Search results

ok so i want to switch to synthetic compressor oil which one do you guys recomend and ware is the best place to order it? ive been mainly looking at amsoil and the royal purple compressor oil so if anybody knows ware to get that cheap or has a different brand they recomend let me know.

alright well i picked up a used speedaire compressor with new motor and pressure switch its a made in usa compressor its a 80 gallon 2 stage with a 5 horse motor. anyway the problem is i got it wired up and it runs and pumps awesome but on the pressure switch there is a small lever that when it...

Alright so I'm in the market for a good used air compressor. The problem is I'm running into some people who can't set them up and run them for me before I buy. So I was just wondering if anybody can tell me a good way to determine if it's gonna work or not without putting power to it? Just so...

well like it says im looking for a air compressor in nj im in vineland area. im looking for a vertical setup 60 gal or bigger, needs to be a 220 setup atleast 12cfm depending on price. ofcourse if somebody has a higher unit or 2 stage unit i can come up with more money so let me know what you have.

Ok well I need a pre easy read matco 1/2" drive 6 point deep 15, 18, and 22 mm impact sockets if anyone has these let me know. Thanks

well ive been expanding my tools alot lately and i need some new mics anyway ive always looked at starret before but this seems like a realy good deal. i just havent got to use the fowler mics first hand so i was hoping to get some opinions? also does anybody know ware there made?:beer...

So I baught a mismatched set of impacts that has a snap on 18 and 19 that I would like to trade for the older style matco pre easy read sizes. I would also like to trade a mac USA 15 for the same style matco 15. anyway they are deep 6 point impacts let me know if anybody has those three sockets...

Hi I have a mac 60 th anniversary 50" top and bottom box. It's in realy good shape except the guy I got it from took all the chrome drawer pulls off for some reason, mac wants almost $300 just to replace them wich seems kinda high to me so I wanted to know if any of you have come up with a good...

ok so i know there are a bunch of these type of threads but i cant find a whole lot of info on the autoxray7000. so basicaly im wondering if anyone has used one and if it is as good as it sounds? also if anybody know when they are going to release the other sd upgrades for it? anyway thanks in...

Like it says I need a snap on 10 mm 7mm and 6mm chrome socket 6pt shallow 3/8 drive old style if anybody has one let me know asap and how much to ship to me and I'll paypal u I also need sk long 5/16 and 11/32 wrenches if anybody has this stuff

ok so heres the ad- Up for sale is my Sears Craftsman 6hp 60gal 220 volt vertical tank air compressor. It runs great and has no problems. The compressor section has been newly rebuilt with new seals, a new rod/piston assembly with cylinder for one cylinder and new seals/rings for the other. It...

Ok so at the moment I have a Murray breaker box in my house and some kind of unknown gauge wire run to my shop off a 20amp breaker and that goes strait into my shop into an outlet and my light switch with no breaker box or anything. I also have 6awg wire run underground to my shop not connected...

help me pick a new welder Ok so I'm in the market for a new welder. I'm not new to welding at all but I haven't been able to use the 211. I'm wondering if I will outgrow it at home because I don't realy wanna have to buy another mig welder so I'm looking for opinions. My uses at home I do alot...

Ok so I just baught a Mac 60th anniversary 50" double bay top and bottom box and for whatever reason it doesn't have the chrome peices that go over the drawer handles to protect them and I was hoping somebody could order me some I am more in the industrial side of wrenching and don't have a Mac...

Like it says IM looking for a used matco 3/8 either 60 or 88 tooth bent handle ratchet let me know what u have and what u want for it thanks Alan

Hi I have a snap on f752b bent black hard handle, it's been used and has some scratches but works well and isn't abused. I want a newer matco bent handle either 60 tooth that I can upgrade or a already upgraded one preferably with a all metal handle no comfort grip anyway let me know what you...

This might supposed to go in classifieds but I mostly just wanna know what it's worth anyway I have a snap on f752b it's a 3/8 bent hardhandle IM not sure what it's worth so just wondering cuz im wanting a matco bent handle instead so IM hopeing this will get me the same as a used matco bent...

Hi I'm looking a good used box can be craftsman or whatever brand but I am broke looking in 2-3 hundred doller range I have out grown my old Waterloo to the point that all the drawers have actualy callapsed I know somebodys gotta have one of those big old craftsman or whatever brand that they...

Hi I have a Honda chopper bassed of off a 82 Honda magna it is raked out int the front bobber style rearend no fender single seater it is black and blue with a silver frame runs and rides great all it needs is a battery and I never took it and got a special construction title for it u can either...

Hey ya so I just got a craftsman 18 volt drill driver and saw kit I already have a nice circ saw and don't need a cordless one and I know some of the kits come with a big flashlight that runs on the same batt so I was hoping somebody would trade me the light for my saw we can trade cases if u...