Search results

That style of pulley is a joy to use. Easy to assemble and easy to remove and they don’t slip and get loose. The gap is necessary to get a tight fit. note the threaded holes on the flange to jack the bushing apart.

Tare a sawzall blade and make a kerf and slide a hanger into the kerf.

Kinda took the summer off I don’t do well when it gets hot 🙁🙁 too all summer for my friend and myself to get it wired and plumbed. I cal in my guys and got the side walls insulated and the liner panels on the ceiling.

The guys that built my 40’x80’ x16’ tall used a skid loader with a homemade boom pole with a big hook on it made it look really easy.

I am not too worried about assembly of the lift, but thanks for the heads up. I guess my biggest concern now is the weight rating of the lift, I think my one ton dully weighs just under 9,000# I was looking for lift with some safety factor that’s why I was going with a 11,000# one. Really I...

Turn your pins 180* and tack weld tool to gland and it will come apart. When done zip wheel the tacks off and clean it up. It will work.

Thanks for the reply. Did you purchase the 9000# lift or the 11000# one? I have since watched some videos of them and they say the same thing about the directions and hardware. I laid it out on the floor and I think it looks like it will work for what I need.

I am an old guy thinking about a 4 post lift for my new shop. I have a 1 ton dully diesel crew cab that I want to lift a couple of times a year. What’s your thoughts on this lift? https://mygaragesupplies.com/products/katool-kt-4h110-four-post-vehicle-lift-11-000lbs

That’s the way I do it. I take a die grinder and grind the rings out of the couplers of every size and leave them in my box ready to go. I mark the ones I cut out with a sharpie. I have done it many time successfully up to 3”.

Not showing I have a small wash bay in the floor. There Is a water line out in the yard not too far from where I want to put the bib. If I don’t do it this way it might freeze if I don’t keep the main part above freezing. My other option is to run PEX up the 16’ side walls and 40’ across the...

Bib wanted inside, the other side is below grade. I tho about hydraulic cement but I didn’t know how it would react to the copper pipe. I didn’t think about rapping the pipe.

I want to drill and install a residential outdoor hydrant in my retaining wall. Trying to figure out what would be good to seal it from leaking. I have a French drain behind the wall but there is still water Present.

Do the harbor freight reels work good? I have always been Leary of them, don’t know why. for 40 years I have been tripping over air hoses I am starting from scratch finishing the interior of my new shop. Thinking about getting a couple if they review good. 😊

I stopped in 2 or 3 year ago and had a nice visit with him. They received I don’t know how many thousands of the last USA production Cresent wrenches before they moved to China. The basement was full of cases of NOS USA wrenches. He told me they cut a fat hog when Diamond sold all of there USA...

That’s kinda what I wanted to know, I have a big roll of 2 wire bell wire I will just run two runs of it and it will be plenty.

I am wiring my new shop, 40’x60’x 16 tall. Doing R19 batts in the walls and Blow insulation in the ceiling. I am trying to get everything roughed in before the insulation and liner pane go up. I am thinking infrared heater is what I am going with. I already got the gas line ran, I know I need...

I’m in the same position looking for a 4 post lift for my diesel Silverado 3500 cc long bed. any thoughts on one of these? https://www.ebay.com/itm/385279383915?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=xtgzuvpnqq2&sssrc=4429486&ssuid=S4d_0YQzT7G&var=&widget_ver=artemis&media=COPY...

I finally got around to getting a picture of my floor drain. I need to space them and weld a ******** the bottom to keep them in line

More photos. Very well built just not too practical in my opinion. I think ultimately it needs to find another home.

I had the same problem when I moved from Kansas. There my main shop was 4800 square foo, I thought I. Could find something like that where I wanted to be, no dice nothing even close to what I wanted. Seen a couple listed as huge shop 30x50x10’ sidewall’s and it even has electricity!!!🙁🙁