Search results

I would like to be able to shut the tank valve off with a switch when i leave the shop for the night. Has anyone done anything like this or have suggestions on what to buy? It is a 80 gal hoirzontal compressor located on top of bathroom (manual valve is out of reach). Outlet size is 3/4 pipe

My garage door openers do not have provisions and do not have lights that come on when the doors are opened. I want to use a occupancy sensor to turn on one seperate light when I open my garage door and drive in. Sounds simple enough, but i would also like to find one that does not trigger on...

Looking at the T8 4 bulb 8 foot Metalx fixtures at menards. What do I want? They list two similar lights 8TSNF232 and the other is the same but with an R at he end of the model number. Is the R reprsenting a "residential" ballast and the other maybe commercial? And also, are these Metalux...

Tring to decide if i want to hook up the floor heat or go with a diffrent option. I am wondering about heat loss from my slab mainly at the garage doors. It is a 38X52 with 9 loops of 1/2" pex each a litle over 200ft in lenght. Would be using a modulating electric boiler. Foundation walls were...

I have a 38 x 52 stick frame bulding that is just geting finished. 2x6 wall construction with pro-rib metal on the outside walls and roof, soffit vent with a ridge vent. It has radiant floor heat & 2" closed cell spray foam on the walls. Interior of bulding is also going to be lined with metal...

Just starting on a 38 x52 garage. The perimeter stem wall was made with 2" styrofoam forms. (2 inch foam 8 inches concrete and 2" foam) set down on a footer. The stem wall will extend 16" above the finished floor. I am putting pex in the floor and probably going to use spray foam on the walls...