the highway. also thank you all for the compliments. hopefully I get a bigger garage one of these days!

Just a heads up, the San Marcos store where I saw these only had 1 left today.

I've been inspired by all of your garages so I just want to share my journey with all of you. Dubbed the Tacoma Hut for my current vehicle. I'm a first time homeowner in Central Texas, and my garage is about 20'x17' with an additional ~3' bump at the front. Supposedly a 2 car garage, it is a...

My store had these reels at that price point around 2 weeks ago. So they may drop down if they don't pick up in sales.

Zillareel 50' 14/3, 15 Amp cord reel marked down to $29.99 at sam's club in San marcos tx.

Picked up 2 of the ryobi 2 packs around noon today on the southside! They also adjusted the price of the 2 pack I purchased last week for $50. Glad to hear you scored! :rocker:

Maybe too wide but the depth might be what you're looking for. http://www.harborfreight.com/hanging-tool-cabinet-39213.html