Search results

I've got two items up for sale today... Wright Tool 408 1/2" drive std sae impact socket set. IMO Wright rivals Snap-on in quality, especially when it comes to impact sockets. This set is brand new. There is slight wear on the rear of one socket, because I was playing with it on a new impact...

First up I have a Kobalt Composite 1/2" Impact wrench. It was given to me by a friend as repayment for a favor. He bought it new, and used it several times on a deck project, and then stored it. I googled the model number, and it appears that it once sold around $100, and was rated at 525lb. I...

Like new Snap-on ratchets SHLF80 & FHNF100, Gearwrench 32pc. set, Priced to sell ASAP I need to move these as quickly as possible, I dropped my phone off the ladder whilst hanging christmas lights yesterday, and just had to dip into my christmas fund to purchase a new one. I had planned on...

http://www.amazon.com/dp/B00279T6VQ/?tag=atomicindus08-20 Pretty hard to argue with a USA made, premium impact socket set for this price. Some (myself included) feel that Wright is on par with Snap-on. Edit: This is a 1/2" drive set, 7/16 to 13/16

All prices are OBO, I'm willing to give combo discounts. Prices include shipping. SGDTX90BR Instinct Soft handle Torx driver set, T8 through T45. This is a superb set, but I just don't run into enough Torx to truly justify it. The thing (IMO) that makes these particularly nice, is the hex...

I just picked up an HF grinder after work today, and I didn't do great, but it did solve an immediate need. My old grinder died, and I needed something cheap and effective to last me for however long it takes me to procure a high quality unit. It's the 6" grinder w/lamp, item #37822. It came...

EDIT: Looks like the pump is a CH VT2030, dunno if that is a good thing or a bad thing. I just snagged this on CL earlier today, it is by far my best catch so far there. I have serious need of a compressor, but I'm also on a serious budget at the moment. I was seriously in the territory of...

A few months back, I purchased a new Snap-on master bit set to replace the one that I lost when all my tools were stolen years ago. I've always liked the Snap-on bits since they were made by Zephyr, and I have used Zephyr bits for many years. SO was a great supplier for them, as they can be a...

I tried selling these here before, I'm going to give it one last shot before I go to ebay with them. Basically I've got a BNIB yellow striking prybar set, and a BNIB yellow ratcheting screwdriver. I'd like to get $180 shipped for the set. I'm willing to split only if I have solid buyers for...

I've got a few Snap-on items, some of these were an impulse purchase, some duplicates, but the fact of the matter is I just can't justify the cost right now. First up I have a 7pc 6pt deep 3/8" drive set, 3/8" to 3/4". I'd like to get $65 shipped w/o tray, or $70 shipped w/tray. Sockets are...

Last week I found out that I no longer had a job (for the time being, or possibly permanently). Evidently someone up high forgot to fund something, and quite a few of us got sent home until further notice. I've spent the last week or so in self-pity, and just realized that I have bills to pay. I...

I just bought a lot that had these items, I already have them and I don't need doubles. The rails are not included with the socket sets, but I can supply the sockets on generic rails (HF rails which have been cut to size) upon request. T72 Ratchet, some use but like new condition, $45 shipped...

I just finished putting a down payment on my first Snap-on tool box, and one of the main deciding factors (besides the fact that the dealer just happened to have the box I'd expressed interest in, magically show up in my favorite color on his truck :D), was that it was a USA made rollaway. I...

The Gerstner chest is a GI-530, it's the Gerstner international series, so they're imported, but are still VERY good quality for the price. They blow the harbor freight version out of the water.This particular chest runs $300+, and you almost never see them for less than $250, even used. If you...

All items sold. SOLD ITEMS FXK4 E710BCG Leatherman Wingman Kershaw/Snap-on Leek OEXM707B Snap-on 3/8" drive SAE socket set HBBD16 and HBFE24

I just talked to a friend at a BBQ earlier today, and he was telling me about his new job. Evidently, this employer requires all techs to mark all of their tools. I guess they have had so much drama and trouble with tools going missing, getting "borrowed" into someone else's box, etc., that they...

Snap-on, E-Torx/Torx set combo (w/Lisle), 12pt SAE 3/8" set, XDH810B, FS261, FS281 Got a few more items to sell... First up I have an E-Torx/Torx socket combo, The E-Torx are Snap-on (underline logo, but appear brand new and unused, mint cond.), and the Torx are Lisle (also brand new and...

SK Master sets, 1/4" and 3/8", Snap-on FD+ Rev. Combo set, WRIGHT Met. & SAE combos Everything sold, thanks everyone! SK 91848, 94549, 45152 SOLD Snap-on metric ratcheting set SOLD WrightGrip 907 and 950 Combo sets, SOLD

Midwest Utility snips, sell for $14 + tax, SOLD only reason for selling is I thought I lost mine and bought another pair, then found them Channellock adjustable wrench set, made by Irega, probably some of, if not the best, wrenches money can buy today. Sizes 4.5", 6", 8", 12". This was an...

I just picked up this file set from my Snap-on guy. I bought it to go in my portable tool kit; I was looking for a file set that came in a pouch because I didn't want them banging around in my bag. It turns out that the set doesn't fit in my bag, its too long by about 2". The 10" flat was...