Plomb tool picture thread - show your stuff!

[Outlawmws]

The Bay Area box is really full. Someone needs to send me a Toolmobile.

I know where there is a 2 drawer PressWeld?

 

[bmwrd0]

Don, I will bring you a toolmobile next time I head down that way. It is starting to get crowded with them here.

 

[Oldtuleguy]

If anyone needs one its don!

 

[Outlawmws]

If anyone needs one its don!

I dunno, I'd guess Roy needs maybe a baker's dozen after that last collection buy...

 

[d42jeep]

This eBay pickup won’t take up much space. It’s a 1/4” drive 4770 universal made in 1941.
-Don

 

[r_olson_06]

I dunno, I'd guess Roy needs maybe a baker's dozen after that last collection buy...

I am still toolmobileless here.

 

[Mintgrun]

My tool mobile has been busy lately. Head gasket fun happening here.





The big wheels are great, with all the uneven surfaces around here.

 

[d42jeep]

Two more dual marked wrenches arrived today from Todd (Twertsy). The well known chrome discoloration common to Plomb wrenches of the period is pronounced on the larger wrench.
8182


8180


-Don

 

[b_fuss]

Found something you all might like to buy. Harry J Epstein tools has quite a few NOS PLOMB. Go to the Closeout section.

 

[Etchase]

A 1/4 WF-8 with war era sockets in an all inverted triangle box. The sockets are too tall for it.

 

[d42jeep]

It seems odd that the sockets are too tall for the box. This one has mostly 1941 tools.
-Don

 

[Etchase]

It seems odd that the sockets are too tall for the box. This one has mostly 1941 tools.
-Don

And you would be correct. My lack of dexterity and a small bend in the latch had me thinking the sockets were hitting. They fit fine. Mystery solved. It was me. Again!

 

[r_olson_06]

Here is an odd one. Here are 2 P series wrenches. They appear to be earlier versions of the O series as they do not have date codes. They do not appear in any catalogs I could find. Anyone seen any of these before or have catalog references? @MR.X ?

 

[Smokeshow69]

Hit up an estate sale up in Washington and scored a handful of good bits! I’m excited to see if servicing the 4951 makes it buttery smooth. I sold my last one in my collection reset recently and regretted it.

 

[Private Lugnutz]

The well known chrome discoloration common to Plomb wrenches of the period

Indeed. And for those for whom those electroplating rack marks may not be so well known and who have not seen the thread dedicated to the subject while perusing the A to Z Index of Threads in the Stickie at the top of the forum...

Plomb Electroplating "Burn Marks"

removed

www.garagejournal.com

 

[Oldtuleguy]

I have one that works. Seems pretty delicate though, not sure what I would use it on.

 

[d42jeep]

After seeing so many broken ones, I view mine as more toys than tools. They work okay but they are fragile.
-Don

 

[Outlawmws]

I have one that works. Seems pretty delicate though, not sure what I would use it on.

I've used mine before.

Of the 3 I have one (the first) was broken (Gear) but a rebuild kit fixed that...

This is the type of tool that gets 4-6 ft cheaters put on the handle...

 

[r_olson_06]

Hit up an estate sale up in Washington and scored a handful of good bits! I’m excited to see if servicing the 4951 makes it buttery smooth. I sold my last one in my collection reset recently and regretted it.

Nice. Is that a WF-126?

 

[Smokeshow69]

Nice. Is that a WF-126?

I can’t remember. I’ll have to check

 

[r_olson_06]

Here are some early Ford pullers.

 

[Snaparxon]

Found this one in a bucket that contained mostly Model A tools and wrenches marked Ford.
Plomb 3140-S 1-1/4" angled wrench, appears to have a date code but need to remove the paint to be sure.

 

[r_olson_06]

Found this one in a bucket that contained mostly Model A tools and wrenches marked Ford.
Plomb 3140-S 1-1/4" angled wrench, appears to have a date code but need to remove the paint to be sure.

That is what the Plomb catalog calls a Hog Jaw wrench. Not easy to come by. I think they had 4 sizes and that is the most common one by what I have seen. Overall a very great find in the wild. I have only ever seen 5 in my years of collecting.

