Search results

I came across a gentleman who was a mechanic to repair the Komet Knitting machine as well as some Socks Machines. These were some of the tools he used to repair the machines… he let me take a picture of the manual but would only sell me the tools. He still wanted to keep the book.

There are 3 different indentations so I’m guessing that this tool is to install different sized seals… any other ideas? It looks like it’s for installing valve seat inserts. Thanks go out to Humber2 & Provincial for figuring it out.

Thanks to Ed, we now know that this tool is a 1928-34 Ford A&B Valve Guide Tool

I couldn’t find a listing for piston ring groove cleaners as well a post for all power mfg. so I’m making a post. It’s pretty shiny and it says it’s the deluxe model…

I tried searching but didn’t have any luck so I’m starting this thread. I have a couple different quart bottles, one pint bottle and this one that I believe is smaller than a pint. See pictures attached. I’m thinking the one that is smaller than the pint bottle is older than the rest but I...

I bought this box thinking it had something to do with valves for vehicles. It turns out it’s for….. plumbing valves… hah hah. Jokes on me. It still is a vintage set, just not for a vehicle, unless you want to repair the taps in an RV…

I picked up a Hinsdale pressed steel socket set and found 2 Larson pressed steel sockets in the mix (bottom two on the left in the box). It made me wonder if it came that way originally or had two replaced with Larson when the Hinsdale gave out…. Sizes 31/32 and 1 inch.

Hi All: I found this beauty… I’m trying to decipher the manufacturer name… it looks like something and call h & t co. Maybe someone here knows. Thanks, Harry

Hi Everyone: I thought this was a unique idea… as you straighten the handle it moves the jaw tighter onto the nut. Right now the jaw is seized but I’m working on freeing it up. Has anyone else seen something like this style of tool?

Does anyone recognize this trademark? I know of the Walden-Worcester and the Frank Mossberg but I don’t recognize this one… thanks, Harry

#1. Tee handle 1/2” drive wrench with looks like N/N stamped on it #2. Small Adjustable wrench no visible markings about 6” long. #3. Originally I thought it might be a Frank Mossberg pressed steel socket but can’t find any markings… #4. Some kind of pressed steel socket allowing you to use a...

Good Afternoon Everyone: I came across this set yesterday. It says 32 pieces but there’s only 28. I’m guessing it’s from the 1960’s but I’m not too sure as I can’t find any information on them on the internet. They are in Metric sizes instead of Inch sizes which makes me wonder if it might be...

1st Time I came across one of these sets. Comes in it’s own case. Internet says they are trammel heads. Not sure how it works but I thought it was pretty Kewl so I bought it… Maybe some one else here has one as well. Harry

Hi Everyone: just found this wrench. Comes in a leather case with different dies that fit in the opposite end as well as a 1/4” socket adapter. I thought it was a pretty special tool… I also found a site that has 8 pictures of ads for this tool. Free download which I thought was neat too. What...

Hi All: I just acquired an E1-24 and an E1-36 Superector Ratchets by J.H. Williams & Co. Also a 2” Williams Hex Wrench. The E1-24 has a 1” Female socket and the E1-36 has a 1 1/2 Hex socket with a 1/ 1/2 Gray socket welded onto it. I may try to separate the 2 pieces. Super heavy duty tools...

I Found this as well. I thought is was pretty Kewl as there is a spot to put your ratchet on the end of the handle… that’s a pretty good idea. I’m not sure if other companies have done this as well as it’s the first one I’ve seen.

Hi All: My latest acquisition. A Hoppe Super 933N 1/2” Drive Socket Set. Missing the 1/2”. 12 point, replaced with a Snap On 6 point. As well there is an additional 11/32 Snap On 12 point in the case, a deep 7/8 Challenger, and a deep craftsman. It is also missing the extension. Looks to be in...

I’m curious if anyone knows what this is/does? I’m guessing it’s some kind of tool for a machinist… Thanks, Harry

Hi All: I came across this plier today. I didn’t know what they were but managed to find them on the internet while searching. Another addition to my tool collection. Anyone else ever seen these before?

Morning All: I came across this set on the weekend all in a little SK metal box… Nine 1/4 drive sk sockets…. 2 40908 1/4”, 1 40909 9/32”, 1 40910 5/16”, 1 40912 3/8, 1 40914 7/16, 1 40988 1/4” square, 1 40900 5/16” square and 1 40901 3/8” square… 0ne Bonney 1/4 drive socket… 11/32” v11, Two...