Search results

I did just that . added an 8 x 12 lean , framed a 6 x 4 ft for the compressor .. put a sandblasting cabinet in the other part . insulated all the walls ,build my own doors ( insulated them as well , can hardly hear the compressor now , knowing that heat from the compressor may be a problem...

Ive had good luck with urethane .

Here.s an auto door lift I built a few years ago . one thing that I changed was to weld a piece of tuben across the front and it now has two wheels on front as well as the back . a small hyd jack is used to lift the door /

There is this one . http://www.garagejournal.com/forum/showthread.php?t=68451. I would like to see it or one like it made into a sticky / anyone else ?

My compressor feed two tanks , One that its fastened on and one bolted above it onto the wall , I cant see any reason why it would make any difference

Ive never been there . But you can try this http://www.downforeveryoneorjustme.com/

I have a squirrel cage fan , I just used the fan .built a case for it and piped it outside . A dryer vent outside ,, It,s been about 5 years and works good so far. lol well I just noticed the date this thread was started

I have a 140 Hobart Handler 110 volts and have put on more rocker panels than I can remember . I use 023 wire with gas

yes . yes it is . would be very to work with (shape)

I don,t see why a head bolt wouldn,t work . put a lock nut ( or double nut it ) so it can,t back off

Simple as this https://www.google.ca/?gws_rd=ssl#q=PEX+plumbing+www.garagejournal.com

If there isn,t a big rush . put something between the tire beads for a few hours . I used pop bottles once when I had the same problem , Left them overnight . next day had no trouble getting them mounted .

I just bought and installed a 10 ft by 8 ft C H I insulated . I like it so far

looks good ! . tractor,s are a ***** to paint

Thank you ,, The clamping leaf as well as the swing leaf were both the cutting blades from a road grader.

bending brake i.ve built a few years ago

I use a peice of angle iron about 2 ft long 1/8 thick . hold the saw on and rub the angle iron back and forth the blade ( with the blade turning ) a few times ,it will take the glaze off ,

Some very good insight in this thread http://www.garagejournal.com/forum/showthread.php?t=182565&page=56 page 56 post # 1110

I click on the thumbnail . it starts loading . then i double on it again , opens on another page fairly quickly

Nice peice of work . i built one a few years ago that is 5 ft , and i know its a lot more work that it look like .