Search results

I'm looking for a good place to buy a 10kw electric boiler. What's a good brand and place to go for a good price. Thanks in advance.

Finally got my 44" enlargement!

I'm sorry if this has been asked before and I know there are many topics about this toolbox, way too many to weed through to find the answer. Where is the 44" toolbox made? Reason I ask is I live in Canada and to go down for the day to pick this up I could potentially be charged an extra tax...

I have a Vanee 90H HRV. When I plug it in it goes through the boot sequence and then flashes amber telling me it's a damper problem. I run it through the boot with the door off and magnet over the magnetic door switch. The damper is working fine. The problem I see is the actuator doesn't want to...

Has anyone here installed one? Are they any good?

A little background story, we moved from the city to a rural lot about 6 years ago. Last November we moved about 4 miles down the road to a newer house. I've always had a garage/shop and this house didn't have anything. Not even a shed! Needless to say I needed one and so the build starts. It...

I'm building a 26x48 shop which is 1248sq'. I bought 4 rolls of 300' pex and finished laying it out tonight. Looks like I'm going to be short about 150'. After reading on here I know that all loops need to be close to the same length. I don't even know what to do now. Do I change the layout to...

So I'm just in the process of running my electrical out to my formed pad. All I have right now is the gravel and want to get the electrical buttoned up so I can move forward with the pour. The previous owner had buried a wire that was used for an RV plug. This is hooked up to a 50A breaker in...

Well I have a couple questions. First one is do I include the insulation into the form or do I just put it up to the concrete after the pour and backfill around it? What's the best way? Second question is would OSB be sufficient for making the form if supported properly?

So does anyone think I need a drain in my shop when I'm putting in-floor heat? Someone told me I don't need them unless I plan on washing vehicles in there which I don't. Pros and cons?

Is this alright to use or do I need NP75? What's the difference?

I am just wondering what is the most common roof pitch. I am planning on building a 30x40 shop with 10' ceilings and I can't be over 15' at the peak otherwise I need to pull another variance. I can't remember what the most common pitch is.

Hi, I did a search and after many hours of reading through some interesting threads I didn't find my answer. Many of you have used infloor heat in your shops which I intend to as well. Has anyone ever used a heating element for a hot water tank as your heat source? I know people use the whole...

I am building a 40 x 30 shop this summer. I have been looking around at many different threads to get ideas. I keep coming across post and beam constructed shops. This might be the way to go for me as then I could pour the concrete the following summer. I don't know anything about post and beam...

Hi, I was looking for info on building a shop and came across this forum. From what I've seen so far there sure is a ton of info here. I'm really happy I found it so I can get some different ideas about my shop. I'm planning on building a 40 x 30 x 10 shop this summer. Size might possibly get...