 

[2001ZR2]

This WF-8 marked ratchet with the 9/32" anvil. Came with a couple of Snap On of the sane era and same size.

 

[d42jeep]

One of the Plomb items that came with my Ell handle was this WF-38 1/2” drive ratchet missing a screw and the detent piece and spring. The remaining screw was so damaged that I was forced to drill off the head to get it apart.
Once disassembled, I cleaned it up.

I have spare screws in the Bay Area to get it working again. I have seen a correct size ball bearing used with a spring in place of the missing detent so I may try that. I have a rusty non WF 5449 1940 version of this ratchet so this one may end up being used as a parts donor.
-Don

I decided to pick up a later WF-38 to use as a donor for the handle posted above. When it arrived it was in good enough condition to clean up and put back together.
I probably need to stretch out the springs a little as it isn’t staying in its set position in one direction. Here are the two WF-38 ratchets together.
-Don

 

[d42jeep]

I received this 1” flare nut wrench from Roy in the mail recently.
Along with some other recent finds, a 7318-H chrome 6 point impact socket and an 8 point 1/2” drive 9/16” socket.-Don

 

[r_olson_06]

I decided to pick up a later WF-38 to use as a donor for the handle posted above. When it arrived it was in good enough condition to clean up and put back together.
I probably need to stretch out the springs a little as it isn’t staying in its set position in one direction. Here are the two WF-38 ratchets together.
-Don

There are so many variants for the WF ratchets. I think @RubiconJK posted some of his a while back.

 

[Fred Knox]

My No. 2411 leatherette roll holding the full allotment of ignition/radio/refrigerator wrenches, all forged, and with two different size openings on each wrench - one at 15° and the other at 60° angles.

3210/3211 pair with 13/64” and 15/64” openings
3215/3216 pair with 7/32” and 1/4” openings
3220/3221 pair with 9/32” and 5/16” openings
3225/3226 pair with 11/32” and 3/8” openings

 

[r_olson_06]

My No. 2411 leatherette roll holding the full allotment of ignition/radio/refrigerator wrenches, all forged, and with two different size openings on each wrench - one at 15° and the other at 60° angles.

3210/3211 pair with 13/64” and 15/64” openings
3215/3216 pair with 7/32” and 1/4” openings
3220/3221 pair with 9/32” and 5/16” openings
3225/3226 pair with 11/32” and 3/8” openings

Nice Leatherette set!

 

[oldmantaylor]

The ones with the raised letters were my favorite.

 

[d42jeep]

That roll is really nice!
-Don

 

[3baygarage]

Finally joined the Plomb WF-6 club!

Also, a nice 5265 Plomb Tool Co. Proto dual marked 3/8” breaker bar.

USAAF engraved.

With 9/32 WF-8 ratchet.

 

[r_olson_06]

Finally joined the Plomb WF-6 club!

Also, a nice 5265 Plomb Tool Co. Proto dual marked 3/8” breaker bar.

USAAF engraved.

With 9/32 WF-8 ratchet.

Nice! What's the back story to it? I have been searching for quite a while for one and this is the 1st one I have seen turn up in about 4-5 years.

 

[Snaparxon]

Nice! What's the back story to it? I have been searching for quite a while for one and this is the 1st one I have seen turn up in about 4-5 years.

Check Ebay sold listings on Sept 5. He stole it

 

[3baygarage]

Nice! What's the back story to it? I have been searching for quite a while for one and this is the 1st one I have seen turn up in about 4-5 years.

It’s an Ebay buy. Didn’t realize they haven’t shown up for a bit. I know they’re aren’t out there like their counterparts, that’s for sure.

 

[r_olson_06]

It’s an Ebay buy. Didn’t realize they haven’t shown up for a bit. I know they’re aren’t out there like their counterparts, that’s for sure.

Nice! Congrats! The last ones I seen sell are usually around $100.

 

[bmwrd0]

Nice! I have one, not in nearly as good of shape though...

 

[d42jeep]

This 1141 Plomb DBE arrived from Roy in the mail today. It will be added to the Navy NAF box as it is one shown in the catalog that I didn’t have.
-Don

 

[MR.X]

Funky number on this large early chisel / punch? Long azz extension and a couple other unusual wrenches.