Search results

By the way, those ramps are removable. There is a rod that holds them in. Sent from my iPhone using Tapatalk

I have my ramps almost up to the door as well. Less space in the back of the car but it works. Sent from my iPhone using Tapatalk

Thanks. I saw it done somewhere and thought it was an excellent idea. I have a French drain there so not worried about it pooling up during the summer when COOL is used. Sent from my iPhone using Tapatalk

Here you go, Did 1 side of the linekit cover and will be doing the back another day this week/weekend. Used a 4” set that works out real well. Don’t worry the lineset isn’t resting on the gutter :-p Sent from my iPhone using Tapatalk

This is what I kind of went by for my HD-9. The second picture shows some good guidelines. You essentially have to stand there and mark out the full length of the lift, length-wise and width-wise and pretend a car is there. Sent from my iPhone using Tapatalk

Good eye! :) Sent from my iPhone using Tapatalk

I got a HD-9 in my 21wide by 23long garage and it’s perfect. The ramps start at the beginning of the entrance and there is plenty of space up front. Sent from my iPhone using Tapatalk

Checked in there tonight and it’s a very nice 70 degrees in the garage. Temp on unit/remote is set at 74. It helps that it got up to high 50’s outside today as well. Will see how it is when it gets colder and colder. This should also test my insulation. Sent from my iPhone using Tapatalk

It was a loose wire inside the outside compressor. I think it was some transmitter wire. After we plugged that in it all started working! Now I have a new spare motherboard just in case :) Sent from my iPhone using Tapatalk

Also, As soon as my line sets covers come I will come up with a good way to cover the lines and extend them out where there aren’t many coils, if any. :) Sent from my iPhone using Tapatalk

Had an HVAC guy come over. He found that one of the wires on some transmitter inside the outside compressor wasn’t connected. Plugged that in and it all started working. Now I got heat!! Sent from my iPhone using Tapatalk

Just ordered one of these. Not only is it wide enough to go through 3 studs 16” apart, it looks like it has more space to move the unit further from the wall. Looks VERY sturdy (supports up to 500 lbs). https://www.h-mac.com/quick-sling-qswb4000.html Sent from my iPhone using Tapatalk

Browneye, Tried to search but couldn’t find your thread. Mind linking to it? Sent from my iPhone using Tapatalk

I am on Sunday actually. Will update what they say. Need them to check all the wiring anyway. Not sure what you mean about the line set slope. Sent from my iPhone using Tapatalk

Got this Klutch 5”. Works well. Too big for my little table :) Sent from my iPhone using Tapatalk

Anyone get an E1 error code before? What resolved it? Sent from my iPhone using Tapatalk

Here is a finished pic. Actually having an E1 error code so the place is sending out a new motherboard (pcb). Sent from my iPhone using Tapatalk

I just mounted my 18k condenser on my wooden walls with the MeCool bracket. Just found 2 studs and used 3/8” by 3” lag bolts/screws from Home Depot and then in the other 3 holes used 3/8” by 1.5” lag bolts/screws and it seems to be holding up fine. I had to make new holes where it mounted to the...

Good to hear this as well!!! Sent from my iPhone using Tapatalk

True, will see how it goes. I got high ceilings so it’s not a standard 500sq ft garage. Sent from my iPhone using Tapatalk