Search results

I find myself looking for a good set of full size picks. Anything decent other than the truck brands? Would like USA or European, but not required. Under $50 would be nice to.

Looking for a USA made or European Vise. Would like something with 4" or larger jaws. Perfer Wilton Bullet or Record. Hoping to spend $200 or less. Located in Central IL, local would be great, but I'm not expecting it.

Looking for an old bench grinder. Looking for USA made Baldor or Dayton. Need to be close to central IL or willing to ship. Need 110v/ 1ph. Let me know what you have.

Looking for a good condition PWCS7 perfer red handles.

I'm looking for a wall mount holder to hold my prybars and breaker bars which are to long for my box. I would prefer one without the locking cover, and know that I have seen one made by a member here. Any ideas where something like that could be purchased? I know that I can make one, but if...

12-803 4.5-9 PSI 3/8” inlet – outlet The needle and seat assemblies that are installed in Holley Performance carburetors can sufficiently control fuel pressure up to about 8 psi. If the fuel pump is putting out more than 8 psi, a regulator should be used to keep the fuel pressure within safe...

Get double the use from your MaxJax with Dannmar motorcycle mounting plates. These adapter kits let you create two lifts with one MaxJax. Safely lift motorcycles, ATV's or other motorized vehicles to a comfortable working height. Get up off the floor! Work comfortably and efficiently with...

I bought one of the HF 4 drawer black service carts during one of their last sales and I am now looking for clever ideas for out of the way storage. I am also looking for ideas on the best gear to load into it. I know loading has been somewhat addressed before, but I do not think anyone has...

My dad gave me an old CM vise he picked up somewhere, and I am tring to freshen it up a little. The PO welded the jaws on, due to some of the retaining screws busting and others being frozen. I have cleaned the welds, removed the jaws and am finishing up removing the screws. What I cannot...

A while back, I installed a LM3800 opener on one of my two garage doors. This weekend, I installed the second. While testing the second opener I noticed that on this new opener, if the door is opened 24" or less, then stopped and closed, the door will jump up and down on the tracks, and then...

I recently installed a Liftmaster 3800 on one of my garage doors. While testing, I noticed a slight wobble, or flex in the motor while the door is raising. It is almost unnoticable unless you are working on the motor an looking right at it. Liftmaster says this is incorrect, and that I should...

In December of 08 I purchased two new garage door openers to install in my attached garage from Sears. I had never got around to installing them, or even opening the boxes. This week I decided that I wanted to go with Liftmaster 3800's instead of the trolley openers that I had, so I take the...

I have been storing my ladders on hanging horizontally on the exterior of my garage, but every year I have to replace the hooks because the wear out. I have been using the standard approx. 1" dia. galv. hooks that have the flattened area in the middle and the always seem to sag, and eventually...

Not really garage related, but I am wanting to change out most of the fixtures in my house to can lighting. My plan is to use the supply to the central fixtures of the rooms as my junctions to supply the can lights (either daisy chaining, or webbing out from the central juction) What I cannot...

So I have been wanting to upgrade my old Craftsman raised panels with Sears new Pro line of wrenches. I have been "somewhat" patiently watching the site for them to come in stock this past month to no avail. So this past week I have been emailing and calling the customer service center to try...

I am looking to upgrade my old raised panel wrenches for something a little nicer. I am interested in this set: http://www.sears.com/shc/s/p_10153_12605_00934951000P?vName=Tools&cName=Mechanics+Tools&sName=Wrenches but I figured I'd check here first to see what is available used. Or to see...

I am looking to purchase a set of wiring harness connector release tools as I am tired of breaking of the clips by using a screwdriver. I have only found this set by Kastar...

Anyone have any ideas to upgrade toolbox castors (5" I believe). I bought a Excel toolbox combo and as I thought the casters are fairly cheap, and I would like to replace them with a higher quality version. I really like the Snap-on spring style casters, but four of them would be more than the...