z28tt's latest activity

mine has been in use (auto maint/repair, metal fab; 10 hrs/week on average) for about five years now. I have left spills on it for days...

I believe wood can be bolted to the inner vertical part of the I-beam and then it’s back to wood framing

I have the Rotary SPOA10RA. My track car was low and the lift pads barely cleared the frame. I bought that model specifically to clear...

Thanks guys - That's good input. I've been reaching out to surveyors to define our property line, and find out how far we can build...

Third post for second lift mod. I made a gantry beam for over 10' of lift clearance. It sits on the top of the lift carriages. I store...

Max lift height takes risers into account, so doesn’t do you much good if you need to lift a car without them. “Rise height” is highest...

I'd like to take a moment to say Thank You to Rock! I shamelessly copied his design and produced my own set of these. Mine are not...

I recently installed a car lift in my garage and, besides the conventional way a lifting a car, I wanted to come up with an easy method...

I'm looking to get a tall two post (I'm 6'3"), but seems like lots of the companies spec max rise using their tallest lift blocks...

You say you want symmetric. Don't limit yourself. You might want a bi-symmetric. I just got an asymmetric Tuxedo 11 k, TP-11 KC-DX...

You shared that you are 6 foot 2 and want clearance to not hit your head when walking under. I am 6 foot and my son is 6 foot 4 (17...

@brianpgriset - Can you share the spreadsheet? I'm in the same boat! I've been putting everything on a OneNote page. Rise specs seem to...

When I was shopping I made a table with all the specs for each lift under consideration (around 5 or 6 in total) including things like...

I'm 6'4" and have a Amgo OHX-10H and it has been great for me so far.

My understanding of symmetric vs. assymetric is the placement of the center of mass of the vehicle. On a symmetric lift, the center of...